Ultimate HVAC Service/Install Van Tour!!

[@davidseymore3411]

Nice setup. Nothing like a organized truck!

[@eastonwilliams1722]

Van

[@geofffryer1187]

This setup is amazing. I’m a first year HVAC student and I dream of having a van setup like this.

[@BroBdoubleE]

I'm an 8 year tech, plumbing and electrical tech and I am building out a van and small trailer. This is the dream build. Most installed tool builds suck... show your boss this video.

[@henrymartinez8185]

That organization would last about 2 jobs in my truck; then I’d be pulling my hair out trying to clean it up again 😂

[@DiegoLTE]

Nah frrrrr

[@lcarter6981]

Excellent job organizing your truck! I really liked the fact that you placed value on keeping empty space. That is something most people overlook

[@Lewdacris916]

Most organized work van ive ever seen lol very sick set up, makes it so much easier to find what your looking for when its organized

[@malcolmwhite821]

It is cool to see all your tool. Been in the trade 27 years but the past 15 has been in controls. I don’t get to see all the service tools as my main tool now is my computer. Love what you are doing.

[@ZRock7771]

The production quality recently is very impressive. More commercial content please, as a commercial tech, I find residential videos boring but I still watch for the quality. Nice truck man!

[@RaceDude57]

I noticed the production right away. Didn’t even waste 20 seconds and got right to the point of the video, love when creators do that.

[@michaelfassino4314]

You are the most organized person/tech that I have seen. Perfection !!!

[@donaldstepp4850]

I really like the design looks like its not too hard to maintain because its well thought out

[@makanahapakuka3485]

My guy that is a clean and organized van!!! I am definitely gonna take notes for our techs 😆

[@cebasmb8250]

These vans are the best for setting up into, I just like that you can stand in it.... I have one and set it up myself sweet van

[@pridemechanical815]

That van is way too nice and new for me. I like struggling to get and find what I need out of my truck.

[@kylecash6697]

Very well organized what’s the total cost on fitting this truck for all your tools and etc???

[@Jfriesheatingandcooling]

Just got me a 23 transit mid height, outfitted with ranger design as well. I put the legend floor in with diamond plate trim. Absolutely love it. Now i just have to letter it up and fill it.

[@mrcoollu9662]

Super neat idea 💡 make sure you have a fire extinguisher 🧯 too and first aide ..

[@hotfeva9843]

I would honestly like to see the 1hr long version this is 🔥🔥🔥motivation 🙏🏿

[@tommyaoi1183]

💯😁

[@Daniel.Smithhvac]

Love the van setup! Nothing like an organized van. Only question I have is, where do you keep motors and bigger parts stock?

[@drew22]

Never seen your setup but mine is very similar. My shop vac is a corded Ridgid that takes up the same footprint. The transfer pump idea was really smart I’ll definitely add that into my set up. Thanks for sharing man

[@victorhvac5722]

I’m glad I watched this. I was about to order a different set up but I think I ll switch it. I use my van also to do installs. Thanks. Good job

[@Dillonmechanical]

Man I could never be that organized! But I love it! Great job man

[@HappyYummmy]

you never will

[@gustavobermudez3722]

Felicidades por qué eres un profesional. Un profesional tiene que tener todo bien organizado así ya sabe en dónde están las cosas y no tiene que estar perdiendo el tiempo en buscarlas y que bien equipado está con toda la herramienta que se necesita para hacer el trabajo pura herramienta de lo más nuevo y de última generación

[@mikehellekson]

Man I love the way you have your rig setup! Gonna have to do some reconfiguring on mine now!

[@mrpatter19888]

Nice set up, I run a Nissan high roof too, has been a great van for me. I don’t know how on earth you run a business, have a multiple kids, handle all your calls and installs and keep a van looking like that lol

[@wagnergitirana]

Very nice set up for sure! Cheers from NW Arkansas, soon to be back home in Texas 👍🏻 One more thing : those tracks on the floor reminds me of the ones that cargo planes already have. It should be more availability to cargo van owners to access those tracks but they are hard to find. And when you do, that are outrageously expensive.

