this is the biggest white oak log that Eddie ,ZZ and I ever tried to saw on this mill. Hope you enjoy! We have a online store at markgalicicchannel.com/
Пікірлер: 618
@bryantmay42994 ай бұрын
I know alot of people think boring , but I love to watch it, since I am an arborists, past 30 years ,
@doc33569 ай бұрын
Don't get too hung up on your critics!!😂😂 we love your videos!!
@markgalicic77889 ай бұрын
thanks .
@williampatrickfagan759028 күн бұрын
I'm not criticising. I'm merely pointing out best working practice. The working practice there would not be tolerated in the European Union. Shop would be shut down due to lack of Health n Safety.
@dougsmith5489 ай бұрын
Way to go Mark. That was an excellent demonstration of a superb Sawyer. What a beautiful log and you with your talents got the best out of it. Stay safe and God bless. 🇨🇦✌️
@markgalicic77889 ай бұрын
thanks Doug.
@Pyle818 ай бұрын
Mark, So the biggest log i ever moved was also a HUGE White Oak. Back in about 1994 I was hauling Timber out of the Midland,Pa area (Down there near you guys) And on the North side of town, Up on that hill that over looked the City Park. Back up on that hillside that faced the SE, Here stood this MONSTER White Oak that had been hit by lightning on one of the 3 large upper branches. There where a total of 4 large White Oaks up there within about 25 yrs of this monster, That where likely seedlings off this old oak and they where probably 100-120 yrs old then according to the Arborist that the City hired. And his advice was to remove this larger damaged tree and let the 30+ smaller trees get some sun. The Arborist figured that old tree was somewhere between 220-228 yrs old at the time. The first 2 logs where taken out of the woods at 26 ft. The butt log was egg shaped and at the narrowest point was 63". They cut it in half at the landing. And we chained it the the Prentice Loader and lifted the end up and had the shudder push each log up on to the rear of the trailer. I check to see what the guage said with just those to logs on it. And it was just under 10-K lbs. I got that whole tree loaded on the truck. And had just about 44-K from just that one tree. There was some Popular in there that where in the 40" class. And some Red Red Oak that made Vener grade logs. I wish I had taken pictures of that job. 1994 was long before cell phones with a camera.
@johnritchie38899 ай бұрын
I love watching guys work while I sit here with a cocktail.
@markgalicic77889 ай бұрын
that sounds good!
@catgynt91489 ай бұрын
Drama at the circle mill.... Thanks Mark, after seeing a video like this one I understand your appreciation of smaller, boring logs. Thankfully you team were able to demonstrate man-handling logs without getting hurt. Wishing you and your team a great weekend holiday with family and friends. Peace brother
@markgalicic77889 ай бұрын
thank you , great comment.
@tomtd9 ай бұрын
Six retinal detachments later, lasers, needles in the eyes, but thank God if only lost some peripheral vision downwards. Some unlucky people wake up and realise they are blind withe the retina fully detached. Never ever ignore the incredible blackness rolling up or down like a blind, usually preceded by lots of black floaters. Mine were attributed to my motor sports history banging my head around in a rally car years ago. Take care and no rapid head movement from now on, and good luck with it all. Great videos, good commentary too, somehow relaxing in a strange way.
@09FLTRMM779 ай бұрын
Well, you win! I’ve only had 4 LOL! Two in each eye, first one when I was 16 in 1978. That one cost me most of the vision in my right eye. Technology back then wasn’t what it is today. The surgery’s have come a long way since then.
@markgalicic77889 ай бұрын
thank you , this is my second time for my right eye.
@lewiemcneely91439 ай бұрын
Glad you're doing better and when my eyes get dilated it looks like an ice storm to me. There's GOT to be safety at a mill or a lot of funerals and/or trips to the E.R. And it don't take all day for something to fly all to flinders. Happy weekend and God Bless
@markgalicic77889 ай бұрын
thanks Lewie.
@lewiemcneely91439 ай бұрын
U 2, Uncle Popeye!@@markgalicic7788
@vicmurphy11809 ай бұрын
when i was a teenager my dad and I split white oak logs to make fence post. none were nearly as big as that monster thankfully.
