I now have the DNA two stage air filter and high flow filter cover, with the Fuel X lite on my Hunter 350. Neither made a huge difference, alone or together, but together they feel like they make the bike more complete. Together, the mods make the bike pull a bit stronger, run a bit cooler, and the engine braking is a bit less severe. Definitely worth the investment.
@EvosRam4443 ай бұрын
Bro you should use K&N airfilter and and motul 300 V2 engine oil and iridium spark plug then I am 100% sure that you will see a huge difference in you pick up top speed and mileage 😇 thanx me later burahhh
@zensamui2409Ай бұрын
How much you spent total?
@boburrides6 ай бұрын
Just received my fuelX and going to install it tomorrow. For someone modding his first ever bike this video is INVALUABLE, thanks a million!
@Sm-iw2vh7 ай бұрын
Got my Hunter second hand from a Honda dealership in uk, took seat off to find tool kit but found a fuel x lite strapped in its place…. Straight to air filter and found the 2 stage DNA filter fitted. I should have checked before purchase really.
@Lee-70ish7 ай бұрын
Thanks for the post. Seriously thinking of fitting the lite to my 350 Classic. Seen one guys vid and he checked the cyilinder temps to prove if the lower running temp claims were true. After fitting the drop in temp was significant which suprised me.
@alexugurАй бұрын
I just installed the FuelX lite on my Hunter this afternoon. I would never have noticed that little cubbyhole under the tool tray and behind the centre spine, if you hadn't shown it so clearly in this video, so thank you ever so much. Once I knew where it was supposed to end up, it felt like playing a game of Tetrix, twisting the thing this way and that in order to position it: so hat's off to your ingenuity and perseverence. My Hunter's engine felt as if it never freed up after running in. It always felt somewhat hobbled or restrained. So the DNA stage two freed it up a little. And then a stainless steel decat exhaust system from Delkevic with a fairly open 9" (225mm) shorty end can freed it up a whole lot more. The S/S exhaust changed the bike's appearance in a big way, but I'm coming around to liking the new look. The bike's manners also improved, but the sound was somewhat raucous on heavy acceleration. Enter the FuelX. After a brief 25mile test run, I can say the bike runs beautifully. It now does everything I want of it. It can plod like a tractor and sound like a tractor when exploring leafy little single track roads with grass up the middle. But it can also hustle. Interestingly, when pushing the bike, the raucous edge has gone, instead sounding more refined and focussed in its bullishness. Only thing is that the bike wouldn't start if I didn't give 10 -15 seconds for the mapping to set itself up (this despite having let the bike tick over for well over fifteen mins to settle the ECU). As a result the engine management light came on (but self extinguishes after several starts with proper procedure). However, I have a feeling that the FuelX might have learning software that will in future allow immediate start up as soon as the fuel pump stops whirring. As it stands, I'm delighted with the fuelx. The bike is now everything I wanted it to be. PS, wishing you well and full recovery after your dreadful accident.
@Doesntmatter-xc8urАй бұрын
Hey what slip on did you run with that Delkevic ? I can’t find schematics so I don’t know the diameter.
@alexugurАй бұрын
PPS, the FuelX now works perfectly. The problem I had with starting the engine was due to the battery failing intermittently!!! on my 16 month old bike. Within days, the battery failed completely. With a brand new battery the bike starts immediately, with the Fuelx setting itself up in less time than it takes for the bike's fuel pump to prime.
@alejandropavan3366Ай бұрын
Did it improve your final speed?
@alexugurАй бұрын
@@alejandropavan3366 No, not in any significant way. This is because the ECU mapping and the gearing are still essentially the same. Freeing up the engine simply means it is happier to spin up and run at slightly higher revs. The engine no longer feels as if it is labouring. I specifically got the Hunter to explore the back roads - many single track - around my home in West Cork, Ireland. Being now able to have a bit of a blast down some of the more winding B roads is a welcome bonus. However, if I really want to go faster or travel longer distances on A roads, I still have my old 650 V-Strom for that.
