RaceDynamics Fuel X Lite | KTM Adventure 390 | Installation Guide | Product Support | Experience

[@dadge2500]

This actually is the best video I’ve seen about the 390 coming out of India. Thank you I really appreciate you taking the time speaking in an understandable way again thank you.

[@ChakraRidingBeyond]

Thank you for taking time to share what you feel about the video. Makes me want to make more such videos to help the community. 🫰🏻

[@blackdiamond_7659]

Cheers for the video, I over complicated in my mind when I looked at the harness but that was easy af

[@ChakraRidingBeyond]

It's true. The wiring can look very intimidating out of the box. 😅

[@marksvideochannel3592]

Thank you for the video, it has helped me a lot withmy install. Mark in New Zealand.

[@ChakraRidingBeyond]

I'm glad this helped. Love from India. 🫰🏻

[@andreasjermak4663]

Great Video! Thanks .

[@ChakraRidingBeyond]

Thank you so much 😇

[@virajvrooms]

Thanks, man. Bumped into your video. I have installed FuelX lite on my 2022 KTM 390 ADV. However, haven't noticed any difference. I haven't got any errors, and the LEDs on the unit seem to be working fine. I will be waiting for your test videos. Basically, improvement in low-end torque and quick shifts.

[@ChakraRidingBeyond]

Glad I could help. No further errors anymore now. It used to come with the old unit. And yes, the difference is not much now as compared to earlier.

[@virajvrooms]

@@ChakraRidingBeyond Hmm. Thanks. I guess I will need to use the Duke's sprocket to improve the low-end torque then. Didn't want to mess with stock hardware but seems there is no alternative.

[@ChakraRidingBeyond]

You can use the 14T front sprocket from Adv 250. That makes a lot of difference.

[@virajvrooms]

@@ChakraRidingBeyond Noted

[@arunbabu6524]

i bought the newly lunched fuel x pro plus which is claimed to have increase torque by 25% on par throttle. I tested the product extensively and i found no difference in performance. Without fuel-x , fuel-x mode 1, fuel-x mode 3, fuel-x mode 8 and fuel-x mode 10 . Has same idling RPM. Same speed at 4k RPM at 1st,2nd and 3rd gear. Same speed and similar knocking issue (at identical rpm) on no-throttle at 1st, 2nd and 3rd gear. I contacted the support team and as per them fuel-x is working fine but they are unable to explain why i am not seeing performance difference. Is fuel-x really making a difference on closed loop. Is it just an illusion ?. I cannot find a video on youtube where influencers technically comparing with fuel-x and without fuel-x.

[@gogia_amit]

Hi, I am watching your video, I am eager to know how does the fuel X lite change the performance of the bike. What are the benefits of installing it?

[@ChakraRidingBeyond]

Although there are several videos on this, I will still try to explain this in short. Until 4-5k RPM it modifies the lambda value that goes to the ECU. So the vehicle runs slightly richer on the lower RPM band. This in result eliminates the jerkiness, stalling issues and improves throttle response.

[@gogia_amit]

@@ChakraRidingBeyond how about the performance on the mileage?

[@ChakraRidingBeyond]

With the first gen Fuel X Lite, fuel efficiency dropped by 2 kmpl from stock. However with the replacement unit, which is the updated one, it has increased by 2 kmpl from stock.

[@chaahatkhan3395]

Brother may i know appne number plate uper kaise mount kiya hai i want to do the same on my bike

[@ChakraRidingBeyond]

Number plate upar lagane ka alag mount ata hai RR16 ka. Unke website mein aap ko mil jayga.

[@santhakumarr5200]

Is there any improvement in mileage brother?

[@ChakraRidingBeyond]

No. It is as usual.

[@abrezmirza453]

I am using fuel x lite .i dont think its worth .stock is good i believe.

[@ChakraRidingBeyond]

Yeah, it could be personal preference.