@markgalicic77889 ай бұрын
locust post?
@jeffsmith49649 ай бұрын
That was always my favorite part when I sawed. The unexpected lol. Yes you have to stay calm at all times. You men did a fine job. Thanks for sharing the video.
@markgalicic77889 ай бұрын
thanks Jeff.
@jamescates97719 ай бұрын
There was so much in this video which gave credible reason why you make stop signs while cutting large diameter logs. Great video Mark! Keep up the good work. And prayers for you and your eye issue.
@ChristinaCalhoun9 ай бұрын
Nuts319 has a good sledge hammer swing
@markgalicic77889 ай бұрын
yes he does very strong.
@ChristinaCalhoun9 ай бұрын
@@markgalicic7788 that swing that nuts319 uses is good way not to tire yourself out fast
@timberedridge72249 ай бұрын
If John Henry would have used that swing against the steam-powered drill his heart would not have quit. Excellent job.
@johnyakovich10177 ай бұрын
Hey Guys! Absolutely amazing! I taught Jr. and Senior HS from 1975 to 1980. Two Families owned Saw Mills, they were brothers. They had walnut for plaques and Pine for pallets. I was there! Amazing! They were not as big as YOU but I did NOT know much about sawing. I AM Amazed! I loved to watch them and love to watch you all! Thank You!
@Chr.U.Cas22169 ай бұрын
😱 That was quite a shocker respectively frightening. I was happy to see that nothing got damaged. 2) Strangely I let myself distract by the two discolorations on the blade. 3) You are absolutely right, shaping down a big log with the sawmill is better. By the way: Nice to hear that your eye is better. Best regards, luck and especially health to all involved people.
@markgalicic77889 ай бұрын
thank you , great comment.
@allenfeltz68329 ай бұрын
Mark, I had detachments in both eyes, one in 1972 another in 1973, the '72 detachment left me completely blind. Both repaired and have had no problems. Have yearly check-ups. Good luck to you .
@markgalicic77889 ай бұрын
thanks Allen.
@Bondecieo7 ай бұрын
Who the hell would have anything bad to say about these videos nice work. Learned allot. Thank You💪💪
@timothykiggins16012 ай бұрын
Mark, very impressive videos, thank you very much!!!!
@LostAbroadVideos7 ай бұрын
Hearing protection sir. >=85dba single hearing protection. >95dba, dual hearing protection. Add to that, eye and hand protection. It's a choice, but we need only ask ourselves what our next long weekend or holiday with family would be like without hearing, sight, or a hand. It's a choice we make.
@roberthagood47709 ай бұрын
Good to know your eye is doing good. Stay safe and may GOD bless.
@markgalicic77889 ай бұрын
thanks Robert.
@davidhaynes312628 күн бұрын
I love quarter sawn wood 🇨🇦 It’s always a pleasure to look at, and work with.
@esbrasill17 күн бұрын
oh dear, keep that guy away from the chainsaw. He just butchered that log!
@bay98769 ай бұрын
Nice Milling getting the quarter sawing done, and nice work splitting that white Oak log.
@markgalicic77889 ай бұрын
thank you.
@keithmclennan32759 ай бұрын
i have cut alot of logs and you do a great job of reading each log cheers from BC Canada
@markgalicic77889 ай бұрын
thanks Keith.
@telekaster199919 ай бұрын
That could have gone horribly wrong real quick. Good job Mark! You can't buy experience.
@markgalicic77889 ай бұрын
thank you.
@rodcros5 ай бұрын
Wow! Strength and endurance are impressive in the guy splitting that log. Outstanding video on quarter sawing with a circular saw. It's easy to see why quarter sawn oak is scarce and expensive.
@patrickhankin99039 ай бұрын
Hi Mark, great video. Thank you. Even when you have a difficult extra larger log, follow the process. It works every time. If a curly situation arises, adapt the process. A great video to wake up to and provide a positive start to the day. Thank you
@markgalicic77889 ай бұрын
thanks Patrick.
