Quick Tip - Exhaust Pipes and Clamps

Don't forget to Like and Subscribe for more! - goo.gl/XtV9CJ
Here's one seemingly minor detail that can go overlooked with Diesel Exhaust Pipes and clamps. Something so simple can really slow down assembly and cause a lot of frustration.

[@massmayhem5067]

Great tip on the clamps!!! My mechanics have replaced the gaskets five times and it kept leaking. I go out and check, sure enough they are on backwards!

[@SFMARK69]

I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!

[@hddm3]

Great tip. Something you could easily over look

[@madmotorrepair1748]

Thanks for a educational vedio, exhaust leaks causes fault codes, and can lead you in a different direction in diagnosis, if you don't check for good tight exhaust connections!

[@TheDieseler]

+Mad Motor Repair That is very true. Glad you liked it!

[@lokiepokie617]

I was about to swap my bellows for a flex pipe to save money but after your video I’m just gona spend the extra money and get the same part thank you

[@unknowtin1621]

Thanks for sharing knowledge

[@CashNYC]

Great video

[@cpt_disco]

Sorry if I missed it, but did you say which orientation it should be? I.e does “steeper angle” side sit on muffler side or dowpipe?

[@harpreetsingh-sd2vb]

Great tip

[@rubberduckyconvoy2723]

THANKX A LOT for education.

[@CashNYC]

Can u make a video on the isolator bushing on the gear stick on freightliner cascadia?

[@onehunnid7856]

Thank you Sir!!!

[@Bosnianfear15]

Thank you

[@SFMARK69]

I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!

[@pedropedro2837]

Thanks you are right I made big mistake Thanks

[@Thomas_Jefferson1]

Thank u!

[@jeffreylopez8691]

Wow I put everything new and still leaking i sure this is my probleproblem, tha k youuu

[@rclarke2456]

Men you are not lying man it's an headache I'm still trying to figure out why I'm still having leaks when I do Regen on my dd15 It leaks from the turbo pipe to the flex whatever that pip call flange Bell pipe whatever it's called and then the second elbow I think they sold me the wrong clamps I'm not sure what size or how or what.

[@samyelalem]

I am having the same problem in the same location on my volvo. I have been through 4 clamps and 5 gaskets. It is still leaking. Did you ever fix your problem? And how?

[@SFMARK69]

I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!

[@nachoojeda3437]

👍

[@SinghSatnamable]

New volvos don’t have bellows. You have to buy the whole turbo flex pipe and it’s $1400 CDN. WHAT A RIP OFF