Answers to 7 most common questions about the DumboRC DDF-350

[@hofsplace]

DumboRC DDF-350: ▶️ s.click.aliexpress.com/e/_EwC8MTL Review: 🎬 kzbin.info/www/bejne/p2TTk2Sne9N_aqs

[@shiraz18744]

Do you perhaps knows which is the K9 and k10 buttons on the remote, this happen after calibrating the button option i think

[@hofsplace]

​@@shiraz18744 the bottom two on the handle

[@aelohinjuz]

Finally after seeing so many videos about controllers, you really go into what matters! Great video! Yours should be top for the algorithm!

[@hofsplace]

Thanks

[@Vinz3ntR]

Can you program the 3 way button on the right side for max 25/50/100% throttle?

[@hofsplace]

No

[@nitrousoxide4341]

I need your help. I'm using this one in my trx4 bronco 21, a hobbywing and a led kit. When I drive forward, the car goes backward, so I invert the channel, and it's fixed, but now the reverse light turns on when I drive forward. Please help me out. Polarity and cables are fine already checked.

[@hofsplace]

Is the Hobbywing sensored?

[@farmoboy83]

Can i pair the transmitter with all my rc cars with dumbo system and it will save the sets of every single one? For example, the servo endpoints are different between my crawler and basher and every time i pass from one to the other i have to set everything againd with my dumbo mini trasmitter

[@hofsplace]

Yes, you have 10 individual cars you can set, look inside the menu, transmitter

[@farmoboy83]

@@hofsplace received the transmitter yesterday and its confirmed. I can even give a name to each rc car paired. Amazing!

[@hofsplace]

Great

[@dr_rotor]

Hi! Great video, thank you! Can you help me how to set up the failsafe on 360° servo? The problem is during long expeditions we have rests and sometimes my tx just switches off after 20 minutes (I know about the alarm) and it destroys my winch. Also one diff lock cannot hold the failsafe, too. Are there any limitations?

[@hofsplace]

A fail safe means that the servo goes into the 0 position. -90 | 0 | +90. Perhaps you can change the position of the servo horn and do some setting adjustments to solve it.

[@Thunderchops1984]

Regards the cruise control - I can get mode 2 to work, but I don’t understand how mode 1 works. Any ideas?

[@hofsplace]

I didn't try it myself

[@Kevin_Jones]

I have setup my end points for my crawler to the maximum setting, 120, however I need more than the limit. Do you know if there’s a way to get more out of it?

[@hofsplace]

Longer servo horn perhaps?

[@VDVC-RC]

Depending on the receiver, there is a way to get extended range from channel 1. I know that works on the X6F(G) receiver.

[@bobcathyper7797]

Hey! I do no prep drag racing and I was wondering if I can set up trans brake? Can you program a button as a brake? If you like hold the button and throttle it won’t move but as soon as you release that brake button it goes. Can it do something like that?

[@hofsplace]

Yes, that's possible. You can set the buttons to 'inching' instead of locking

[@bobcathyper7797]

@ ok awsome thank you!!

[@reprieverc]

Can you dedicate one of the dials for chan 5 or 6 for 4 wheel steering?

[@hofsplace]

Yes you can

[@EvdM_Just_For_Fun]

How do's the 4wheel steering setup work on with this and and can you setup 2 motor's with front or rear brake? Like in when you do crawling and would like the rear motor to brake/stop the rear wheels and only have the front wheels running or stop front and only let rear motor run.

[@hofsplace]

So extended like you mention is not possible. I did 4ws with an Y cable and reversed a servo

[@hofsplace]

kzbin.info/www/bejne/gmS6poh6ptefZrc

[@Ralf_F]

Big thanks for this video! Is it possible to get the voltage display with the newer P6FG receiver? It hat no 2pin connector.

[@hofsplace]

Hi, that's not possible

[@Ralf_F]

@hofsplace oh ok, thanks for your reply!🙋‍♂️ So only the X10 which comes with the DDF has this feature, all the newer receivers not?!?

[@vrnoobie3804]

hey i was wondering if i can put light directly to a DUMBORC X10FG like ona x6dc or if its an adapter to put lights on it directly

[@hofsplace]

It does not have dedicated connections. But you can plug it into the + - of a channel.

[@khairulhasif8640]

Hi bro is this remote can do mix channel? For example throttle with winch. For rc crawler

[@hofsplace]

Yes, that's possible

[@danperez7169]

I love this radio but am wondering if it can be set up with led lights that can be turned on/off with the channel buttons?

[@hofsplace]

Hi, yes, that's possible. I'm using light controllers in my cars and turn them on/off via the remote

[@danperez7169]

@hofsplace dammit. I can't figure it out. I bought some ebay lights and a switch that I was told I needed that plugs into the esc and lights. I just want on/off. Don't need fancy turn signals or anything. Would love to hear how to do.

[@hofsplace]

@@danperez7169 email me with that you bought: [e-mail]

[@macmccartney5760]

What about cycling threw light modes ​@@hofsplace

[@hofsplace]

​@@macmccartney5760that depends on what light module you're using. If it has multiple settings, set the dedicated CH to inching and you're all fine

[@andrepintoTechNewsAP]

Is it possible to use older dumbo rc receivers that have the connection to have light system?

