Quick! Modify an STL file - Fusion 360 Tutorial -

Live Stream - Confused? Frustrated? Not on my watch :-)...Check out a couple cool tricks to modify an STL fil. This is Fusion 360 AND we will chat about your comments and questions.
Style: Casual
Time: About 15-30 minutes (We all have other things to do :-)
Check out Thingiverse:
www.thingiverse.com/
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
bit.ly/2c2ivku
SUBSCRIBE!
kzbin.info_wid...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY BLOG, cadcamstuff.com:
cadcamstuff.com/

[@egonsvensson2728]

Hi Lars! To get rid of triangles on plain faces I usually just choose one of them and hit delete (And If that doesn't fix it, I'll delete another triangle, until it becames one face) . Fusion repairs it to one face without triangles in 95% of the cases :) Keep up the good work!

[@NeilvanderMerwe]

thanks .. works like a charm!

[@eric8737]

Once again, another great video. I'm learning fusion 360 to model my own stuff to 3d print. I'm going through a few of your videos a week. Really appreciate your efforts.

[@davidcross30]

Just found you @lars and I have been binging hard on your vids. Great content my man. Thanks a bunch.

[@ronsites2694]

Thank you for this video! I have been struggling with resizing some holes in an STL file and I think you have just solved my problem. I can't understand why someone would complain about your videos. You have taken your time and experience to help others, if they don't like it then go away or make your own videos.

[@ThrottleStopGarage]

Life saver Lars! Thanks so much. Your videos are always CRYSTAL clear. I had this exact problem and your solution saved me about a day!

[@LillySchwartz]

Thank you for this video, it definitely helped me to get started! Successfully modified a bunch of STLs like this that printed perfectly afterwards.

[@side54723]

start at 3:00

[@GaryParkin]

Thank you for your videos, Lars. This was pretty cool. As a beginner to this software I'm excited to see what it can do.

[@mark675]

This is a great channel and such a big help for me being new to fusion 360, thanks for the detailed videos :)

[@marcaldo]

Excellent video! Very practical and straight to the point. Thank you!

[@justinfielding]

Well, this is not that easy or ‘quick’ but I really appreciate the video. I have been 3D printing for years and have gotten by using tinkercad to knock up my own designs or crudely modify imported STLs. I am trying to move to fusion360 so that I can create more complex objects but it’s a really tough transition - even aligning two objects (super easy in tinkercad) is proving difficult.. This video is really helpful and introduces tools I had no idea existed. I’ll probably have to watch this 3-4 times before the technique becomes second nature. Thanks for taking the time. Ignore the negative comments I don’t think those people are the intended target for this.

[@TheNewDokiFromDdlc]

With your videos my learning curve will shrink drastically. Thank you.

[@meru-rc7ur]

I love this man!

[@petersilva4242]

Really appreciate Ur vids mate helping me learn alot of new tips.1 question my laptop keeps saying my graphics card might not be optimal to run fusion.anything I can do to improve performance apart from setting graphics to simple.as soon as my design has multiple parts fusion keeps freezing and when I try to sketch new parts or select a function keep getting error msg.cant upgrade graphics card as its built into board.cheers mate

[@Tonicwine999]

For some reason I am still unable to use this stl that has been converted to a body using Mesh to BRep. I needed to use the shape of the STL as a tool to cut something. I am unable to select the converted shape in the combine menu, I cant figure out why.

[@kwkstar]

Great video. Unfortunately the stl that I have falls into too many triangles category. So I thought I would recreate it using it as a template but it came in as 15000mm by 9000mm instead of 150mm by 90mm is there any way to change this.

[@svenmanthey5214]

I really appreciate all your videos. With your help I make career at work and can use my 3D printer in full capacity. Thanks for the great videos!

[@davidbutcher6637]

Hi i have a stl file of a part and want to add 2mm in the middle of it as the overall part is short,how do i do that with out affecting the overall shape of the part ?

[@djordjeblaga7815]

Straight to the point and very helpful. Thanks!

[@wolf9545]

Another easy way to take flat faces (non-radius faces) and get rid of the triangles is to: You can do this after you have converted your mesh file into a BREP. While the design history is turned off, go into the PATCH workspace. Click on MODIFY, MERGE. Click on the SELECT CHAIN option in the pop-up window and then click on a face. Once you hit OK give Fusion a little bit and it will take all those triangles that make up a flat side and combine them together. This won't work on any radius or curved areas but you can do what Lars did to help with those problems.

