R.I.P PPF | Save a fortune do it yourself!

For all Detailing Services and PPF and VINYL and Ceramic Coatings
Contact Freshlayers here:
freshlayers.co.uk/
waxisdead.com/shop/
Use discount code "forensic10" for 10% discount.
#freshlayers #waxisdead
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing
Tracks Used:
Fyze - Alone
Carbon Citizens - S.R.T
Music released by Carbon Citizens
Original Upload: • Carbon Citizens - S.R....
Click Here To Stream On All Platforms: fanlink.to/CCallstream

[@Terence-mk9jh]

Its so refreshing to see a video that clearly explains why you should not do this at home. If you want a professional job then pay a professional. Full marks for trying though.

[@rice-rocket]

Hello Jon, Great video. That is always the mark of pros, like the lads at Fresh Layers. They make a process look easy and it lulls the rest of us into thinking it is easy and giving it a go.

[@TerrificFlow]

4/6 comments are from bots with porn as their profile picture. Good job youtube

[@kinetic747]

I struggle putting cling film over leftovers, no way am I attempting that! 😂

[@mikey_fresh]

🤣 This comment wins

[@simonyounger9583]

Good effort Jon but I think Martin's laugh said it all!

[@79blustone]

Dust in the air but also dirt probably on the bottom of the sheet of paper the ppf was on. The paper side was on the bonnet. They waxy paper always seems to become statically charged attracting dirt. That probably a way dirt got onto the bonnet. Its bloody hard. I've just given it to my ppf installer to do who is an absolute legend 🙌 shout out to Justin at exclusive car care. 🙌

[@acey4994]

I tried to do just my head lights and gave up after about 10 trys it's hard.

[@kennythomsonjr5553]

Not only pay a professional. Find an incredible professional and pay their worth.

[@theredscourge]

I think they sabotaged you by putting those sheets on a dusty table so that when you laid the sheets on the car with the backing side down, it deposited thousands of little dust specks onto the panels. You would probably need to have some canned air and dust off the table first, then dust off each sheet outside before even bringing them in, then carefully wash both sides with the backing still on. You also probably needed to do another rinse off of the car once you drove it into the building. I think they also always do at least a quick fine polish of all surfaces to ensure any stuck actual paint contaminants come off.

[@ForensicDetailing]

No they gave me the kit all rolled up and clean.

[@k17sher]

I like to know how they stop dust in the air landing on the paintwork before the film is laid down. I couldn't even avoid this happended when I put the screen protector on my mobile phone.

[@Michie1391]

Spray and wipe of the backing of the ppf before peeling off. Also spray and wipe.off the panel with the squeegee straight before putting it on the panel, wet everything. Clothes, floor, ppf around the panel.

[@theredscourge]

I think that room when properly prepped and filtration system is turned on is basically like the same sort of cleanroom environment they use for professional car painting. They probably mist all surfaces of that entire room front to back, sweep out all the dust, then blow filtered air through it through filters for a few hours until as much dust as possible is trapped against the filters

[@Markycrewe1]

Tbh I think you gave it a good shot mate. It looked better than when I tried to tint my car windows 😂

[@F9LMP]

Excellent video and content, awesome channel this, thanks for your tips and tricks

[@theredscourge]

Prediction before watching the video: Bumper and complex curves are going to be hell, rest of car not so bad. Edit: Yeah pretty much right I guess, with the added caveat of that you probably need to spend more time decontaminating your workspace, probably 2-3 stages of wetting down every surface top to bottom and getting all dust out, which means most people wont be able to do it in their home garage That being said, how much time did you take beforehand to research the techniques? This would be really helpful to know, because someone who watches 3 hours of how-to videos and taking notes is probably going to do better than someone going in blind.

[@DryUrEyesMate]

Applying anything like PPF or Painting is easy, it’s prep work before which is key to get right to achieve a good finish.

[@ForensicDetailing]

Your welcome to come down and show people how it's done. We film end results though.

[@melmehmet4510]

I know it's unrelated to this video but what are your thoughts on snow foaming and jet washing the inside of the engine bay? Just saw you riding under the bonnet and thought i I'd ask. Brilliant channel BTW!

[@killacamfoo]

I love detailing as a hobbiest but I would pay to have someone do this to my car.

[@paulb9630]

Reminds me of when everyone tried to tint their own car windows in the 90s 😂😂😂 looks easy but it’s not .

[@davidboyce6427]

Always good to see Martin. Mad respect to him🫡

[@Detailzlondon]

10/10 for the effort

[@deathstar8072]

There is an old saying "Go with what you know" and it usually proves to be right.

[@jamesfoote8916]

I did my Jaguars bonnet and bumper plus side wings. Never ever again my advice is get someone to do it that you are recommended James

[@F40pete]

Its practice like anything else the more you do it the better you will get at it Fun to watch anyway

[@Retset]

8:27 - This would be me for sure lol

[@mo-r-racing]

any reason you still prefer clay bar over the clay mitt thing as you seemed to like that product and covers a larger surface area. Would you still recommend the mitt for beginners like me?

[@ForensicDetailing]

i think clay bar pulls better. but clay mitts can cover a whole car a lot faster. if I could only have one then its clay bar.

[@ChazR25]

3:53. I'm thinking that if you wiped this off in an attempt to remove small contaminants and then resprayed immediately prior to installation, it may have gone better. I don't know much about it, just thinking out loud. I've only messed around with tint in the past and that can be a PITA to work with.

[@ForensicDetailing]

guys told me. you need to squeegee the panel. and also have the PPF piece ready to go stuck on the wall ready to be transferred. that will help solve one of the problems but theres so many other problems. The edges are a nightmare. And so was like the front bumper. just dont try it you have been warned. but it is awesome fun and one day i would love to be able to do this properly.

[@ChazR25]

@@ForensicDetailing No doubt it would be a great skill to have. Practice, frustration, and lots of waste and we could all get there. The complex curves on some front fascia's could easily drive someone insane lol

[@HulkRS.]

can anyone shed light on PPF iv noticed watching people fitting it there dragging tools over the wrap and you can see the marks it leaves behind once finished is that easily buffed off or are you left with the swirls etc from fitting? seems pretty counterintuitive if that's the case

[@mikey_fresh]

We use self healing films , any marks and swirls created from the tools the film will self heal

[@1977JohnBoy]

when they do it they turn on the extractor fan

[@mikey_fresh]

We don’t have an extractor fan in there 😏

[@AndrewGibson22]

I would end up under the PPF 🥸

[@teemu3370]

Clayed but not polished.. Oof

[@kajukuja]

🙂👍

[@danstimelessclassics5899]

😂 you gotta just leave some stuff to the pros ....it's a practice makes perfect and these guys have had years and years of practice so unless you want to do it for a living don't bother....pay a pro 😂

[@TheFuxxoWorksGarage]

just proves me right. never will i ever do this job myself 😀