Quicksilver & Candy2o Anodized Look- Createx Tech TipZ Thursday- BrusHstroKeZ

[@ncstonecrew]

All your videos are very informative. Thanks for sharing and posting the tool list.

[@BrusHstroKeZ]

ThankZ Todd. Let me know if there's anything specific you'd like to learn or know about and I'll do my best to make a vid. Appreciate your support!!!

[@swc-diygarage]

Very nice. Really liked the candy spoons. Keep up the great work.

[@BrusHstroKeZ]

SW Customs ThankZ man! Yeah the candy over chrome looks way better on a curved surface. Should have done the demo on a spoon too.

[@hobie1dog]

outstanding thanks

[@BrusHstroKeZ]

ThankZ man! Hope it was helpful.

[@GabeM_13]

Great video bud! I'm having a problem getting the anodized look... I try again after watching this!

[@BrusHstroKeZ]

ThankZ man! It is a tricky effect to pull off. Quicksilver and candy r the hardest Createx paintZ to spray. When going for anodized look, try to remember that less is more. 3-4 super light coats of Quicksilver, then the same with candy. If u over saturate either one, it will take away from the anodized look. It’s really something u just have to keep trying until u find ur sweet spot with it. My gun is usually set to less than 1/2 out on the fluid when I do this effect, very little material each coat.

[@GabeM_13]

@@BrusHstroKeZ i appreciate the feedback brother! I tried several times and it's coming out watery. I'll try again later. It was molting up

[@BrusHstroKeZ]

@@GabeM_13 Have to go super super light with material or it does that. Hope this helpZ and good luck.

[@GabeM_13]

@@BrusHstroKeZ yes sir! I'll give it a try... I may end up calling you for tutorials lol

[@BrusHstroKeZ]

No problem man. My phone number is on my website and FB page, linkZ are in the description of all my vidZ. Always happy to help!!!

[@Blade4127]

Just getting into airbrushing and just discovered your channel! What do you use for clear coat?

[@BrusHstroKeZ]

ThankZ for subscribing! Let me know anytime u have a question or need help. I use strictly Tamco clear coats. Either their 9500 Hi Impact 30min Speed Clear or 2104 Euro Clear/High solids show style clear. Available at Spraygunner.com or TamcoPaint.com, linkZ in video description above 👆🏻

[@Blade4127]

@@BrusHstroKeZ I haven’t picked up anything yet but have the airbrushes in my cart at spray gunner. I’m getting them mainly for painting models. What paints would you recommend? I was leaning toward the createx stuff.

[@BrusHstroKeZ]

@@Blade4127 Createx will work, but there may be other paint lines that work best for models. I’m not sure as I don’t or haven’t done any models yet. I would just give Spraygunner a call when ur ready to make ur first purchase. Their team is great and some of them specialize in models and will be able to give u the best recommendations for paint, airbrushes, and any other equipment u may need.

[@shaun7057]

What colors were used on the first 2 spoons if you go from left to right? Everything you sprayed looks amazing good job man 👍

[@BrusHstroKeZ]

ThankZ man! First one is Blood Red and second is Sunset Magenta Candy2o. Both r over 4 light coatZ of Quicksilver Chrome.

[@pablofrancis5486]

HI, do you know if the quicksilver chrome is discontinued ? the wicked color W351 silver supposedly to replace the quicksilver chrome?

[@BrusHstroKeZ]

Hi Pablo. No, it is not discontinued, and probably will never be. It's used a lot by model builders and in cosplay/movie makeup applications. Wicked W351 Silver is a completely different look than Quicksilver. Quicksilver is now W357 in the Wicked line. Here's a link to the best/cheapest place to get it from: spraygunner.com/wicked-colors-quicksilver-w357/?aff=13.

[@pablofrancis5486]

@@BrusHstroKeZ thanks for your fast response. If I understood correctly W357 is now the quicksilver chrome or 4104 continuous?

[@BrusHstroKeZ]

@@pablofrancis5486 Yes, W357 is Quicksilver Chrome's new number. The Auto Air line is being discontinued/moved to the Wicked line. So some of the product numberZ are being changed to the W numberZ. So W357 is the same as 4104.