[@simoncole3080]

Excellent and informative. I'm on a steep learning curve and your tutorials are great. Keep up the great work Lars.

[@cadcamstuff]

That is awesome to hear simon cole .Thank you for watching the videos

[@kevinhart9006]

Thanks Lars! I've watched a number of your vids and they have helped me get into Fusion 360 (from some university Solidworks training many years ago). Very useful techniques for when creating the model from scratch is too painful :)

[@kevinhart9006]

When you use the paint 'select face' option, is there a way to stop it from selecting the faces behind the object (that aren't visible)? I keep inadvertantly selecting faces I can't see (and don't want). Thanks

[@55418und]

I need to move two threaded holes, the same way. Is that done with mesh as well?

[@typing_softly]

Lars is a good guy.Thank you for posting this

[@gabrielesabbatino2460]

Hello Lars! You solved my issue with this video, and then I subscribed immediately to your channel! Great job! Ciao from Italy.

[@cadcamstuff]

Awesome to hear. Thank you for watching 👍😊

[@tizwicky]

Best video EVER on modifying and editing STL files! Thank you!

[@cadcamstuff]

That is awesome to hear tizwicky .Thank you for watching the videos

[@JohnWaclawski]

Every time I watched your video's, Lars, I learn something. Thanks!! Keep 'em coming!

[@cadcamstuff]

That is awesome to hear John Waclawski .Thank you for watching the videos

[@TTTrouble]

Thanks a lot for this video. I think a video series on how to repair a variety of different STL files to customize them before getting them ready for 3d printing would be very helpful. It seems like there are a variety of tips and tricks that are google-able but not really consolidated into one series very well, and it is for sure a commonly searched problem. I suspect a series focused on that would get a lot of traffic, but I could be wrong. Anyways, thanks again for teaching, it was a very informative video.

[@online12plus]

what do you do to save it? do you have to turn it back into something?

[@davidbutcher6637]

So i made a drawing didnt save it but turned it to an stl but now want to modify it and i can load the stl into fusion set dont capture design history but cant convert to brep ?does not come up as a feature

[@oldsjunkie1]

Thanks for putting in the effort to make very informative content Lars. I find it odd so many comments are upset by the run-time and apparently offended by the "dismissal" of thingiverse... Any time a man with your level of expertise is willing to share some of it, only a fool would complain! Learning a lot and looking forward to more great direction.

[@cadcamstuff]

Thank you so much 👍😊 appreciate you taking the time to comment and watch

[@chrisleech1565]

You know Lars, yours is hands down the best channel for Fusion360 I am spending my entire weekend with your uploads :-) playing catch up and working on my very first designs. We are all richer for knowing you and all your good works buddy!

[@chrisleech1565]

P.s. the remark about the mesh circle being a wantabe was very humorous indeed. . A close up of the STL mesh is very cool at first blush. I first was aware of it years ago but not receptive yet

[@cadcamstuff]

Thank you Chris! Really happy that the content is useful! Have an awesome day!

[@patenglish1948]

I 3D print mostly figures that are circular, and since STL files are comprised of all triangles, is there a better format to export for 3D printing?

[@freddobbs100]

Very Helpful! I watch all your videos. Thank you Lars!

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@cepwin]

I’m learning fusion for 3d printing and I’m finding your videos very interesting and helpful! Thank you for your hard work!

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@gvet47]

So if I modify an still file and it has a hole if I do not convert it like you did here it will not be a smooth round hole when printed? Any contour if not smoothed will be a bunch of facets when printed?

[@cadcamstuff]

Hi gvet47 Thank you for watching! You will get what you see on the screen. So in this case the hole will be as round as the triangular shapes are. Best, Lars

[@farshadbagheri]

Hello Lars and thank you for all the fantastic and informative videos. Do you know what the limit is on the number of "facets" an STL file can have for Fusion to handle for a Mesh to BRep conversion?

[@cadcamstuff]

Hi Farshad Bagheri Thank you for watching! I think it is 30,000 but I am not totally sure. I have done a few videos on how you can reduce it if need be: kzbin.info/www/bejne/mXy7p3yNpbGim7c kzbin.info/www/bejne/hYmUhZKYnJlsaaM BEst, Lars

[@andrewdowney760]

Just wondering if you do commission work? There is a STL file Id like to gey professionally modded.

