Step-by-Step Guide: Creating VLANs on Grandstream GWN 7800 Series Switch

[@PE4Doers]

An excellent video Tony, as usual 😊 Of course I crushed the 'like'..

[@QuikTechSolutions]

Appreciate it David. Thanks for watching.

[@TechMeOut5]

Great video as always Tony. simple, clean and easy to understand. great job!

[@QuikTechSolutions]

Thank you Avi! Have a great day!

[@JasonsLabVideos]

Sweet, nice clean video, these look like a nice unit !!

[@QuikTechSolutions]

Hey Jason, thanks for watching.

[@TVJAY]

We just had a broadcast storm on Thursday because of a misconfigured NIC. Only took down one small part of network because of VLANs

[@QuikTechSolutions]

Thanks for watching and sharing this information.

[@55555Luc333]

Thanks Tony!😀

[@QuikTechSolutions]

You’re welcome. Thanks for watching.

[@Red1Wollip]

Tony, do you think you might be able to do a video on the proper setup for a Grandstream DP750 with DP 720 phones?

[@QuikTechSolutions]

Hey Dennis, I don’t have that gear but I did this exact setup for a remote client 2 years ago. Let me see if I still have my notes. If I do, I’ll email them to you.

[@Red1Wollip]

@@QuikTechSolutions Tony you are the best! I have three remote phones and the 750. I really need the help with it my friend.

[@QuikTechSolutions]

Email sent.

[@tokoiaoben3842]

I use Cisco 2960 switch with pfsense in my office LAN. Do you think Gramstream switch is a good replacement ? By the way thanks for sharing this nice and clear guide. Can't wait for the inter vlan routing part

[@QuikTechSolutions]

Thanks for watching. The Grandstream switches are solid and well made. They offer a ton of enterprise options as well. Depending on the size of your office, I wouldn’t have a problem installing a Grandstream switch.

[@LifeIsABigQuiz]

I need your help to configure one vlan per ports ( I have 2 ports connected between router and switch)? Example I have router sfp1 connect to switch sfp 3 and router spf 2 connect to switch sfp 4, created 2 vlans (86 and 89), tagged port sfp3 for vlan 89 and tagged port sfp 4 for vlan 86, but only vlans 86 get ip from dhcp, vlans 89 will not. But if I set tagged port 89, 86 for each vlans then vlans 89 will get the ip address, however all traffic go through sfp 4 only (vlan 86). I’m trying to make it work but no luck, the main purpose is separate the port traffic between router & switch (I’m using gwn7003 and gưn7802p

[@QuikTechSolutions]

When I have some free time, I’ll try to replicate this setup in the lab and do some testing.

[@Ressy66]

@6:00 the switch needs to be smarter and do this bit automatically, or at least offer a check box to do it in the previous step

[@QuikTechSolutions]

Agreed! Although, it does automatically exclude the port from the other vlans once the type is changed to “access.” Thanks for watching.