@joewhitney40979 ай бұрын
This was interesting. Quarter sawn creates challenges for round saws is no joke. Thanks for sharing.
@markgalicic77889 ай бұрын
thanks Joe , that's why we don't quarter saw on this mill.
@clarencedobbs736218 күн бұрын
Mark i love the show,im disabled not able to work anymore .i really enjoy seeing how its really done.
@andrewodempsey26627 ай бұрын
My grandfather established a sawmill and handle factory here in Queensland Australis long before I was born in 1964. My Father was employed by him just after he came out of Natioanl Military service in the Royal Australian Airforce. Theres an old photo of my father and crew setting up a Canadian Sawbench. It would have been pre 1960. He eventually met my mother at church and we all grew up, 11 of us, with timber in our blood. My father was a timber getting supervisor and on school holidays, I often went bush with him in South East Queensland to open gates for him as he wrangled the crews. They were great guys and taugt me a lot of stuff about life etc. Well, inspired by that, I have had a very successful career as a surveyor. I am never happier than when I'm in or near good timber country and its an absolute delight to see folk working logs into good building materials. Timber is sustainable. It locks up carbon for a very long time. The environment where timber grows supports habitat for all manner of critters. For timber, we take the upper story an pioneer species flourish below. Then the next generation of millable timber comes along and the cycle begins again. Love your work guys! Very special and memorable for me. I've been a surveyor for 43 years but sawmilling always grabs my attention. KEEP UP THE GREAT WORK!
@remmiemax36249 ай бұрын
Congratulations on 69K! Good news on your eye!! As always a 😎😎😎😎Video!
@markgalicic77889 ай бұрын
thank you.
@jeromyw385xp9 ай бұрын
hay Mark I like your setup and love these type of sawmills. wish you were local to me here in Michigan I'd run out there for a bit and see your setup up close and chat about buying logs from me thanks and be safe
@ChristinaCalhoun9 ай бұрын
Nice first quarter log roll onto the carriage
@markgalicic77889 ай бұрын
thank you.
@sharonromer66069 ай бұрын
Love watching the good...the bad and the ugly👍
@henrycole87055 ай бұрын
People are irritated about everything it seems. I watch to see some of the gorgeous wood. like the cherry
@jackarmer85609 ай бұрын
Hope Sammy Safety enjoyed ride. Have a great day Guys
@markgalicic77889 ай бұрын
thanks Jack , he sure did lol.
@ronmccabe71649 ай бұрын
Excellent learning experience. Thank you.
@markgalicic77889 ай бұрын
thank you.
@grahamhall21059 ай бұрын
Enjoyed the video guys. Good to see something different and some of the things that can go wrong.
@markgalicic77889 ай бұрын
thanks Graham.
@timmaggard88629 ай бұрын
POop on the nay sayers, You guys are doing a great job! Tough job you guys do. And you do it well! Thanks for your videos. They make me happy!
@markgalicic77889 ай бұрын
thanks Tim.
@jerryking24189 ай бұрын
Looks like somebody is going to get some pretty furniture. Glad to hear your eye is recovering.
@markgalicic77889 ай бұрын
thanks Jerry.
@richardthornhill46309 ай бұрын
Good job. You guys are pros. Experienced.
@markgalicic77889 ай бұрын
thanks Richard.
@johnyakovich10177 ай бұрын
Good Luck! And I hope your EYE keeps getting Better! Keep it UP! John
@patrickhosking69309 ай бұрын
Get well soon, Mark. Hopefully your vision hasn't been affected. Love the boom!
@johnking86799 ай бұрын
Another "goody" !!
@carlgomm96999 ай бұрын
One awesome show, never seen this done before, thanks for sharing !!
@markgalicic77889 ай бұрын
thanks carl.
@properlynumb70929 ай бұрын
Real nice creative sawing to find a few good boards out of that last quarter log.
@markgalicic77889 ай бұрын
thanks.