[@codyolive3127]

while trying to import a tube chassis stl. file from bendtech to fusion the dimensions are 10x overscale. after converting stl model to brep and changing facet count to achieve brep i try to scale dimensions of the chassis and due to the size of file and number of components fusion crashes, any help. im trying to create bracketry for the frames i design in bendtech using fusion.

[@TheTranq]

I ran into the same issue with the scaling

[@tomherd4179]

If text was to added to a STL imported file would the surface triangles have to be changed to a proper model generated surface? I suppose for machining the answer would be yes, but if only 3D printing maybe not?

[@neoxphoenix85]

Thanks a lot for this tutorial Lars :D If like me you don't have "Convert to Brep" by right clicking the model, just go to "Modify > Mesh > Mesh to Brep". Also make sure like Lars said to disable "Capture history" by rightclicking the top tree, at the bottom (Catpure Design History)

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@dorianfleurquin3093]

thank you !

[@thenic123]

Is there a way to simply change the dimensions of a downloaded stl object to specific measurements?

[@antoniopalattella3167]

Great teacher! I've learned a lot from your videos. Really clear! Thanks from Italy.

[@cadcamstuff]

Thank you for watching👍😊 Glad you found them useful

Is that possible to automatize the smooth solid conversion into other clean model without triangles? Thanks so much I appreciate the tutorial, very helpful

[@cadcamstuff]

Hi Rubén Romero Vivancos Thank you for watching! Check out this video: kzbin.info/www/bejne/aaezmZaXjtGSpNE Hope this is useful

[@jebadiaha]

Thanks for your videos. Very helpful.

[@LatheBits]

Excellent tutorial!

[@spikekent]

Fantastic tutorial as always. Thanks Lars

[@cadcamstuff]

Thank you Spike Kent

[@JamesCampbellPPG]

Hey Lars. Wasn't getting the Mesh to BRep option. Had to make sure the timeline/capture history was turned off. Don't know if you mentioned that or not in the video. Thanks for the help!

[@cadcamstuff]

Hi James Campbell Thank you for watching! Yes, that is an important detail! Thank you for pointing it out

[@willynilly3d994]

You've probably figured it out by now, but just in case, make sure you are in the "Model" workspace and it should show up.

[@lyteyearz5810]

10:52 please tell me why my line points won't snap to the edge corners (ends where those 2 lines meet). it only wants to snap to grid points.

[@aspenmallery]

Go into your preferences. On the design tab, enable "Auto-Project edges on reference". I had to google this myself too, as it wasn't explained in the video. At the beginning of this tutorial series, I think he tells everyone to do this but it's never mentioned in the follow-ups.

[@AndrewEbling]

Thanks - super useful. One question for you - when I import an STL file intended for 3D printing, make some modifications, then re-export it, the size is all wrong. Also while working in Fusion 360 if I measure the model, the dimensions are incorrect. Why is this and how to I fix it please?

[@RETROCUTION]

I just experienced this, too. What I did was bring in the original unedited .STL into my slicer and adjust the scale on the edited version to match it.

[@Alluvian567]

Is there a merge face command? It would be amazing if you could have fusion merge all connecting and coplanar faces into the same face.

[@darksideadv]

Hello, such a Lars, when I load the STL to Fusion 360, with dimensions that come by default in the STL of 100 mm x 100 mm x 5 mm, Adobe Fusion 360 resizes the model, or scales it automatically. When I'm going to print the piece in 3D, the measurements are resized 100%, if I reduce its size the circles where the screw threads change a bit. If the STL part passes through Fusion without affecting its size, it would be easier and faster to print parts.

[@Warfalcon]

Really awesome class here! Well done

[@cadcamstuff]

Thank you 👍😊

[@sttm1283]

tried this by following another youtuber. worked kinda good(tried to cut out a logo on a phonecase). then thing is that well it cut. but now i have empty space between bottom and top(inside and bottom of the case). meaning the model is open where the cutout suppose to be :(

[@cschmitz]

Wow this was a fantastic vid!! Thanks :D

[@cadcamstuff]

That is awesome to hear cschmitz .Thank you for watching the videos

[@kevCarrico]

fantastic! can the faces be merged before press/pull, or simply to clean things up? thank you!