@kartikshankar579010 ай бұрын
Hello and greetings from Karthik, India. How are you doing Sir? Hope you are recovering fast and hope your recuperating well. My prayers to the lord that you soon get well soon and start riding your motorbikes and post more videos. Miss you and take care Sir
@paulmears533010 ай бұрын
I put one of these on my Husqvarna Svartpilen 401, and it made a mild difference. That bike was almost bone stock intake and exhaust, but anything that corrects the extreme leanness of the factory mapping is a good thing 👍
@QuasiMotard10 ай бұрын
I wish that I would have had more opportunities to ride the Hunter with the FuelX, DNA intake, and Coffman's exhaust before it was totaled. The brief highway run I took felt like the engine had more power in the mid and upper RPM range, so I think the upgrades netted a few extra ponies. I'll try to get another Hunter 350 and revisit that project again next spring. Cheers! 😉👍 --QM
@anthonygreenwood276910 ай бұрын
@@QuasiMotard Very pleased to hear from you after your gettoff. Great that you’re planning to get another Hunter and bounce right back. Have enjoyed your videos very much, as you tweek this delightful and unpretentious bike. Good luck to you, here’s wishing you a speedy recovery.
@laurasawyer929810 ай бұрын
Good day Quasi. Hope you are on the mend and things are going good. Sending you prayers and big hugs! Love Ya Brother
@NO-WAR-WINGS10 ай бұрын
Get well soon as you can Brother
@FoxParasyte7 ай бұрын
My input (based off my own experiences and my videos on the subject) I have a Stage 2 DNA, Full exhaust and the Fuelx. It's made a massive difference to the bike in terms of how it runs. Smoother, can take highway speeds easily, basically it's a happy bike that doesn't really struggle (except acceleration but it's a 350 1cyl thats heavy) That being said a stock 350 is a 14-15 0-60 bike. Mine is at 12 seconds. Which i imagine a Hunter could be faster with these same mods due to the design of the bike being lighter and more aerodynamic. Also warning for anyone. If you make any performance mods... You will want the Fuelx before the exhaust. If not the spark plugs will foul extremely quick and damage will happen longterm.
@hunterrider34910 ай бұрын
AD Ben on the unofficial royal enfield Community forum has modified his bike and has also fitted the pro version and had the bike on the dyno and the results was it gave a small improvement in the lower rev range and nothing at the top end, it's was running very lean at the top end, so basically it's a waste of money 0:02
@brianrobertson6392 ай бұрын
Do you have the numbers for the settings. Cheers Brian
@AmfnD10 ай бұрын
Same place I fit mine. I slid it vertically along side the turn signal relay. It wedged in quite nicely and stays put, but it looked like you had some extra wiring in that space that i didnt on mine. I have some pics if you wanted to see how it went.
@QuasiMotard10 ай бұрын
Yessir... good eye! I had a bundle of extra wiring in there for the Denali T3 switchback LED tail lights ( www.revzilla.com/motorcycle/denali-t3-rear-switchback-led-turn-signal-pods?sku_id=10041373 ). That made my task even trickier... shoehorning everything in that cramped space was a trick! The LED position worked out well, though... at least I could see the status lights without removing the seat. Cheers! 😉👍 --QM
@AmfnD10 ай бұрын
That makes sense. If you want to keep your tool kit, that seemed to be the only.place to put anything. I was a little jealous when I saw the open side space on the classic as well. But all fit in the end, and the throttle is much more enjoyable and refined. Just need the exhaust swap next year.
@grominwithrob133910 ай бұрын
I hope all is going well. I look forward to you being back in the saddle and sharing your adventures with the interwebs again. 😂 I hope you dont have any long term injuries to deal with. 😢
@jake88ci10 ай бұрын
Smart .. I was going to recommend a fueller . Extens engine life and bike runs much better .