[@Justbecause01]

You are living the dream, I wish I could have a setup like that. Love it!

[@JonahBrun]

Would love to see a video on the type of UV dye you use, if any, and the best way you have found to add it into a system.

[@TheDpkustums]

Great storage is so important.good job Zack

[@JohnSmith-ms2cl]

Hey mate, great setup! Really well thought out. One suggestion, have you thought of setting up a suspension bracket system internally to hold the ladders? Instead of having the extensions which are longer by default, swap out to an A frame which folds out into a straight single sided ladder? Sa a -6 or 7 foot which obviously flips out to 12-13? That way it’s easier to grab and you don’t have all the drag up on rhe roof? Also makes it easier to park in lower underground carparks etc? Otherwise sweet as!

[@DavidHernandez-gt9bo]

Super nice !!!! Everything organized as usual . Wow …tons of dollars invested in your van keep the doors locked 😎

[@martijnkreber]

I have been following your videos for a while, but you might still want to look at passive ventilation in the roof of your commercial vehicle given your refrigerants and nitrogen. So if it leaks it can escape. Greetings from a mechanic from the Netherlands.

[@BeastMan2496]

Really appreciate the magnetic umbrella idea being a mobile mechanic I’ve been looking for solutions to beat the heat I might have to run one with a microfiber to protect customers paint

[@stevenhahn8238]

Nice setup - clean & organized 👍🏻

[@ricmendes13]

I like it a lot, the only things that concerns me is the van’s balance. It seems that all the weigh is on one side of the van.

[@Raulachu]

Nice for install, overkill for service calls. The street level pull tray is slick though.

[@snpdg1]

Good job as usual

[@PEPL515]

Hey man great video. Just commenting for the algorithm thanks for sharing all your knowledge with us.

[@markcotter2355]

You say all you like is red and black, but I see some yellow in that van, I think all you need is a DeWalt impact driver or sawsall.

[@MrBdogg317]

Bro I thought my van was well organized. But you may have me beat. Very nice.

[@raulgarcia528]

Vato Eres buenisimo asiendo TU trabajo bro. Todo trabajo empieza por la organizacion y ESO Trae exelente s resultados en Todos Tus TRABAJOS. FROM HOUSTON

[@je9893]

Super organized and well prepared

[@SoloG_0]

now all we need to get from you is an apparel video!!

[@juliobello2783]

😂 Y :::: ☆ The Water Hose ☆ The Extension Cords ☆ the Ropes ☆ 115v Blower Motors 1/4hp 1/3hp 1/2hp 3/4hp 230v Condenser Motors 1/4hp 1/3hp 1/2hp 3/4hp 1075rpm Plus 825 Rpm Motors I didn't see any Coil Cleaner 😂. Just Kidding Bro. Ur van Looks Amazing It reminds me My Office Set up Longggg Time ago.. When I organize & cleaned Looks Beautiful & amazing Only For a Day or 2 By the end of the week With 20 Plus Projects going on at the Same time Office was a Disaster by the end of the Week........ 😪😪😪

[@diyhvacguy]

Thanks for giving us the tour! Your rig is slick. I’m decking out my 12’ enclosed trailer right now. This has given me some ideas 😊 I think Milwaukee should just make a packout van 🤣🤣🤣

[@thanhnguyen-su6bj]

wow very nice set up for things organize,

[@nocommentarygaming7031]

please make a video on what you have in the milwaukee packout boxes and also the tower shelves boxes as well please

[@carystone7168]

Nice van setup! Can you do a shop walkthrough. I think the last one you did the building wasn’t complete. Take care!

[@maratkh5835]

Thank you for the video and review of your tool. Can you tell me why you chose this brand of car for work, and not, for example, a Ford Transit. I would be grateful to hear your opinion and your personal experience using the car.

