Quick & Easy 2023 Toyota GR Corolla Build - Finale

Valvoline Motor Oil: www.valvolineglobal.com/
MBRP Cat-Back Exhaust: www.mbrp.com/
Continental ExtremeContactForce 245/40R18: bit.ly/3YwVD1v
Annex ClubSpecPro Coilovers: annexsuspension.com/
APEX VS-5RS Wheels 18x9.5 +29 : apexwheels.com/
NEW MERCH!!: importbible.com/shop/speed-ac...
#SpeedAcademyContinental
Join Our KZbin Community: goo.gl/n4m3Ez
Our Patreon page: / speedacademy
BUY Merch Here: www.speedacademy.shop/
Favorites:
Continental Tire ExtremeContactSport 02: bit.ly/3I4ejyC
Learn how to Tune Vehicles: bit.ly/3toS5iy HP ACADEMY $50 OFF DISCOUNT CODE: SPEED50
$125 OFF ANNEX SUSPENSION use code: 'SPEEDACADEMY' annexsuspension.com/
Swivel LED Light: amzn.to/3kN85Z0
LED Bay Shop Light: amzn.to/2HHBw9D
AirLift Coolant Fill Tool: amzn.to/3FmJlPg
MOTIVE Fluid Transfer Pump: amzn.to/3Fq7lAY
Uvex Face Shield: amzn.to/2jgZttO
Astro Rivnut Tool: amzn.to/2HAZN51
Rivnuts: amzn.to/2Fse0v8
DISCLAIMER:
Speed Academy videos are solely for entertainment purposes. Never perform any modifications to your vehicle that will void your warranty or in any way violate your local road going laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

[@FaithlessEmoRacing]

Top Tip from a GR Yaris owner. If you put the car in expert mode (Hold the traction button down) it will remove the soft limiter when stationary allowing more revs!

[@bandwagon240]

That exhaust is a huge improvement, especially in the looks department. What a nice kit.

[@robh3043]

MBRP needs to offer a gloss black option for the blanking plates

[@ninopanino10]

Thought the exact same thing

[@F0BBYLEE]

That's an amazing exhaust design.. love the delete covers. Well thought of 10/10.

[@FATmenDRIVEtrucks]

Gotta love mbrp cheapest option in most cases too

[@yuyu-san]

Too bad center exit exhaust is actually worse in terms of the specific issue with the rear clutch pack overheating. Side exit is actually better.

[@supercliff4994]

The GR Corolla is living up to the hype and I love seeing Toyota back in the performance car realm. Completely unrelated, I would like to see a modern Evo vs STi shootout on here. An Evo X and an equivalent year/model STi. I know the Evo vs STi horse has been beaten to death, but it never gets old and your builds are always supreme. Keep up the great content!

[@christopherbassit2757]

I’ve had mine for 10 months now and absolutely love it

[@cardiacdrummer5443]

I bet it’s always a breath of fresh sure for you guys to work on a rust-free car. Tastefully modded and great video as always guys.

[@robpetersen87]

Got a season of autocross in with my GRC Core w/Performance, and it's been a great car so far. Alignment and tires are all I've done to it, and it rips.

[@lauriedooker1031]

I’m. a Australian gr4 Yaris owner. They are way better at smiles than any other for mine. It’s so interesting to see what you Americans are doing with these sole full cars.

[@ricepony33]

Dave’s comedy moments are the best, lean into it!

[@VS666]

that new exhaust sounds incredible on track. i am always surprised at how good MBRP exhausts sound, they're priced very well. car looks super capable and composed on track, what a ripper!

[@Henry_992.]

Those wheels really suit the car. You guys need to do a build on the new Tacoma when it comes out.

[@petebrons8513]

Totally agree on the stock exhaust. That new unit looks the way it should have come from the factory.

[@zerokool-2058]

Thats how I like it. I don't having my car too loud. The sounds is just right for me.

[@Pallidus_Rider]

Disconnect the battery, install intake. Reconnect battery. The computer will be in learning mode and adjust air to fuel properly. I had to do that with my Corolla using AEM intake

[@khaki_man]

The stance/wheel/tire setup is perfect.

[@bgee461]

This car gives me 88 323 gtx vibes, and i like it 👌

[@VPoje]

Great video as always guys! If you could in the futur test the endurance, like a 20min lapping session, because many reported overheating problems. Thx!

[@JFlogerzi]

Its a known issue. The rear diff overheats and the engine oil gets pretty hot considering they are using 0W-20. This is more of a canyon/DD than track weapon. Still glad to see Toyota getting back in the game.