@user-kn7sf9fk9h9 ай бұрын
I enjoy watching you guys work, turning logs to lumber i also saw the safety guy on the light guard you need to have a talk whit Sammy to stay safe , HAVE a GRATE WEEKEND PS hope your eye is healing fine GOOD DAY
@markgalicic77889 ай бұрын
thank you.
@tsant65919 ай бұрын
Mine detached for no reason too Mark. But it's fine now. Glad your follow up went well! Thanks for the update! Be well
@markgalicic77889 ай бұрын
thank you.
@Hockeyfan98847 ай бұрын
I am up in north Canada. Used a lister diesel to saw small sized logs with the belt twist from motor to blade. Each log you saw, I smell that, and a sawmill smell, well, it's Awesome.
@bhubbard4917 ай бұрын
Cutting a log open is just like having Christmas morning! Each new board is a gift; it might be great or it might be a bit of a disappointment. Excellent video, fellas!!!
@tomjoseph14447 ай бұрын
First time watching your channel. Really nice. My dad and I used to go up to a saw mill in KY and pick up a truck load every year. They would invariably have one bent tooth in their blade which left saw marks so bad that you had to take another quarter off when planing .
@alexkirkles50669 ай бұрын
Ten o’clock in the morning brew time bacon buttie and watching you guys , split logs for the mill as an apprentice Sthil 090 saw fourty odd inch bar made you sweat, hope the eye gets better soon todays job making square nuts 7/8 whitworth thread for a vintage machine you need a big spanner , thems nice boards coming off the mill you guys have a nice day
@user-po8iq7uh6c9 ай бұрын
That was nice lumber but a pain to saw you had a problems but solved them guick nice job keep up the good work thanks for sharing.
@brianr858126 күн бұрын
Little bit of pyrodex makes that job much more enjoyable. I split our oversized logs in a similar way except after the score cut I drive 2 slats about 4 " apart. Pour some in. Drop a wick in. Then I drive another 4" long slat to plug the hole. Done rite it will pop em rite in two wo any damage. I have tried it wo a score cut, just using a plunge cut and natural seams. With good outcomes. Made splinter piles out of a few learning though lol
@williamturkewitschturkewit15499 ай бұрын
Very interesting video Mark. Loved the quarter sawing, that's some beautiful wood. Fun to try different techniques
@markgalicic77889 ай бұрын
thanks William.
@realnikonlover6207Ай бұрын
A chunk of that beauty would have made a great mantle piece for my fireplace. Delicious.
@johnnyhodges79578 ай бұрын
Chasing the tiger . Love the grain and stability . Got a 32” red oak. Going to saw it same way . Keep it real. Hope eye heals up soon .
@trudareynolds85927 ай бұрын
I keep watching these! Why? It is just fascinating to me.
@benjamindejonge36249 ай бұрын
Congratulations, finally after all this years a quarter sawn oak
@markgalicic77889 ай бұрын
thanks.
@ghost65008 ай бұрын
Excellent work! thank you!
@louisebrown28877 ай бұрын
Enjoy watching you guys
@vdpeer9 ай бұрын
Man that's some nice looking wood coming from that log. White oak was one of my favorites to work with...and cherry.
@andrewriches5069 ай бұрын
Good evening from Lincolnshire UK. Pleased you are on the mend Mark.
@markgalicic77889 ай бұрын
good evening andrew.
@scottmcfarland11779 ай бұрын
If it was easy everyone would want to do it! Nice too see quarter sawn that wide AWESOME Stick of lumber
@peterstringer32859 ай бұрын
I enjoy your vids - so normal, natural.
@user-xs3by4re7j9 ай бұрын
Nice to see you are such good sport to the eye issues.
@markgalicic77889 ай бұрын
thanks.
@jimhammer20127 ай бұрын
A very worthy log for quatersawing!!
@adriancartlidge40189 ай бұрын
Great video Mark and Eddie and ZZ Mark, the grain on those boards looked stunning for furniture. Hope all goes well for you when you go back to the hospital, here's to a speedy recovery. Take care.
@sammystafford83778 ай бұрын
I really enjoy the videos! God Bless
@DewJohnson18 ай бұрын
the loader is a boss! love it!