[@cadcamstuff]

Hi kevCarrico Thank you for watching! You could reduce the faces in the mesh work space, or just try to select a few on a face and hit the delete key. Best, Lars

[@nssdesigns]

This is OK but I'm trying to do the same with a .obj file... The file is quads not triangles but I can't use the geometry to set sketch planes or pick points...it's just there as a body

[@frankvonthienen3862]

Cheers Lars for this video. You just picked the right time to make this video. I was up to that „problem“ a day ago and postponed it due to the complexity. So, you made may day.... I do appreciate your vids

[@cadcamstuff]

That is awesome to hear Frank von Thienen .Thank you for watching the videos

[@frankvonthienen3862]

Lars Christensen Yes Lars, when ever it comes up to F360 on the 3D printer groups on FB, I do recommend your videos, since they are the best as far as I can judge...

[@cupcakefights]

You're a very good teacher, thanks for uploading this. Unfortunately, what I am trying to do is too advanced for me sadly.

[@markph0204]

Very helpful for wanting to make small adjustments to STL's!

[@cadcamstuff]

That is awesome to hear Mark Hurley .Thank you for watching the videos

[@Auday365]

Thank you Lars, another great video. Is there any app on Fusion store that will do all the cleaning of .STL model?

[@cadcamstuff]

Hi Auday Sami Thank you for watching! Not what I am aware of. If there is, it would be messing with the tolerances of the model. I hate to say it, but STL is a "you get what you get" file type.

[@Anthsv8]

Hi Lars thanks for all your Videos I have leaned so much about fusion I am having some trouble with this STL file I am trying to make some changes to. I've uploaded it to my library and i have gone into my preferences and selected the Mesh work space box but when i right click on the drawing I don't have the Mesh to Brep in the menu! do you have any idea how I can find it?

[@cadcamstuff]

Hi Anthony Muscat Thank you for watching! Make sure you turn off the history at the bottom of you screen by right-clicking the top of the tree on the left and select the last item on the list

[@Anthsv8]

ok thanks

[@MonkeyBoy_Prints]

This is definitely more what i'm looking for as I am using your tutorials to learn fusion so I can design my own things for 3D printing. I learn a lot from watching your videos and actually enjoy your content. Any other videos you could possibly do on STL files and 3D Printing techniques would be much appreciated. The knurling in #116 was also super helpful and made my life so much easier when modelling patterns. Thanks!

[@cadcamstuff]

That is awesome to hear demon41199 .Thank you for watching the videos. I will consider doing more 3D Printing stuff sooner

[@jarrod-smith]

That would be great. I suspect a good bit of your audience use F360 exclusively for 3D printing. I know I do, and all of the 3D printing internet outlets I visit refer to using F360. And your tutorials get frequent mentions as a good way to learn.

[@eperez99]

Yes, 3D printing stuff!

[@OldCurmudgeon3DP]

Trying this on a thingiverse stl as you do commands & options in the vid. Mine always also selects faces behind the plane I'm working on.

[@OldCurmudgeon3DP]

I ended up just using Inspect to get the dims (STL imported at 10x) and rebuilt the part.

[@danijel124]

My pc would burn up doing this... Is there a way to reduce triangles in fusion?

[@Hermy21]

Thanks! Informative as always. :)

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@vaughanza]

Thanks for another awesome tutorial

[@cadcamstuff]

Thank you Vaughan Lundin

[@anthonyroby296]

Very handy video. I had to make a small modification to a model I pulled down from Thingiverse and this helped a lot. The only thing I struggled with was the scale. I File|Opened the model and it came in at 10x the size. But I was able to do the BRep thing. If I imported the model, there was no BRep menu item, so I was stuck. In the end, I just used File|Open and scaled to 0.1, which was sufficient for what I needed.

[@anthonyroby296]

Just found out that turning off Capture Design History makes the BRep menu option appear!

[@el_kaleb]

@@anthonyroby296 I read somewhere that to insert a mesh file (stl) into Fusion 360 with the original dimensions, you got to use the insert feature. And also, I did what you suggest, turning off Capture Design History and I was able to convert to BRep with the original size. Cheers!