@Ilikedreamcore10 ай бұрын
Great video, might be a good one for Quasi raw uncut.😂 Hope you recovery is going well. Have you considered what you are going to replace the Hunter with
@samuelfitzsimmons89073 ай бұрын
Bro you sound just like Robert Downey jnr or tony stark. Anyway cheers for the video from Australia 👌
@billymc268110 ай бұрын
Did I miss something? I installed a Fuel X Lite as well on my '21 Himmy after installing an AEW muffler and DNA air snorkel. After 200+ miles, it stills pops on the decel. Not sure if the Fuel X is working properly.
@QuasiMotard10 ай бұрын
That's a good question! Some minimal popping (sometimes mislabeled as "backfiring") is normal due to emissions controls. The EGR and PAIR valves on many modern motorcycles will cause them to pop on decel just a bit, particularly when they are running on the cold-startup map. To properly test these gadgets, we would need to install a wideband O2 sensor in the exhaust and monitor the emissions both with and without the FuelX connected to see what's happening. Alternatively, we could use an OBD2/CANbus reader to monitor the engine parameters (e.g., perceived O2 readings at the ECU, injector duty cycle, ignition timing, etc). I was working with a telematics company in India that is developing a custom interface for Royal Enfield motorcycles. Our plan was to use their system (hardware interface and custom software) to gather long-term metrics on the Hunter 350. That would certainly give us some real-time data to monitor how the FuelX modifies the O2 readings headed into the factory ECU. Unfortunately, all of that is on hold now since my accident on Oct 18 that totaled the Hunter: kzbin.info/www/bejne/qKqofYCqesqfbsk . I'm hoping to purchase another identical bike in the near future so I can resume the project where I left off. Cheers, and wish me luck! 😉👍 --QM
@subhrajyotiroy2 ай бұрын
Hi. I have booked a Super Meteor 650 and yet to receive it. I came across this device on the internet and then found your video. I wanted to ask, does this increase fuel efficiency or does this increase the performance (read power or top speed) of the bike? I am not a fast rider, so my priority is fuel efficiency. I am wondering if this would help.
@SenaCaptures23 күн бұрын
Hi guys. Need your help. I got fuel x lite installed on my meteor along with BMC air filter. Since then I have been getting recurrent check engine light. Took the bike to the RE service center. They checked everything and told me that there was nothing wrong with the bike. They unplugged and replugged the fuel pump and the light was gone but it is back again. I suspect there is something wrong with my fuel x as the error code was system too lean. The bike runs absolutely fine though.
@GuyandLori8 ай бұрын
It looks like the Hunter gas cap is the same as my 350 Classic cap. I have had problems with my cap since it was new and it finally failed. The key was stuck, wouldn’t turn and the cap was open. I had to tear it apart just to get my key back. The dealership is currently looking into whether this is covered by the warranty. Have you noticed anything with your cap malfunctioning? Hope all is well with you.
@jonathantrujillo76354 ай бұрын
Hello friend, I have a fuelx lite just like yours, when I put the motorcycle on, the RED LED flashes like your video, but when I turn on the motorcycle the LEDs turn off. What I can do ? any advice?
@brianrobertson6392 ай бұрын
I haven’t found anyone that has also plugged in a Obd2 scanner, everyone just test rides. I want to see the short term fuel change with each setting. How about it.
@QuasiMotard2 ай бұрын
I planned to do a long series on economy and longevity for the Hunter. Unfortunately, I was only able to ride the bike for one day with the FuelX before it was totaled in a rear-end accident on the highway: kzbin.info/www/bejne/qKqofYCqesqfbsk . I bought it back from the insurance company in hopes of rebuilding it or perhaps parting it out: kzbin.info/www/bejne/ipawqqd7h82LeK8 . Cheers! 😉👍 --QM
@brianrobertson6392 ай бұрын
@@QuasiMotard I feel for you. The idiot could have run you over. I hope he wasn’t texting on his phone. Loosen the triple clamps and hold front wheel between knees, tweak it. Always easy after the event, put a set of crash bars on. You will be surprised once stripped down, don’t give up. Take care, get btr soon. An old guy (just under 80) Make every day special. Cheers Brian. Ps. Still unable to get data, even from manufacturers.
