🪂 Race Car Parachute Tether Mount Redo / Here’s How I Fixed My Issues 💥

[@rodneyfelder383]

Hey buddy, your getting there. The improvements are going to be nice.

[@ThePaintPaperHustle]

Thanks man

[@challenger1320]

Safety glasses brother, it doesn't take much for metal shavings to get in your eye. I do enjoy your videos by the way! And don't get rid of that ProCharger, fight the Turbo urge brother... ✌

[@ThePaintPaperHustle]

Thanks buddy

[@philbetthauser9547]

The parachute pipe was definitely a challenge. It turned out really nice 👌

[@ThePaintPaperHustle]

Yes sir thanks

[@keithgriffith6002]

Grinders and paint all welds look good.

[@ThePaintPaperHustle]

😂 I like that

[@richardbrady2818]

Good work, remember also when bending any pipe if you're afraid of kinking the pipe you can fill it with sand and cap it somehow while you are working the pipe, just sayin

[@ThePaintPaperHustle]

Yes sir you’re correct. I actually wrote that in the video at bottom of screen if you noticed

[@richardbrady2818]

@@ThePaintPaperHustle How funny is that, I was FF through the video did not see that, hey we all be thinking the same , cool

[@ThePaintPaperHustle]

@richardbrady2818 lol great minds think alike

[@Amxracer]

Cool 😎 !

[@ThePaintPaperHustle]

💪🏻

[@LoneWrencher]

that is the same spot i mounted mine on my comet .my license plate barely fits

[@ThePaintPaperHustle]

Awesome! Yea I can cheap it down alittle

[@funfun8095]

Next time you go to do some welds, try making a bunch of, little e's, connected together. Don't just try and weld a straight line. Little e's and don't outrun your puddle. And if that's flux core, weld by pushing not pulling. Worked better for me, before I got a gas setup. Make sure ground is good too. ;)

[@ThePaintPaperHustle]

Thanks buddy. Flux core I can weld so much better than in gas. I’ll have to try the e thing I’ve never heard of that

[@funfun8095]

@@ThePaintPaperHustle Those welds didn't look like gas welds. What are you using? What CFH? I use straight CO2 and 20 CFH, with trigger pulled. What size wire?

[@ThePaintPaperHustle]

Co2 and 15ish with trigger pulled. I’ll try bumping up to 20. And yea they look like a dog took a dump

[@ThePaintPaperHustle]

Full disclosure I’m not the best at cleaning the metal as I absolutely hate the prep to welding. So I tend to say “I’ll burn through it”

[@funfun8095]

@@ThePaintPaperHustle lol What size wire and how close are you keeping the tip to the puddle?

[@andrew_brent]

What size wire are you running in your welder? .030?

[@ThePaintPaperHustle]

I think currently .30

[@andrew_brent]

@@ThePaintPaperHustle 120v machines have a low duty cycle, usually 20% or less, they can't burn .030 efficiently, next time you buy wire try .025 and the tips to match. You'll have to change your heat and wire speed settings a little but I think you'll be happy 👍

[@ThePaintPaperHustle]

@andrewshuford mines 220v

[@andrew_brent]

@@ThePaintPaperHustle oh ok, lol forget everything I said 🤣

[@LoneWrencher]

my son didn't like me notching my bumper,he wanted to make a drop mount for the tag instead

[@ThePaintPaperHustle]

Yea mine was so low that it wouldn’t look right. It’s bugged me for along time.

[@jamesbarger730]

Where's ur safety glasses? Lol

[@ThePaintPaperHustle]

Talking about when I was cutting the fiberglass bumper? I normally always wear them

[@justonrandall6304]

Why Don’t you just kidding

[@ThePaintPaperHustle]

Lol why don’t I what