[@allcustomz1922]

Its been a while since i watched thanks for the video love watching gotta catch up. Thanks lars

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@lawrencemccoy]

Thank you for all the help.....

[@azeventure]

thank you... this video is awesome

[@matthewcorcoran4562]

I forget which of these I commented on before about shrinking the mesh. I figured it out. I was trying to use a - like I would for extrusions and such, but I realized that anything less than 1 would work to shrink the mesh. 0.01 for example. Now to figure out how to merge it into my part....

[@cadcamstuff]

Glad you figured out the problem :-)

[@KAFA2020]

Dear sir, Where to get the file ? Please could you upload the stl file here?

[@cadcamstuff]

Hi MD. MUBARAK HOSSAIN Thank you for watching! Here you go: a360.co/2LmhjYh

[@diego_garcia_cacho]

really useful lars

[@cadcamstuff]

Thank you diego Garcia

[@timbass9822]

Hey Lars. I'm a novice using the Fusion 360 version 2.0.10813, Active Plan: Fusion 360, Personal, macOS 10.15.7 and have no problem importing an STL file as a mesh and turning off history; but after that I never get an menu item "Convert to BREF" or similar option; even after hours of trying. Any ideas?

[@charliebrownn6622]

Hello Tim! i have the same problem, i found the solution in the 2:50 minute in this video kzbin.info/www/bejne/qoeqpXpjis-fj8k "Mesh Tab" --> "Convert Mesh" i think they make more simple in the 2021 updates.

[@Elevationnation04]

@@charliebrownn6622 thank you!!!

[@anteojafari7942]

You can press “s” on your keyboard and search mesh to brep (or any other tool if you having trouble finding it)

[@connor1st]

Hi Lars, (And everyone else)! Fusion actually has a really neat built-in feature. After converting stl's to solid bodies. Instead of having to select and extrude the whole face simply select one triangular face and then delete, Fusion then figures out all of the separate faces of on plane and turns then in one single face you can work with.

[@dennislokken7003]

This seems to only work for me if I use File-Open and delete the faces. However, importing it using this method results in the dimensions to be completely wrong. If you import it using the Insert mesh option, then the dimensions are correct but it absolutely will not let me delete any faces.

[@connor1st]

@@dennislokken7003 the scale often comes through 10x if you use the scale command with a factor of 0.1 you should be fine. I don't know why it comes in so big.

[@dennislokken7003]

@@connor1st :Thanks. I had actually tried that yesterday and scaling seems to work. And it is really hard to tell for certain but the 0.1 scale ratio seems to be correct. It definitely makes working with the stl files easier. I just found it interesting that there are two different ways (inserting or opening teh stl file) and they don't work the same.

[@danieladamczyk9617]

Hi Lars, Great video! Very helpful, I have a question regarding my issue. I need to modify one STL file because one part of it is too narrow. Do you have any suggestion how to do that, or maybe you have a video on where I will find the guide. Thanks a lot!

[@cadcamstuff]

If you turn it into a solid you could possibly use the extrude command to add more volume

[@iulianiasi]

I manage to do some things thakns to you . Thank you sir.

[@acolombo]

Very helpful! Does anyone know where does Lars accent comes from? In particular when he says Patch or Change or Watching, the sound for ch, is it from a specific accent or area? It's just a little different from the people I usually listen to. I'm just curious because I am an Italian speaker and from my specific city we have that sound in our accent and other people usually don't lol, and I never heard it from english speaking people...

[@alexanderwillems5685]

I'm fairly sure it's a danish accent

[@gral6874]

The Danish flag on the shelf might be a clue :) 🇩🇰

[@johnesteer9537]

you made those changes can you now export to stl to incorporate those changes?

[@cadcamstuff]

Sure. If you go to tools, you can choose Make and send it as a stl to your printer

[@gasphase]

thanks Lars, your videos help a lot... in this case i had to find a solution to a minor yet important step, before inserting the .stl file, you need to select the "Do not capture design history." first :) if not, the B-Rep feature doesn't show (sorry if this was mentioned already)

[@cadcamstuff]

Hi gasPhase Thank you for watching! Yes, very good point! Best, Lars

[@ristorinne5817]

I have tried with cats and dogs to find a way to modify an STL file. If i for example have a .STL file of a box witch wall thickness is, lets say 4 mm. Then i import it to Fusion 360. How can i change the wall thickness from 4 mm to 2 mm? Or can i? Or if there is a hole on the box and i want to change the diameter on the hole? Any one know? Thank you.

