RadioLink Using ID SEED to control 2 different car independently

[@todd5060]

This may be an older video but you just answered every question I had that brought me here. Thanks

[@TheTankRC]

I am glad this video could help you. Thank you for stopping by to leave a comment and to watch

[@TuxStang]

Thanks, you explain better than the manual, haven't really understood the aim of the ID Seed until now ... now it opens lots of possibilities ...

[@RichieMead]

Ooohhh my god this was the video I have been hunting for months for thank you a million!

[@TheTankRC]

@@RichieMead LOL, I am glad that it could help you out. Thanks for the comment.

[@sneakernshirt660]

you have answered my question on how to bind with multiple cars. thank you very much

[@Radiolink_official]

Thanks for ID SEED instructional video!!!

[@TheTankRC]

Tell me a problem, thanks for watching.

[@cloves.machado]

Excellent video, congratulations, the video is well explained.

[@TheTankRC]

Thanks for the kind words, and thanks for leaving your comment

[@AC-bl1rl]

Perfect, thank you!

[@mdd0204]

Amazing Vid , learned something new and so important and frustrating 2 years after owning this remote

[@johnskii]

This was very helpful, very well explained. Thank you!

[@TheTankRC]

I am glad it could help you. Thank you for leaving a great comment

[@zeeek1]

Tres bien merci!

[@TheTankRC]

@@zeeek1 pas de trouble, je suis content que ça t’a aidé

[@tbnice9999]

You are a life saver!

[@TheTankRC]

I am happy this help

[@tbnice9999]

@@TheTankRC I was struggling trying to separate the two

[@BlackSmithRC]

Great ID SEED instructional video brother!

[@marssien]

Exactly what I was looking for, thanks for the video. I was hopping to do that on my 3 RC since a recently get rid of crystal remote and convert to 2.4ghz remote, bought the RC4GS v2 with 3 receivers. Now I do not need to rebind and re adjust all setting all the time. Now got some set up to do. Thanks again.

[@aaronhouser3711]

Well Done

[@rcbustanut2057]

Thanks for taking the time to make this video! I have had this controller for ~2yrs & didn't know this lol. I have 4 cars that I control with it. But I never have more than 1 car with me, I never noticed this before. Now I need to see if this controller has the ability to control the steering such that when I begin to turn the wheels, it starts very slowly but as progress to turn the wheels, it starts to turn quicker.

[@DirtDobberRC]

AWESOME video man great job going through thise steps perfectly!! Cant wait to get my other RadioLink RC6GS v3 reciever.

[@Foochila]

That’s the video I needed 😮

[@TheTankRC]

I am glad that is useful to you thank you for watching and commenting

[@sofeygoree4263]

Man this really helped me out......THANKS👍🏽👍🏽

[@davidhazelden2054]

Grate n us full hint thanks m8👍👍

[@RcNickster709]

A HA.... That's how that works. I got 4 rigs and counting on mine. I was wondering how this works and this explained it well. Thank you Francois. For sharing. Thumbs up from me.. :)

[@RcNickster709]

Thanks again Francois. Forgot again.. 6 Rigs and counting

[@TheTankRC]

Lol 😂 Looks like your memory is just as good as mine

[@RcNickster709]

@@TheTankRC Yup pretty much.. LMAO

[@thatoneguy2756]

​​​@@TheTankRC if I have already setup 4 cars on the radio, without using the ID seed feature. Can I go back and turn ID seed on, rebind those 4 cars without losing any of the settings? Can I name the model in the ID seed so it matches name in Model list? Subscribed!

[@TheTankRC]

Yes you can assign a profile an ID seed at any time, no ID seed are only numbers and cannot be changed

[@allenpowell1702]

I need to rebind all my models now :)

[@larrydrouin2497]

thank you soooooooo much ,

[@pbednar]

great explanation, thans alot

[@AddyRCBuddy]

Great explained, it helped me a lot. Thanks for sharing! 😸✌️

[@raymondbennett2807]

Cheers mate very helpful vid saved me a lot of grey hair from the mannal.

[@ModModRc]

Maybe i missed something, whats the point in adding ID1 to model 1 & id2 to model 2? It looks just the same as binding 1 reciver to 1 channel These vids are helping me understand my controller i have the 6ch & Maybe able to do 4ws & switch to 2ws & crab without disabling as you did in other video

[@DirtDobberRC]

So cool! I have 2 crawlers one is a RedCat Everest 10 and the other one i built, its a 313mm crawler i habemt given her a name yet 😊. Im using the RadioLink RC6GS v3 for one crawler and the other crawler im using the redcat RCR-2CE transmitter and reciever. I have the reverse steering kit installed on my RedCat. I ordered the RadioLink RC6GS v3 transmitter qith dual antenna. In order to just use my Radiolink transmitter i just follow your steps?

[@DadLovesHelis]

Can you do this with the AT10II transmitter?

[@silverarrow7849]

Thanks for the video ! Very useful ! Quick question : did you try binding the same receiver to 2 Radiolink radios using the same Seed ID. Will that work ? I am thinking to buy a 2nd radiolink radio for my son and equip all my cars with Radiolink receivers. If it is possible to bind 2 radios to the same car, it will be useful as each one of us will have his radio with his settings and can choose any car to drive. Thanks !

[@TheTankRC]

I am not sure but I will try it, I do have two radios here. Once I do I will post the video, thanks for the question.

[@colincharles8737]

Can you assign a switch, so a quick flick from one car to the other?

[@TheTankRC]

no you cannot, you have to go into the menu select model and scroll to the model of your want.

[@yinghaotan5884]

Does flysky has similar Seed ID function?

[@davidhazelden2054]

Dos this only work on the radio link v2 not the v1 m8

[@RichieMead]

Does anyone know if its possible to have Steering endpoint adjustments tied to a switch where you had a max turn radius at physical stop then a short throw for precise handling on speed runs?

[@CommanderAstigRC]

Well.. easiest way would be just Turn On one car at a time. I don't understand why you would wanna leave one car ON while driving another car. I guess maybe for different situations?

[@getonitnow]

Because some might have a boat that's upside down, this way you could send out another boat to rescue it, without the motor going flat out on the upside down boat and such. Also if sailing more than one, you can leave one in the water still powered up while running another boat round

[@yinghaotan5884]

That's right, ID seed function is really good for more than boat. Any idea does flysky GT3C has ID seed function?

[@greerengineering]

ID seed is essentially the "modelmatch" feature that spektrum has. Without it, any bound receivers in any model would be controlled no matter which model was selected in the transmitter. With ID seed used, you can exclude all the other bound receivers and only control the specific one in the selected model.

[@jasonbrathwaite431]

Would this work for controlling two esc at the same time in duel motor build