[@tommyaoi1183]

Very Nice. ❤❤❤😊😊😊

[@maracservices]

This is awesome. Vans are the best haha!

[@thebeastytank]

What do u keep inside those fittings and parts boxes ? Like do u have a breakdown video of what’s inside ?

[@quengaskhan7171]

Very very nice set up man.

[@robertjohnson4939]

Great van layout, great information for someone starting in the industry

[@jfiguet205]

Question! Do you know if exist a Part list and tool list what a HVAC shoul be have in a Truck?

[@HVACR954]

Have you done a video on the Hilmore line set cleaner ? I bought one but skeptical of using the pigs. Let me know when you think.

[@martinheatingcoolingmartin4693]

I like the organization. Excellent set up! Could you be this organized if you added another service and install type to what you already do? Like hydronic systems with oil or gas burners? I notice, you carry more tools/hardware than you do actual parts and items? I’m over loaded with controls and valves and fittings and everything from A-Z. Which leaves me barely any room to be that organized with tools, etc. Anyone know what I can do? Should I seriously carry less to keep the van more simple and organized? Maybe do the seasonal swap of items, that’s a good idea. Most my items stay on the truck for a year before I even use them.

[@MegaDysart]

Buckle down and really keep track of what you use, how often and try not to overstock yourself. If you gotta make a spreadsheet, do it. You'll probably find that you're wasting a ton of space stocking multiples that you dont necessarily need and depending on how often you go to the supply house, you could justify cutting a bunch of extra stock out.

[@martinheatingcoolingmartin4693]

Excellent advice, thanks man! Will definitely consider trying this

[@maxreed501]

Ya need both tools and parts, that why I drive step vans loaded to the gills and easy to climb into. Yup bad mileage but a lot cheaper than trips back and forth.

[@thornhillplumbing]

What do you do for rubbish/garbage? Please let us know your method thanks

[@kobie4238]

Sick setup!

[@jamescollins8148]

Awesome! Great set up! I’m jealous!

[@Matt___]

Geeze thats a nice setup

[@michaelspires1165]

Man! I can't keep a tackle box organized!😂

[@joequalletjr.8328]

Nice truck man

[@HVACSuperTechWannabe]

We would like to know each specific part or tool in each box

[@KelekoBoy]

Very nice setup!!! Love all the Milwaukee tools and pack outs. What about the front can of your van? Any special organization or setups you got going on? Very curious. Nice van!!!

[@charlesleake930]

What year did you get your master license... ? how many years and where did you work as an apprentice ? and what training if any did you receive ? because some people can home school.....cause they have that ability ... Jay

[@estebanfuentes5342]

Nice set up very organized for every service call. How much was that tool box

[@TheOneshot78]

I won't place any nitrogen or burning rig on the rear, because if you get rear ended u become a rolling sparkler.

[@wtaylorhudson3702]

Nitrogen is an inert, non combustible gas. Are you concerned about the rocket hazard if the valve head is sheared off?

[@IDrag]

got a link to the magnets you like to use? like the ones for your torches?

[@mrtonge5323]

Sweet setup

[@neverfalter6702]

What brand are the yellow and black storage containers on the tower?

[@Sohrab865]

Made by ranger design

[@Hvacgordo]

I haven’t seen the floor of my van in three months

[@godfloyd]

That's great VAN!

[@igorbulanov904]

I just need that sliding tool box.

[@AVR-hf1rl]

By chance do you know of an app just for refrigeration

[@zahedaminullah6934]

Flawless! Good job man.

[@vincentgelles3805]

Very nice, organized and professional looking setup! Only knock I have is the RLS press fitting garbage. I’ve been flowing nitrogen and brazing for 20 plus years and I don’t plan on stopping now. I will never trust an o-ring like I do a properly brazed joint. To each their own but it’s not for me and I will never use it. Also, it’s not like you can use it to change compressors, reversing valves, TXVs etc., so if you still have to carry a torch just use the torch for everything.