@BlueRidgeRider10 ай бұрын
I was wondering where it would fit on a Hunter.
@QuasiMotard10 ай бұрын
Yep, it was a tight fit to shoehorn it into the space under the tool shelf. The Hunter doesn't have any extra space anywhere that's hidden under the seat or behind the covers. 😉👍
@goatman382810 ай бұрын
Why doesn't the stock program adjust the fuel mix depending on the O2? Or does it, but just keeps it too lean? Is this typical across all brands? Obviously ime a noob here... 😂
@QuasiMotard10 ай бұрын
Great question! Most factory ECU's will adjust the fuel mixture up/down by about ~15% to compensate for temperature and altitude/barometric pressure changes. That's usually sufficient for most operating conditions, but these newer engines that have EURO-5 compliance are forced to run even leaner than ever before. The lean condition helps them to run more frugally and pollute less, but it also makes them run hotter (lean = HOT) and produce slightly less power throughout their operating range. The lean burn can cause low-RPM stumble and stumbling off idle, and the engine can feel "flat" at higher RPMs. Keep in mind that an ICE (internal combustion engine) is just a glorified air pump that's driven by a fuel charge in the air mixture instead of using an external power source. Whenever you add a performance intake or exhaust, the engine's airflow characteristics are changed... usually toward higher airflow. Feeding the air pump more air with the same fuel charge results in a leaner mixture (HOTTER combustion), and that can be detrimental to the engine. When you upgrade both the intake and the exhaust to perfornamce pieces, you can nearly guarantee that it will result in a lean condition. If the factory ECU can't compensate by adding enough fuel, then cylinder temperatures can rise too high. This can cause damage to valves, valve seats, piston crown, and piston rings... very quickly. The loss of power and heat stress at higher RPM's is usually subtle (not felt by the operator), but it can cause catestropic engine damage in mere seconds at full throttle or high-RPM operation. Cheers! 😉👍 --QM
@goatman382810 ай бұрын
@@QuasiMotard wow! What a thorough answer! Really appreciate it.
@blakecrosby51239 ай бұрын
Did u notice a reduction in engine temps. My hunter is getting hot on longer rides and is pinging a bit when going up hill. Stock bike
@QuasiMotard9 ай бұрын
Unfortunately, I only rode with the FuelX for about 30 miles before my Hunter was totaled: kzbin.info/www/bejne/qKqofYCqesqfbsk . The FuelX seemed to make the midrange smoother and more responsive during my freeway ride, and it pulled noticeably harder in the upper rev range. I'm planning to get another Hunter 350 next spring and resume my project. I will reinstall the FuelX on that bike and hopefully have more time with it to make an informed opinion. Cheers! 😉👍 --QM
@blakecrosby51239 ай бұрын
Yea I'm sorry. New to chan. Saw after my comment what happened to u. Felt like an idiot lol. Hope your doing well. On a side note how the heck did u get the hunter to 80 mph. I'm having trouble hitting 70. Any way good luck in future.
@QuasiMotard9 ай бұрын
@@blakecrosby5123 My Hunter 350 loosened up after about 750-1000 miles, and it seemed to be easier to maintain 65-70 mph without straining. Climbing above 75 mph took a while, so that was definitely reaching the bike's upper limits. The FuelX seemed to give better mid to top-end power, so I would have liked to do a few top speed runs with it. Maybe I'll have that opportunity with the next Hunter 350 that I'm hoping to purchase next spring. Cheers! 😉👍 --QM
@blakecrosby51239 ай бұрын
Yea I can hit 75 indicated but never 85. Course I'm a 250lb rider. Any way good luck and check out that new triumph speed 400. Looks as good as our hunters but twice the hp. Looks like a solid bike.