[@pablofrancis5486]

@@BrusHstroKeZ ok I got it thanks a lot

[@BrusHstroKeZ]

No problem man!

[@devin4560]

Why did you use mix with 4040 for the anodized look versus a UVLS?

[@BrusHstroKeZ]

Devin I haven’t tried UVLS with the Quicksilver yet and not sure how well it would work. I saw Craig Fraser, Createx Tester, use 4040 for this technique. The 4040 helps to keep the candy from migrating and more uniform. Also will help prevent bleed if painting over it as well. UVLS might work. I will have to try it out one day.

[@BrusHstroKeZ]

kzbin.info/www/bejne/hmenhHWthJd0gqs

[@Aviopic]

@@BrusHstroKeZ in my experience the candy bleed was caused by the 4012 reducer reactivating the previous paint layer. With 4011 I don't have this problem anymore even without the 4040. The 4050 is a bit tougher than the 4040. Cheers.

[@BrusHstroKeZ]

@@Aviopic Sweet! Good info. That will save some tome and material. ThankZ man!!!

[@Jarhead1313]

Hey bro let me ask you something. I've been airbrushing my RC bodies for about a year now and am wanting to start doing some Candy Jobs. Well with RC bodies you paint in reverse so I'll be laying the candy first and backing it with the Quicksilver. So my question is, about how many coats do you think I'd need to do to get the colors you have on the spoons at the end of your video? Also I heard I'd need to do a 6 parts 4050 and 1 part Candy. I don't have any 4050 yet but I do have 4030. Anyway any advice will be greatly appreciated!

[@BrusHstroKeZ]

I do 4 light coatZ of both candy and Quicksilver. I usually mix 2:1 UVLS to candy. You can use 4030 but 4050 is better with candy. You could try to find some clear spoons local or online and try it out.

[@remcogroenheide2701]

What is the name of the second-last and the last one?

[@BrusHstroKeZ]

The 2nd to last is Candy2o Deep Purple over Quicksilver Chrome. My favorite one! The last one is Midnight Blue over Quicksilver.

[@Jobannigarcia017]

Name of the airbrush gun?

[@BrusHstroKeZ]

That is an Iwata LPH-80, with a 1.2mm needle/nozzle and the E4 air cap. It’s a mini spray gun and the best one ever made!!!

[@byakuzac]

what type of clear coat do you used? high gloss?

[@BrusHstroKeZ]

Yes, Tamco 9500 2k clear.

[@did3d523]

where are spoone?? fake

[@BrusHstroKeZ]

LOL😂 Nothing here is fake. Maybe you’ll see some stuff ur eyeZ won’t believe though. Watch until the end, they’re in there, with the panels I did in the vid. Did them the candy over Quicksilver way in all the colors.

[@did3d523]

@@BrusHstroKeZ Vignette with spoon and no spone in video fake to make buse

[@BrusHstroKeZ]

@@did3d523 Sorry if u can’t understand English, but the spoons r at the END of the video 12:10. No, I did not paint them in the vid. Picture is to show what is possible with this technique.

[@aldosv73]

dude music sucks, just tell us what your doing! \

[@BrusHstroKeZ]

Sorry u don’t like this style vid, but otherZ do so I will probably make more like it. U can always hit the mute and just read the step by step. Or find me some good copyright free music, I can’t find much and not wasting time to look for anything new. Appreciate ur support🤘🏻

[@robertfousch2703]

Get rid of the loud music and concentrate on the paint and painting. The music was annoying for 12 full mins.

[@BrusHstroKeZ]

There is a mute/volume button if you don't enjoy the music. If you watch my other videoZ, you'd know I do many different styleZ of videoZ including live streams. Some of my subscriberZ enjoy these types of videos. I'm not changing to make anyone happy. Please feel free to watch my other vidZ where I do voice overs and/or speak throughout the process and there is no music.

[@GpaL-ix7vl]

@@BrusHstroKeZ Great vid...music noted...but, you can reduce the volume about 50%(background music)....no worries, nice job! 🙏