Questions answered about using SATA HVLP or RP

Key things all painters should know about HVLP vs RP

[@gregaskew2554]

Thanks, Tony. Great info & great guns!

[@whipzpaintlyfewithjay9654]

Excellent info…very informative!! I have SATA 5500x 1.4 O and I definitely love it…atomization is great along with transfer efficiency. I ended up getting this particular setup after looking at a KZbin video review that you, and Jon Kosmoski and another did. It was initially a dedicated base gun, but after looking at the video again I heard you all say that it sprayed clear coat pretty well. So when I finally decided to do a clearcoat application with I can definitely say I WAS NOT DISAPPOINTED!!! Thanks much for the very informative vids… I’m still considering investment in the RP because I figured that the RP was better for clear after hearing so many people say. If the HVLP sprays this well I imagine that RP would be even better!

[@BlackwaterFather]

I use my 1500RP for sealer, 5000RP for solid basecoat, 5000HVLP for metallic basecoat, and 5000RP Phaser for clear coat. All 1.3's and love them. Still got my old Sata Jet's though!

[@jamesmarques7245]

Looking to upgrade my sata jet 95, it sprays pretty good. The fan if I open it all the way it does not spray well,it needs to be opened 3/4.

[@jejoko]

So frustrating. 90% of this video is about HVLP insted of an actual side by side explanation of HVLP and RP. RP was literally mentioned only twice in this video.... 😮‍💨

[@vonovine]

After alot of agonising just bought a x5500 rp 1.2i hope it delivers for clearcoat over my 3000rp 1.3.🤔

[@gilangcustommodify785]

Nice😍,, from Indonesia 🤩

[@ColeAviation]

How can I go about getting a 1.4i tip and nettle set up for my 5500xjet? Thanks!

[@jeremyoetken2094]

For the 5000rp what is the difference between the 1.3 and the 1.3 cc

[@jetski0370]

Do you have information on the Sata 4600 guns

[@joeytravis1953]

What is the fan size on the 5000 rp in inches I'm trying to figure out what my exact overlap should be

[@joeytravis1953]

If the fan pattern measures 12 inches from tip to tip at 6 inch distance then my 75 percent overlap should be 3 inches or am I missing something sorry I'm trying to perfect my overlap on my paint jobs

[@radudanielman]

👍👍👍

[@sergiofernandez6163]

Hola... para cuando lo traducen al español...SATA debe tener presente a todos .... KZbin también debería poder traducir los comentarios que están en inglés... GRACIAS!!!!

[@tylerc7545]

I always used HVLP for base and RP for clear until I accidentally put base in my Rp. I sprayed it and loved it only been using an RP since

[@gershonjoseph6194]

Does the rp spray the base as good as the hvlp?

[@eddielugo8143]

Do rp wet more than hvlp? Do the rp spray more material than hvlp?

[@Panzehir1881]

I have Satajet 5000 1.2 mm RP, I would like to buy Satajet HVLP for base coat,,, or can I just buy a HVLP nozzle set and use it on my RP? Are spray gun nozzles interchangeable? I found various information on the internet

[@ddkhan1595]

I want to know about price plz

[@ryanmodernelementinc.1246]

Thanks for the great info! I want to get the Sata 5500 for applying solvent/alcohol based spray stains for cabinetry, which requires low pressure atomization, so that the product can get into the small sharp interior corners without blowing back out. Would you recommend an HVLP or RP? Which gun will atomization best, if the air pressure at the air cap is 7 psi on both guns?

[@armychris9148]

I got a question I was sold a used sata 5000b hvlp gun with a 1.3 RP tip and needle I haven’t gotten the chance to use it yet the guy that sold it to me swore it worked amazing is this even right ? Is it now a RP or a hvlp still or a hybrid ? What changes exactly

[@glen4407]

The air cap center hole clearance to the fluid nozzle is the main difference between hvlp and rp. I would think yours will be very close to hvlp. I only have rp's, can't check to see nozzle difference.

[@user-rq4mw8ip1h]

sata 3000rp is the best for clear and 4000 for base and single stage

[@Gordonjosh1212]

RP IS THE ONLY WAY TO GO. NOT SURE WHAT I'LL DO WITH THE HVLP GUNS I'VE BOUGHT.

[@eviljoker303]

I’ve noticed how much my 5500 RP just seems to use up so much material and there is a lot of overspray. How can I resolve this ?I still don’t understand how HVLP is different from RP or HTE

[@xristosziras8722]

Rp clearcoat 2k base primer wet on wet hvlp only waterbase.. Sata jet 5500x the best gun!!!! The best nozzle for me 1.2 I🔝🔝🔝🔝🇬🇷🇬🇷

[@AChampagneWeezy]

Same over here , I use a dv1 for the sealer though using a 1.2 , a lot less overspray then the sata but I also spray it at 17 psi . Spraying ultra 9k as of now

[@mitchellferre1652]

Rp for me

[@ahmetcam5656]

İ think buy sata x 5500 1.3ı nozlee rp Technology but can i do metallic base coat with rp ?

[@Tyler.56]

What are you spraying? You can use rp for base for example I spray water spies hecker hi tech and they recommend sata rp 1.2 for base. I have the 5500 rp1.2 i and 1.2o I also have the 5500 rp1.3i which i have found is the best for clear. But that doesn’t mean u can’t use it for base. Check your tds sheet for what paint your using and worst case you can always close the fluid adjustment so it doesn’t put out as much material

[@ahmetcam5656]

@@Tyler.56 Thank you, I painted a base coat with a rp gun before. It leaves a bit of residue. It darkens. I had to sand in some parts. Now I bought a 5500 1.3I hvlp. Now I have a hvlp and a rp.