[@Dibbs10101]

Good to see the GR finally on the track. I know Toyota put some of their best tech in the car but I was puzzled by some new fangled oil metering device Dave used before driving. Do you think Toyota will let BMW have this tech as part of their collaboration with the Supra?

[@ConiferConnoisseur]

Always look forward to uploads on Saturdays! Awesome content!

[@ninopanino10]

That exhaust looks amazing

[@RealBearFace]

Great job guys. Digging the new look. It kind of looks like an optional performance pack and i think its dope asf

[@Dcdc956]

That exhaust set up is 🔥

[@jackweta]

Always a treat seeing you track your cars

[@sergiopereira9546]

everyhting you did to this car was a massive win , good stuff

[@colinmcdonell5034]

Beautiful car. Love the MBRP exhaust. You should add a upgraded performance intercooler to keep the intake Temps down.

[@KeanF84]

Siick. I love this car. Coming from a Honda nerd that bought a 2010 4runner, my love for Toyota has only been growing.

[@mayk3lll]

I was disagreeing with you until I saw the new exhaust installed. Definitely the right look ! 👌

[@deciplesteve]

100% agree on the look of the exhaust.

[@koo08]

what about the rear diff overheating?

[@iangeorge6409]

Or the clutch to the diff?

[@robpetersen87]

Not gonna crop up on a chilly Canadian day on an 8/10 run. More of an issue going balls out on warmer days.

[@arturo762]

You guys saw that video too huh

[@robpetersen87]

@@arturo762 I don't know about a video, but I have a GR Corolla and it's a known issue with heavy track use.

[@anthonykiedis1765]

Good thing most of you will never drive your car hard enough for it to matter.

[@ClassicRed2159]

Such a unique sound. Starting to dig the GR rollas

[@dncInfamous]

I had a 2020 STI which ended in a total loss unfortunately. Really loving what Toyota is doing with the GR division and might hop on a 2024 GR Corolla once the dealerships start getting them in.

[@stevenlautner6329]

They have them, I’ve had mine 2024 core PP for almost a month. Do it !!! The car really is amazing.

[@samsung40_media87]

I must say, this car looks good 👍

[@cesarefredducci4815]

Perfect upgrades, the car looks and sounds amazing. The only extra thing I would have done is to wrap the block-off plates for the side exhaist tips in gloss black to make it blend perfectly with the rear diffuser, still, such an upgrade over the stock exhaust.

[@pahaf1991]

Love you guys. Keep up the great work. You are literally the best channel I watch. I look forward to you guys over Adam Lz…jimmy oaks….gears and gasoline. They are great, but you guys just top them.

[@jacoblacroix9024]

Car looks awesome and sounds killer ! Good job on video! Hope you add a couple more mods to it

[@viranjith]

Love watching these

[@amoni1959]

Wow! Great job on the car guys. 👍🏾. Loving that new exhaust. I could barely hear the old one. Has to turn the volume up. 😂

[@dadhats]

wow that center exit exhaust looks phenomenal. wasn't expecting to like it so much!

[@afryhover]

GR corolla = SICK!

[@pFbSpecV]

What a awesome car!! I’d really like to get one of these! The exhaust sounds amazing also in my opinion!

[@tr4ck_day]

I have those same exact wheels in the same exact color on my ZD8. Great pick boys!

[@TougeSolo]

Got my ITR shirt featured in this video the other day. Wearing it now :D As for this Corolla GR. Yeah, fantastic cars. But the same can be said about the base Corolla hatchback now. The TNGA-C suspension is crazy solid. There's a monster hiding in that chassis, and I always thought it was a better 86 than the GT/GR/FRS/BRZ 86. The real problem with the non-GR Corolla is the lack of low end torque. But once you open up the airbox with a TRD box, and get rid of the massive downstep in the exhaust right before the axle back flange, the M20A really does come to life after about 4500RPM and loves the high rev range. I did RS*R coilovers, sticky Falken RT's on a 17" RPF1, progress rear sway bar, previous gen corolla front endlinks (slightly shorter), TRD air box, and a Toms Racing front chassis brace. Pure backroading bliss and still capable of 40mpg under normal driving. I think the really only weak point in these cars are the manual trans. Don't think Toyota expected people to beat on these cars too hard. lol But I am sure the GR trans is MUCH better than a base trans.

[@adilmehmood1199s]

When I heard the plan for the exhaust, I was like its a mistake, but when I saw the results I was shocked. It looks 10 times better now

[@jacquesc3166]

Tilt of this hat on the wheels guys. Style & fitment, top notch.

[@aroundomaha]

So glad to see you guys get this rare and awesome hot hatch. The GRC would be better daily than my BRZ for Seattle commuting, so this gave me a smidgeon of buyer’s remorse.

[@C-Lint]

Awesome hot hatch!

