CLEVER ... very clever. Nicely done. Greetings from Ontario, Canada.
@GMerc-ss6hy10 күн бұрын
Sweet set up.😊
@bradgulczewski95512 жыл бұрын
Amazing job! I have been using plastic pvc pipe on the blade of my ATV snowplow, love it and works amazingly on a gravel driveway, but the pvc pipe gets bridle and breaks with the cold so easy, I’ve gone through 3pipes already and it’s only February! I definitely have to start on this!
@rickfeaker5911 Жыл бұрын
Try a piece of 2 inch water pipe or plastic gas main pipe
@kickford9 ай бұрын
I live on a private road and my plow always tears it up until the ground freezes. And with our crazy weather patterns it doesn't freeze up most seasons. I thought about using the shoe holes to hold it in the slot similar to how you have it. Then I could just unpin the shoe links and store it on another set of hole brackets on top. Great system you have by the way! Thanks for sharing
@mattelkins90039 ай бұрын
thanks for sharing. Simple and effective!
@jaredallen11498 ай бұрын
Genius. Well done!
@stubby1122Ай бұрын
Sweet!
@Twoholesofman9 ай бұрын
Im doing this right now. Thanks for the video, made my life easier
@croquest87492 жыл бұрын
Old timer l like your style.
@roadglide11428 ай бұрын
If you’d market that system you’d make millions!
@kingtut5923 Жыл бұрын
Very smooth idea i welded mine on
@stevehutchinson238 Жыл бұрын
I’m so making one of these! Genius!
@parneypots9 ай бұрын
Ingenious
@theroofsedge4 ай бұрын
Nice job. What size pipe? Nevermind, 2" as stated below.
@gordbaker8968 ай бұрын
Very Well Done Sir! Did you cut the slot with a Grinder? A torch would have likely distorted the Pipe. Sched 40 2"?
@TR1CKSHOTS3111 ай бұрын
That looks awesome but you didn’t show the other side. What does the the hook think hold on too? Driver side you got the pin that slides in then you attach the safety pin . But the other side you welded something to the blade to keep the hook thing attached while plowing?
@Springdalecottage9 ай бұрын
I removed the carriage bolt and replaced it with a hex head bolt and I welded a nut to the top of the bolt.
@ernieowens7428 ай бұрын
Cool deal
@blueglide1 Жыл бұрын
Ingenious!!
@toddtrautman773410 ай бұрын
I cringed every time you threw the pin on the hood. 🙂
@Carmelo-u2q9 ай бұрын
😂😂😂😂 💯
@wdrdiyman16742 жыл бұрын
Looks pretty neat !! Am going to try it on my 8-foot plow. Didn't see any detail on the mount at the bottom of the blade on the left side...facing the plow. Or did I miss it ?? Wall thickness of the 2-inch pipe ? Creative solution !!
@Springdalecottage2 жыл бұрын
I removed the carriage bolt, replaced it with a regular hex head bolt and welded an extra nut to the head of the bolt for extra depth. Then I welded a plate to the pipe with a slot that slides over the bolt head. Thanks for watching!
@dginta79322 жыл бұрын
Wow. Nice.
@D2500R2 жыл бұрын
Do you have a video of how well this works while plowing? Like to see it in action. Thinking about doing this to my front tractor snow plow.
@Springdalecottage2 жыл бұрын
We don’t have a video, sorry. But when we get some snow we can definitely do that! Thanks for watching!
@D2500R2 жыл бұрын
@@Springdalecottage I literally just cut a slot and welded a 2" pipe on the bottom of my plow yesterday.
@Terk1312 жыл бұрын
I have the pipe behind the blade and mount it with 2 tabs where the shoes go this way its on and off. Been doing this for 25 years.
@D2500R2 жыл бұрын
@@Terk131 so it does well though? Some people say it will leave too much snow. I wish now I had done what you did. That was a great idea.
@Terk1312 жыл бұрын
@@D2500R it cleans awesome, back blades awesome, no complaints at all AND it saves the gravel and grass areas. Guys that put it on the blade have some problems but I used 3" pipe and mount it where the feet would go and keep the actual cutting edge ¼ - ½ off the ground. Wish I could send you a pic.
@bryanwanek46 Жыл бұрын
You sir, are an absolute genius! I have a Hiniker V-plow and a gravel driveway. Does this prevent pushing your gravel into the yard?
@Springdalecottage Жыл бұрын
Thank you! Yes, this makes a smooth plow.
@bryanwanek46 Жыл бұрын
Thanks for the reply. Going to try this on my Hiniker. Tired of having to power broom half the driveway out of the yard in the spring. Love your quick on and off single pin design.
@michaelbierlein564210 ай бұрын
Slick
@dginta79322 жыл бұрын
Nice job. Did you use an angle grinder to slice the pipe?
@Springdalecottage2 жыл бұрын
Thanks! No I used a cut off saw but an angle grinder would work.
@michaelchaoticreason50592 жыл бұрын
What size pipe did you use? 2”? Schedule 40?
@Springdalecottage2 жыл бұрын
Yes 2”
@craig4926 Жыл бұрын
looks like schd 10
@Lasersgoespewpew10 ай бұрын
What fid u use to cut the line across
@Springdalecottage9 ай бұрын
It’s a gas powered concrete cut off saw with a fiber blade for cutting steel.
@Springdalecottage9 ай бұрын
You can use an angle grinder with a fiber wheel.
@ericjohnson5665Ай бұрын
What size pipe
@SpringdalecottageАй бұрын
2”
@martymartin7146 Жыл бұрын
What size pipe is it?
@Springdalecottage Жыл бұрын
Hi, it’s 2”. I apologize, I didn’t see this comment until now.
@johnwasmuth908Ай бұрын
I think you would end up with to much Mat at the end of winter
@cryptoglenn2 жыл бұрын
Id be concerned with the bite not being as good.
@Springdalecottage2 жыл бұрын
It scrapes down well. I only use it until the ground freezes. Thanks for watching!