[@petternordgren2703]

No offense, but that is precisely what this video was about! He imported an STL-file, made a wall thinner and adjusted a hole... I suggest you look at this video stating at about 6 min 10 sec. for the wall and at 9 min 20 sec. for the hole. What I discovered though is that features in Fusion 360 have moved and/or been renamed, but with a little bit of fiddling it was fairly easy to find them.

[@tiloreuter796]

Very good explanation how to tread STL models!

[@cadcamstuff]

Thank you 👍😊

[@palmerinsull2455]

I was literally about to email you about this, thanks

[@cadcamstuff]

Hi Palmer Insull Thank you for watching! ANd Perfect timing then :-)

[@cureaid84]

Lars how come when I go to use inspect something from thingiverse it gives me these insane numbers like it's telling this part is no more than 5 inches and it says it's 1300 mm

[@radius-fpv2186]

Hello I have the same issues with stuff from Thingiverse what I normally do is while in solid go to modify and scale it select the model and the scale factor will be 1.00 change it to 0.10 then OK it should be the right size

[@cureaid84]

@@radius-fpv2186 thanks I can finally get moving with my prints

[@mneliason]

Awesome video is there any way to have files loaded at the correct scale?

[@cadcamstuff]

Hi Mace Eliason Thank you for watching! YEs, Use the Insert Mesh button from the drop down menu.

[@rosylovescake]

I have an SLT file with 50000 faces but its hollow. I've searched everything and cant find a way to fill it? I need to put it into ABAQUS so it needs to be solid. Can anyone help?

[@xtc3dresearchteam744]

Meshmixer?

[@TheBrassn]

At 15:15 you say that having these triangles is going to show up in 3D printing. That got me wondering which workflow you use to 3D print. For example Cura will only accept mesh based fileformats and thus will always suffer from this inaccuracy. Even Simplify3D removed the option to use g2 and g3 commands. Am I missing something?

[@DigiFootageFX]

All 3d printers will convert the model to triangles in the end. Every single one of them. So Fusion 360 isn't getting rid of triangles. It's just hiding them and changing vertex order. However, the triangles are still there behind the scenes and under the hood. Every model gets translated to triangles when they export to a 3d printer. There are no real exceptions. Only CNC machines and lazer cutters truly work with B splines all the way through the process.

[@TheBrassn]

@@DigiFootageFX Yeah that was my point. I was hoping the creator would have a real magic trick to support his claim. Marlin theoretically supports real curves, but then again internally splits them to smaller linear travel moves at a customizable resolution. I believe Fusion 360 internally is indeed getting rid of triangles in this process. But then again at no real advantage after exporting to an STL file, though the resolution and thus the deviation could still differ when compared to the original file.

[@DigiFootageFX]

@@TheBrassn I'm skeptical that Fusion 360 actually gets rid of any triangles under the hood. I'd have to investigate the actual topology process of the software, but if you notice there are still vertices and edges which make up that hole, so unless the new surface was detached to a completely separate object, It has to be interpolating the new surface with underlying triangulated geometry to correspond with the edges on the rest of the model. I use triangulated topology from 3dsmax and Blender for 3d printing all the time, and as long as they are planar, there's no surface issues in the print.

[@gnydick]

Hey, slightly related, I'm trying to work with a mesh directly, like moving faces, etc., but I keep getting errors that the delete and replace can't work. I've also tried converting from BRep to T-Splines and that doesn't work either, I get these weird squares all over the place, sticking out from the borders of the object. How can we REALLY effectively work directly with mesh tris?

[@cadcamstuff]

Hi Gabe Nydick Thank you for watching! Did you see this livestream? kzbin.info/www/bejne/mXy7p3yNpbGim7c Hope this is helpful. Best, Lars

[@gnydick]

Lars Christensen yeah, not really what I'm looking for. I get the model to be a brep, because it's not that complex, but most of the tools fail to modify it, I'm guessing because of the high number of tris. The mesh editor has very few tools. For example, I have a battery case model in STL and I want to thin the walls. It's not exactly a rectangle, it has some curved surfaces and ribs on the outside.