[@geoffreyadams6236]

It has a dipstick! Already winning.

[@BeardedCarBuddy]

Did I ever tell you how much I love your shop?

[@jegglz3845]

the hype is real! mine is supposed to come on the 12th!

[@LanceEJones]

Congrats! I’m a few weeks after you. Happy holidays!

[@blackGRC]

The gloss PPF makes this, the hands down, the best color. Loving the oem+ mods. What are your alignment settings? How were the engine oil temp? Oil temp sensor could be sitting in the oil pan so maybe thats why theyre so high even when its cool out and water never tops 210F

[@uncleshrek32]

Now that is an exhaust for that car!

[@jdmnuggets]

So glad to hear a modern car can feel analog and soulful i had lost hope in modern vehicles. Amazing video as always, should have had a pedal box cam so we could see daves clutch foot having a spaz trying not to rev match

[@FranzGaw]

It rotates even better on Track mode

[@jdmfreak22]

That exhaust looks SO much better than the weird OEM one. Good one.

[@kenkozawa9810]

I have a 2023 GRC, I think it is fking awesome 😊 great vid guys as always!!

[@JG-mg3if]

Love looking at mine. When I first saw at the dealership I was in awe. Short , small and stocky 🏋️‍♀️. I’m more use to it now as I look at every day 😅

[@popdatclutch3010]

I can genuinely say the gr corolla is one of the only cars id be ok with leaving stock

[@DavieDrum98]

I have a 2024 Premium, and man I want those Conti ExtremeContact Forces, but they dont come in the stock 235's

[@hardy.gleissner]

The GRY/GRC is the best "stock" car I've ever owned (comparing to Focus RS, Evo X, Evo 8 & 200SX S15). Evo's are still best when it comes to modification though, by far!

[@weiyang88]

He's driving a Morizo, most of us won't ever get to drive. Morizo has suspension upgrades and better tires.

[@paulstack2431]

Great video, and love the track test 👌 Now, I'd hope and expect the track focused edition of the GR Corolla especially after even more track focused suspension ' wheels and tyres are fitted to out perform a stock fk8 . Alll up that car with mods would be double the price of what I paid for a new fk8 in Australia' S50'500 vs around $100k in Australia so I'd definitely expect that kind of improvement no doubt about it.

[@carlosbonilla1637]

And the M3 is still on jackstands 😂👍

[@Randy8309]

His Valvoline sweater is bad ass

[@a6thomas574]

You should do a battle with this and the evo 6 old school wrc vs newschool wrc

[@tylerdowd]

god that new exhaust looks 10000x better

[@mentals555]

I wish we got the Yaris version. They had them in Germany when I was stationed there. I wish I could have test driven one but they were not common during the pandemic

[@garnetheron4885]

I think the stock exhaust is beautiful

[@A.R.C.77]

If we made an exhaust like that people would laugh from factory it's cool 😅

[@GBKICKS1]

factory intakes are always the best😂😂 we can’t question engineers

[@MTalib87]

I literally 👌 at the monitor when I seen how good the single exit exhaust looked lol

[@jp2246]

For those that watched the BMW build series...the oil top off using the syringe made me chuckle!

[@cmbp435]

sounds like a mitsubishi 3000gt. I love the 6g72

[@usergrade7812]

Not every aftermarket intake throws the CEL. I have the Forge unit coming for my Circuit which just replaces the upper of the box and you can get a larger snorkel.

[@JG-mg3if]

Did you receive the Forge unit yet? Please let me know how it’s working for you. Interested in maybe getting one but want to know about any CEL issues. It’s saying no CEL issue online.

[@usergrade7812]

@@JG-mg3if It's a Christmas present, so I'll get it Monday. The Forge unit only replaces the upper box and intake pipe though which gives a higher flow filter and less turbulent intake air flow. Not messing with anything in the lower box will keep the CEL issues and that's why the Forge option doesn't cause them.

[@JG-mg3if]

@@usergrade7812 Thanks, if it’s not to much trouble keep us posted. I’m interested in adding the forge intake. Also trying to find info in regards to the forge turbo inlets.

[@sickjohnson]

Waiting for the intake and track laps across america!

[@spinnetti]

Nice exhaust choice.. that would be my pick too - would be good to include weight savings with that kind of thing given little to no HP improvment. Wheels look great too, though I suspect RFP1 would be lighter (I'd go 17" too for the mass reduction). Surprised you went with stock tire size on such wide wheels. I'd have increased the fronts at least to 265 maybe.

[@streamius]

SXTH has a larger PCV hose coming out for the intake issue, it won't be long.

[@JG-mg3if]

I agree on the look of the exhaust, I like the middle but the side ones are a little small for my taste. Probably still keep mine stock as u like it more than dislike. But if I was tjj in change it it would be for the Apexi N1 .