@jerrysheppard91299 ай бұрын
I think you’re doing a great job for the responsibility you have🎉
@markgalicic77889 ай бұрын
thanks Jerry.
@thomasbeerman55007 ай бұрын
Satisfying watching ! Calms me!
@johncollins67557 ай бұрын
...Disclaimer...I am not a "lumber man", I have no expertise in running an operation such as yours...But...what I saw (unintentional funny) when you first split the log with the chain saw, was the outcome it would have when running it through the main saw. I do not know if you would do this on a majority of your trees, or any, or just this once for this video. As you split the log initially with the chain saw, you lost several cuts out of the middle of the tree, due to the need to true the faces of that log, before you could get any "boards".. There should certainly be another way, that is much more precise, to prevent this, if and when you find the need to utilize the chain saw operation............I enjoyed the video and want to thank you for this production...blessings to you all....
@grahamcifuentes44517 ай бұрын
i have even less experience than you, Johncollins, but I agree! Then they put the first half on the mill, and wasted the first three boards! I would have thought that, seeing as how they were dealing with the money part of the log, they would have squared the log up after the first skim cut, and left the unevenness for the sapwood at the tail of the process!
@The_DuMont_Network7 ай бұрын
Gotta side with you on this one.
@CCRobertsCarpentry5 ай бұрын
Enjoyed watching been watching for years thank you hope your eye gets better.😊😊😊
@jerryhubbard44614 ай бұрын
When I was little boy, now 71 years of age, I use to go with my uncles to the saw mill above our town. It was a really large mill that only cut pine that was hauled from all over the county of Fairfield in South Carolina. I remember a 671 Detroit running the mill. Next to the mill was a small gully where they ran the saw chain to carry the saw chips. I remember that saw mountain about 50 or more feet high and we loved to play on that saw dust pile. When the mill was running, you could hear it for a long way off. About one mile from my house now through the woods is a family run mill that is very old. Still running every day sawing rough pine lumber. Not much oak. They used to have an M&M gas engine running the mill. Finally moved to electric and still running the circular blade.
@Mutlap3 ай бұрын
energy cost comparison between the two. The main reason for switching I can guess there are many reasons but I would like for you to tell me.
@jerryhubbard44613 ай бұрын
I am sure the electric motor is much more efficient as per fuel handling and maintenance on the engines. The guy that runs the mill near my house is of a different bread. lol. His daddy built a farm way back when it was country. He raise cows and hogs. He also has a lot of land not far from the farm where they grow extra corn and hay. The saw mill was another way to make money and most of the lumber is sold to locals. Most is southern yellow pine. The older dad a few year back and his only son now runs the farm and mill. The son, also has an agriculture degree from Clemson. He lives in the family farm house that he has totally renovated. Two story big house sitting the hill surrounded by 150 acres of pasture and now subdivisions. Country in town. The mill is still in the same place it is was when first built. In a hole with NO room for trucks to come and go. About 20 yards from the mill is pasture land flat and pretty. I ask him why he does not move the mill to the pasture. He said his daddy told him to over move the mill as it was not easy to set up. This boy is loaded with money and could easily purchase a new mill. But he is content and country as hell. lol A good old boy but stubborn as a muslim. @@Mutlap
@rickharris71978 ай бұрын
I love to see fresh cut white oak. My favorite hardwood. That is a nice looking stack of oak.
@jackx43119 ай бұрын
Old but *very* true saying: "Show me somebody who's never made a mistake in their life, and I'll show you somebody who's never made *ANYTHING* in their life."
@timharris68358 ай бұрын
I think that was a job well done, the timber sure did look good, I hope you folks find your market for this wood, I think it will make great furniture wood.
@vancochran73447 ай бұрын
I have been watching you guys cut logs for a while now. I really like seeing the way you work! Keep up the great work. I hope your eye heals fast Mark!
@tomblount56359 ай бұрын
Best wishes with your eye!! 🎉🎉 Luv yur vlogs
@duanepayne18058 ай бұрын
That sure is a good cutting saw!
@johnvaluk14019 ай бұрын
I know you say you don’t like to quarter saw logs. But is sure is pretty!