[@89dhvac]

Well said and I agree.

[@ochoa241976]

Where did you get the tool box from what model is it?

[@turbolag98]

No Motors, Universal circuit boards, 407C or T-stats? U must go to the supply house on almost every call

[@justinlmazzaferro36]

Nice setup! Are you running solo again? Haven’t seen Trevor in a minute.

[@Jnash2030]

I pretty much just ordered the exact same setup. Regarding the refrigerant tank rank they come with a 3 stack or 5 stack that holds 30lbs tanks and 50lbs tanks. Which size does your hold in the video?

[@curryjunior7708]

What brand and model of acetylene equipment is it friend? 😮

[@carlospavao1557]

What kind of tool bag is that? Thanks!

[@tristan8054]

How are you still liking the van? Any changes?

[@ayoutubewatcher7009]

Im curious to know how much you invested in your truck?

[@Dillonmechanical]

Where do you keep your batteries?

[@paulrozinski1488]

Nice set-up. Be thankful that you’re not operating anywhere in NYC because it’d be gone in 10 seconds or the contents sold on the street for crack.

[@diyhvacguy]

😂😂😂😂

[@mustanglenn]

Where’s the fan motors ?

[@spencerholcomb4080]

Do you carry contractors? Transformers? Relays? Motors etc? I didn’t see any or maybe I missed it.

[@bingfenglyu4654]

Hello! I am your fan and I want to buy Ranger Design Aluminum Tool Drawer for Cargo Vans (48 x 14 x 16 in) on the website you recommend. Do you have a coupon? Thank you!

[@ernestodiaz76]

Where your filters are?

[@seanfreyy]

whats your current boot and pant go to?

[@dopeasyoda1011]

What kinda boots do you wear as ur daily

[@diyhvacguy]

Duuuuude, I know you weren’t asking me but I discovered these. They’re flipping amazing, super comfortable and no laces to tie. they have a loop in the back so they’re on in like 5 seconds. Wear them every day all day. I’m gonna get me another set soon. Cheers man amzn.to/3DKKx01

[@povoljan13]

Where'd you get those magnets?

[@martinheatingcoolingmartin4693]

I’m surprised you only carry one recovery cylinder?

[@eliblum9461]

Please show me that transfer pump

[@DaltonLogsdon-q5r]

Do you use the m12 vacuum to clear drain lines

[@dillonlexington]

Can someone answer a question, I use the 4 port manifold for vacuum I am thinking about getting away from it, so my question is which side (liquid or suction....and I think I just answered that when I wrote it, but still would like a confirmation) do I attach my micron gauge to? Thanks in advance and please be nice, like I said I think I answered it, but want clarification.

[@nicholaspoole596]

Furthest point from your pump. I usually attach to the liquid line port on equipment and pull vacuum from suction line port.

[@randygutierrez4965]

A good method to do when you have the space. Is to buy 3 vacuum rated valve core removal tools. Attach them to your suction/liquid side remove your schrader valves. And attach your 3rd tool to your suction side valve core removal tool and put your micron gauge on that tool. So you have the ability to not get the gauge contaminated with oil. Since it’s a ball valve type. Buy two vacuum rated 3/8 hoses. With a 3/8 fitting and 1/4 fitting. 1/4 fitting is for your valve cores and 3/8 for your vacuum pump. There’s more videos on KZbin. For better detailed explanation on KZbin. Look up A/C Service tech.

[@ducharmehvactraining925]

excellent thanks!

[@moisesmartinez6693]

😮😮😮 GENIAL 👌. Saludos BR

[@garciajr913]

Nv2500 suck i had mine for 3 years now and my sliding door won’t open and been repaired so many times

[@scotts4125]

Nissan also has transmission problems. The Chrysler of Japan.

[@garciajr913]

@@scotts4125 yeah i heard that’s why they discontinued them last year

[@ammonsequiptment9877]

Why would you not label the boxes!?