[@lyteyearz5810]

12:20 Is what I'm here for. Just need to make the shaft hole on this lathe chuck I found on cults3d smaller (who the hell thought that was a good name for a site?meh... shrugs lol). Anyway thank you so much! Ultra newbie here lol. This alone was like a needle and a haystack to find. So much easier to edit in Sketchup but I want to run with the big boys one day so fusion it is. (no disrespect to sketchup) What a sigh of relief!!!

[@johnbickford9221]

Another way of getting a STL file into Fusion is to go to insert mesh and import it there. Of course you have to turn off design history before you can select convert mesh to brep. If the facets (faces, triangles) is too much you can switch to the mesh environment and use the reduce faces function and get it to less than 10,000 which is the preferred limit. Usually you can get away with the reduction depending on the model. Flat surfaces with triangles breaking them up sometimes can be automatically repaired just by deleting a triangle or two.

[@cadcamstuff]

Hi John Bickford Thank you for watching! ANd thank yuou for the great comment!

[@harrischristmasvideos]

Lars, your videos are amazing, but I am having a problem following along due to the version differences? I cannot get the Mesh workspace to appear using Fusion 360 student ver 2.0.9512. In the Preferences screen, there isn't a Preview option but a Preview Features which has TON more options and I selected the Mesh Workspace option and then apply and save, but I didn't get the Mesh Workspace option in the dropdown in the upper left hand section and I didn't have the Model Workspace either so I wasn't able to follow along because I didn't have the option I need. I closed and re-opened Fusion just in case and still the workspaces were not available. Any suggestions or other video to watch? (I will eventually watch all of your videos! LOL) PS, I do have the history disabled

[@lukkimen]

Hi Rick, I just had the same problem. In the newer version of Fusion360 it is no longer in the Design dropdown. It is now in the menu above the ribbon. You'll see SOLID, SURFACE, .. and also MESH. Hope that helps. br Paul

[@holger7466]

Had the same issue. My problem was that Fusion 360 didn't download the mesh-update or installed it properly. Deactivate the mesh function and apply. Then activate and apply it again. That solved it for me.

[@EastwoodFabrication]

So you dont go into what to do if the count is too high for "Mesh to BRep" Im still trying to edit my file

[@cadcamstuff]

Hi boneyard101 Thank you for watching! Did that in another video: kzbin.info/www/bejne/mXy7p3yNpbGim7c kzbin.info/www/bejne/hYmUhZKYnJlsaaM

[@joaoflorencio7316]

Very nice vídeo

[@savoylen]

Where did "reduce" go when the STL has too many facets?

[@AksuHoo]

Why imported STL files models dimensions are way more bigger that they really are? I downloaded from myminifactory.com one STL file and opened it with Fusion 360. I measured height of the model and it seems to be about 1500mm. Then I opened same model with Slic3r and it fit to my Prusa i3 MK3 printing height, its about 110mm height. Can somebody explain me this, please

[@AksuHoo]

solution: forums.autodesk.com/t5/fusion-360-design-validate/why-are-fusion-dimensions-10x-greater-on-imported-stl-files/m-p/8426000#M175626

[@cadcamstuff]

Thank you for sharing the solution :-) ANd for watching!!! Best, Lars

[@meme-hj5rs]

really useful Thank you again

[@cadcamstuff]

You are so very welcome :-) Thank you for watching!

[@gvet47]

I had to come back to this a second time to see if I missed something. When I have tried to modify a file I find that it gives me dimensions that are not valid . If I try to extrude a part it may say it is way bigger than it is. If a projecting shaft was 3" I may pull it out what looks like a 1/2 more but it may say it is 6"! If you understand.

[@cadcamstuff]

Hi gvet47 Thank you for watching! Try to do this in metric. I need to talk to someone on the development team about this. There might be an issue with the standard option.

[@gvet47]

Lars Christensen I have also been trying to find a way to make surface texture on flat faces. Learned how to knurl on a round per your video but would like to do on flat face.

[@glenna3434]

I am frustrated and confused.......I have the July 2021 version of 360 so it doesn't translate. None of the "buttons" match your instructions.

[@Mikeyfix]

Where did my (save to stl ) command go in my drop down menu go, now I have ( save to mesh)

[@TOMA21207]

You need to export to stl.