Rad Wagon & Burley Minnow

[@youtubechannelinfinite]

Do you have a link to the attachments you used to get the trailer connected?

[@adaly4649]

Could you please explain more about the way you attached the hitch to your RadWagon's back axle? We were recently gifted a used Burley Bee, but when I tried attaching the hitch to my 2019 RadWagon, I couldn't get the geometry to work out to actually attach the arm of the trailer. The running boards were getting in the way. Is yours underneath the running boards? Did you have to use any sort of adapter? You showed your setup briefly from the top but I couldn't figure it out from what was shown. Thanks for the help!

[@adaly4649]

Update since my last comment: I ended up removing the left running board and was able to get the angle of the arm correct, but the frame of the Radwagon angles too far down to let the pin go straight down into the hole. Until I can figure out a new method for attaching this hitch, it's just two kids per bike ride for me.

[@gravelbikepirate5986]

I ended up using a hack to get it to work. I got a CB antenna mount and used the bracket from that on the frame in the back.

[@adaly4649]

@@gravelbikepirate5986 Aha! So the mount is being used as a male/female extender of sorts, then. I could see that. I still don't think I'll be able to use the running board at the same time as the hitch given the geometry of my frame, since I think my Radwagon is one model older than yours. But it's still definitely worth a try. Thanks for the idea!

[@wakawaka1976]

How’s it going now? Still enjoying the bike? We are searching for the best cargo bike to buy. Blix, Radwagon, Flyer L885… lots of options

[@elizabethraworth64]

Thanks for this video. I am looking for a bike set up to use for large grocery hauls and taking my grandkids places. Granny is going carless !

[@ianarmstrong4226]

Nice to see a 3. The flat 4 is a bore. I love my regenerative breaks. I can get about 100 miles a charge riding in pas 1-2, and breaking all the way down our Berkeley hills. If you set the rear brake loose you can regenerate with out any pad contact. I also removed the throttle all together. A sharpie cap will fit the conector. You can ride harder without a wiggly throttle in your hand. I dig your rig. Maybe I’ll make a video one day.

[@msds1502]

Do you have a link to the antenna mount you used?

[@gravelbikepirate5986]

Similar to this but use at your own risk. IDK what the weight limit would be but it worked for me. a.co/d/9e5nq8b