@TheMarkBell9 ай бұрын
Boom! A very enjoyable video all round.
@Outdoorswithlogdog7 ай бұрын
Best sawmill channel on KZbin.
@denniscastle9369 ай бұрын
Nothing to be sorry about!!! He should just pay attention to the fascinating sawing process rather than criticizing the narration. Great video guys, you work hard at making it look easy!!!!!
@markgalicic77889 ай бұрын
thanks Dennis.
@suemoore19656 ай бұрын
❤️💙 I love watching these videos 💚💜
@FairlyOldGit9 ай бұрын
It's Winker Galicic ! 😉 p.s. Best wishes for a speedy (eye) recovery Mark!
@markgalicic77889 ай бұрын
thank you.
@VTiredIron7 ай бұрын
Dude twirling that 10# sledge like a toy. That’s real work.
@kitbaker85217 ай бұрын
Swinging in an arc. I learned that driving spikes on a drag line rail track. Works good so no real lifting of the hammer head. He’s a real expert at it.
@drewzilla48007 ай бұрын
good to see the two flags flying, along with the others. Merica!
@thepubliceye9 ай бұрын
I would love to see Wranglestar or even Fairpoint Farm split that log, they wear $300 worth of safety gear just demonstrating a 6-in battery-operated pruning saw. They even wear earmuffs and hard hats.
@markgalicic77889 ай бұрын
that would be funny lol.
@InquisitiveSearcher9 ай бұрын
Yahoo!! At least this beautiful oak stick wasn't cut up into planking!!! 😏
@markgalicic77889 ай бұрын
it will live on in some nice piece of furniture.
@Jeff-Lynn2 ай бұрын
Beautiful job
@johnshelley25409 ай бұрын
Mark you should explain about the figures in 1/4 sawn and how veneerers love them, nasty felling shake but you handled it well. thank's for another good video!
@markgalicic77889 ай бұрын
thanks John , great idea.
@njmileur50037 ай бұрын
We used to go to the saw mill up in Ft. Bragg , Ca. A couple times a year, I would watch the guys work at the mill for hours, I really enjoyed it. So much work, and hard work. So I am enjoying watching you.
@kingadaroad65955 ай бұрын
Ft. Bragg, CA brings back fond memories of a lady I met there. We spent three days together back in 2004 and I will never forget her. Never saw her again.
@paulrcreech77319 ай бұрын
Love to see the old cars
@johnquinn38999 ай бұрын
Learning some new stuff today !! John
@markgalicic77889 ай бұрын
glad you liked it John.
@alvarsdzenis47398 ай бұрын
Watching that guy cut hardwood with that "left coast" softwood saw was almost painful.
@OHJUSTFORKU8 ай бұрын
Watching that guy trying to cut anything is almost painful.
@sandrastaley53339 ай бұрын
Exciting day at the mill.
@Mrbekay6 ай бұрын
I had a detached retina on a Friday emergency surgery repair following Tuesday the other one went worst time most invasive painful procedure I’ve ever been through if it hasn’t happened to you you can never understand. Glad you’re ok. Love your channel and your mill. I found you from Andruw 👍
@PitViper329Ай бұрын
I love how the gnome went along for the ride. :D
@Z-Bart9 ай бұрын
Beautiful log and lumber. Too bookoo for my manual mill. 👍
@markgalicic77889 ай бұрын
thank you.
@joevalencic52758 ай бұрын
Two years ago I also had a detached retina for no apparent reason. Had it fixed at the Cleveland Ohio VA by the top retina surgeon from Cleveland Clinic, who is also on staff at the VA. We’re truly blessed to have some of the worlds best docs in Cleveland, and many of the top surgeons also teach at the VA. If you have to get sick, Cleveland Ohio is the place to do it. My recovery was quick because I did EVERYTHING THEY TOLD ME. Hope your recovery continues as well as it has.
@raysecoy66899 ай бұрын
great job guys from start to finish I was really into watching you still managed to get some wonderful and great quarter sawn boards its always a crap shoot anyway good health to all