@EdgeMasterPro5 ай бұрын
@@blakecrosby5123I took the triumph speed 400 for a test ride and hated it much more power yes but first gear is way way too short (I assume for new riders and scrambler version) but power is all up in the higher revers not much better pull and running via a 6 speed gear box too sports bike to me and the headlight is butt ugly
@7thsignthenorthcoast14610 ай бұрын
If and when their insurance pays out as they should . Are you going to get the same bike again ? Or do you have something else in mind already
@QuasiMotard10 ай бұрын
I'm planning to get another identical Hunter 350 in Dapper Grey. I'll reinstall the same accessories and upgrades, then try to resume where I left off. 😉👍 --QM
@expixtersbetheboss9620Ай бұрын
Is the hunter repaired or sold by parts ?
@QuasiMotardАй бұрын
@expixtersbetheboss9620 My Hunter 350 is sitting in my warehouse, waiting to be repaired or parted out. I plan to repair it if the frame isn't severely damaged. If the frame is twisted, then I will sell the parts to recover lost money. Cheers! 😉👍 --QM
@k3deuce7 ай бұрын
Can this bring hunter 350 faster? (more than the top speed 120 kmph) How about the performance after you install this?
@QuasiMotard7 ай бұрын
The FuelX alone probably won't raise the Hunter's top speed. However, engine output can be increased with the combination of the FuelX, a performance intake, and performance exhaust. Note that the Hunter has a speed limiter in some markets (e.g., UK/EU) but the USA model doesn't appear to have any speed limiter: kzbin.info/www/bejne/fKbWfmqao5p5faM . Cheers! 😉👍 --QM
@k3deuce6 ай бұрын
thanks for the information!@@QuasiMotard
@YooperDanKulka7 ай бұрын
What's wrong with you putting the tools in a bag mounted on the front forks?😮
@QuasiMotard7 ай бұрын
The tools would be more exposed to the elements (e.g., rain, road debris), and more likely to be stolen while the motorcycle is parked in public. --QM
@mr.somebody149310 ай бұрын
😃😃😃😃
@JamesW-yb5wq6 ай бұрын
How tall are you
@QuasiMotard6 ай бұрын
I'm about 5'6" (168 cm) tall with a 29" (74cm) inseam, and my riding weight is ~165 pounds (75 kg). Cheers! 😉👍 --QM
@richard295196010 ай бұрын
i see you got a oil temperature gauge as your oil filler cap , can you tell me where you got it from please ?
@QuasiMotard10 ай бұрын
That is the JMP oil temp gauge from Hitchcocks Motorcycles in the UK. It's available in two colors: Black: accessories.hitchcocksmotorcycles.com/48470 White: accessories.hitchcocksmotorcycles.com/45253 Cheers! 😉👍 --QM
@subhrajyotiroy2 ай бұрын
Hi. I have booked a Super Meteor 650 and yet to receive it. I came across this device on the internet and then found your video. I wanted to ask, does this increase fuel efficiency or does this increase the performance (read power or top speed) of the bike? I am not a fast rider, so my priority is fuel efficiency. I am wondering if this would help.
@QuasiMotard2 ай бұрын
Unfortunately, I was only able to ride my Hunter for about 30 miles before it was totaled in a road rage incident ( kzbin.info/www/bejne/qKqofYCqesqfbsk , kzbin.info/www/bejne/ipawqqd7h82LeK8 ). During that last ride, the engine definitely had a bit more power and the bike was able to accelerate past 70 mph easier than before the upgrades. Note that I had a DNA Stage-2 intake, a Coffman's Shorty Exhaust ( kzbin.info/www/bejne/eYvPf4mBeZimfqs ), and the FuelX Lite... so the performance increase was a combination of all 3 items. Cheers! 😉👍