[@drivingpsyche]

Single exit exhaust is a mean-looking addition. My only issue with it (and also mine on 86) - the cavity created behind the bumper (under the trunk floor) is massive and acts like a catch for all debris on the road. I had an incident I drove over a dead possum, and it caught on the edge of the rear bumper almost ripping it off. Maybe try to come up with a thin, aluminum plate connecting the bottom edge of the bumper with the subframe?

[@emericareaper2]

Crazy how much it sounds like a Suzuki Cappuccino. This is SO CLOSE to how mine sounded with a full exhaust! 3 cylinder turbo power

[@jeremyb4493]

Cappuccino is one of the project cars being featured on gears and gasoline

[@entropy11]

Gaaah I love small cars and my next car is really down to one of these, a '22 Veloster N, a 24 BRZ/GR86, or a 24 ND4 Miata

[@lancefitzhenry5410]

Have you guys thought of adding OBD2 info/telemetry to your track videos? It make take a bit more work to overlay the info (RPM, Speed, boost, TPS, coolant/oil temps, braking, ABS engagement, etc), but I tend to be way more engaged in track videos when I can see more detail of what's going on compared to commentary only.

[@patrick.drives8730]

stick a roll bar in the rear, and the build is done!

[@ImEnhalos]

the 3 tip is way cool

[@PaoloRicci-sj1ci]

Great lap! Love the set-up you guys have. Inspired me to install the MBRP exhaust on my GR Corolla Circuit Edition....what tire pressure where you guys running at TMP??

[@garnetheron4885]

I like where are you going with this? What are you replacing? The stock exhaust with? Also looks good.

[@batasrki]

I would've loved to see a before-and-after comparison. How is this car truly stock versus how the mild improvements helped. Other than that, good job!

[@dadhats]

pt might not want you to hammer out a fast lap but I sure want to see that!! :D

[@Beezy_Builds]

Id love to see a similarly set up dct elantra N against this

[@TheFlame9988]

I'm surprised you guys didn't throw some heat wrap around the exhaust when switching it out, many people have reported overheated rear clutch packs at the track

[@marc9283]

What do other modern hot hatches run on that track?

[@LifeSOSlive]

Did you have to put an adjustable rear control arm on with those coil overs to get alignment into desired spec?

[@The_Stick]

I love this build. Maybe I missed it, but did you modify anything in the braking system?

[@AdamAllen]

MUCH better exhaust!

[@williemandowa]

That exhaust is so badass🦾🦾🖤🖤🔥🔥😈😈!’nn

[@Elver_Galarga_jugo]

Most likely than not, the CEL from an aftermarket intake is an emissions code. The new mustang GT does the same thing, when you remove the carbon traps, the car sees a slight HP bump but you get a CEL even if there are no intake leaks shown by STFT and LTFT being spot on. All it is, is the ECU looks for a certain amount of airflow for a given throttle input and if it sees more than what it should see, the ECU throws a CEL because it thinks/knows you removed the carbon traps. Ford does it in a real sneaky way btw, the gen4 coyote in the mustang if I'm not mistaken, adjusts fueling via a MAP sensor now, and yet you see two throttle bodies dumping into a single plenum (that's suspicious and not at all for performance), then you see one intake tube per TB and a MAF sensor on each intake. Again, a MAP based engine with MAF sensors. Why use a redundant way of fueling a car like that if it wasn't to "snitch" that you changed the airflow in to he engine. It's a real shame that we can't even change an intake on these newer cars for power. Now, we're going to be changing intakes for looks and not in hopes of power.

[@tannerhoward5974]

Should have done a before and after track video to see what mods improved anything or a waste. I'm willing to bet there wouldn't be any lap time improvement mod vs stock. The wrap looks great and takes the headache out of maintaining the matte paint.

[@dbeckMSP]

Is the CEL also on the aftermarket intake piece that connects the lower flap on the box to actual cold air? Savage geese mentioned they had this piece on their car to mitigate intake air temps

[@ricardofernandes7303]

Have to say that I didn’t liked the wheels choice and the exhaust tips so outside the bumper line. For the wheels I would go the JDM route!

[@starkyslp16]

That exhaust is a huge visual upgrade. I really dislike the stock exhaust look on these. I would spray the side exit blockoff plates gloss black so they match the diffuser. Maybe also push the tips in a little more if you can too.

[@chads7796]

Yes!!!! Tips need to be a bit more flush and are out too far.

[@antonberest8384]

Great video!!! Love the track content, but I know the views are really struggling😢😢

[@e36s54]

What does the FL5 run at your track? That would be the comparison.