[@hofsplace]

This question is answered in the video 😉. But yes, it's possible

[@TheDepep1]

Is there any way to set rear steer to work with the wheel?

[@hofsplace]

You have to use a Y cable on Ch1 of the receiver. Or set the rear steer to Ch7 on the remote.

[@TheDepep1]

@@hofsplaceThx

[@zoefke4585]

Hello, is the voltage measuring of the lipo battery in the car/boat accurate ? Some people say it’s not, did you check ? Is this receiver the same as the Absima R10WP so also water tight for using in a boat ? Thanks up front for tour feedback. Groet, Frank

[@hofsplace]

I didn't find any problem with it

[@ModModRc]

Can this transmitter connect to flysky fsgr3e reciver & control it? I have quite a few they are AFHDS

[@hofsplace]

No, it's their own protocol

[@Lespaul_84]

Is it possible to swap the steering wheel to the other side for left hand use?

[@hofsplace]

Not that I know

[@mancave.42]

Hi, does this model remember trim positions for all the different receivers?

[@hofsplace]

Yes

[@Boogie_the_cat]

5:08 thank you, this is exactly how i was hoping i could program the gyro sensitivity to an analog knob on the transmitter. It is SO much easier to turn a knob, than to go into menu, select option, adjust option.... That is too slow! Very helpful video. I hit "like" button to help your channel.

[@hofsplace]

Thanks!

[@twenty4665]

Thanks for the video, great information. I have the MJX hyper Go 16301, how do I assign a channel to the lights so I can turn them on/off because they are always on when connected to the DDF-350. Thank you in advance.

[@hofsplace]

You'll need a separate light control board, something like this: s.click.aliexpress.com/e/_EIYTBQn

[@joshb4715]

can you charge the lipo with the built in usb-c port?

[@hofsplace]

I thought it would, but I prefer to use my separate balance charger

[@superfabian143]

Hello thanks for the video, can you please compare the dumbo ddf350 to the Radiolink radio link rc6gs? i can't decide and I noticed you have the radio link too. Tbh i really like the looks if the dumbo more, way more modern but is it as goof in the other departments ? ;)

[@hofsplace]

I'll rather take the Dumbo. I just don't like the menu and the bulky design of the RadioLink

[@rcman.6]

How do you set the endpoints in the Dual rate ??

[@hofsplace]

It's the same in this remote

[@rcman.6]

@hofsplace yes

[@runerally1]

can you turn expo off on this radio with a switch or do you have to go into the menu

[@hofsplace]

You have to go in the menu

[@The-bashing-zone]

Hi. Which receiver support the voltage return? Only the X10F?

[@hofsplace]

Yes

[@brianschultz3812]

The x6fp does also. 20 on amazon

[@esdtattz]

How do you set up channel mixing for incremental 4wheel steering on this radio?

[@hofsplace]

You should use a Y cable and a reversed servo in the rear. Or reverse the servo yourself: kzbin.info/www/bejne/gmS6poh6ptefZrc

[@esdtattz]

@@hofsplace thank you for the help and for the video I’ll definitely be doing this

[@JohnDoe-tj6vy]

what's the best way to set up 4 wheel steer with this ddf350. I wish channel 7 would between between in and outer teering while being in the center position is normal

[@hofsplace]

Perhaps diy for ch7? Or a Y cable on CH1,

[@stationx100]

Hey good video thanks. Another question, can i bind more cars and save it?

[@hofsplace]

Yes. Up to 10. Check the remote menu

[@Enword_Jim]

Is there a way to make the screen turn off when you're not using the menus and such? I like these transmitters with the screens and all the options but it seems like having a screen on all the time is going to kill battery life.

[@hofsplace]

Go to: Transmitter settings, page 3/5. Here you can set the display light and sounds

[@mic3k86]

I've just ordered it but I have a question, maybe you will be able to help ;) In HB Toys R1011 (Jeep Rubicon) there are separate slots for LEDs front/rear/left indicators/right indicators/one free 2 pin slot. As i remember all of them are connected into CH3. Do you think it they will work correctly? LED bar is set as a separate connector under CH5.

[@hofsplace]

Hi, I dont have that specific car anymore, but aren't the light all connected into the receiver with white connectors? If yes, than you have to be creative with separate light boards or something

[@aabidaslam9936]

Will a 3s 100c battery work?

[@hofsplace]

​@@aabidaslam9936 Yes

[@Daytona89]

How do I have to position the receiver so that the gyro works? Or can you set it up somehow so that the receiver knows how it was positioned in the car.

[@hofsplace]

Hi. Contacts needs to point backwards. Press the little button 3x to activate the gyro. Press it 1x to change left/right

[@Daytona89]

@@hofsplace Perfect thanks.

[@rafalciezak1240]

Can I connect the red lights and set them to come on when I brake? I ordered Dumbo DDF350 X10FG, I have the lights installed and I wonder if I will be able to connect them like this or just turn them on and off using the button

[@hofsplace]

That depends on the light module you're going to use. Some have this option, other not. You can use a switch on the RX, set it into 'inching'

[@kastellorizon]

@hofsplace Thanks a lot for the video. I have question related to the batteries. Have you seen an option to turn off the screen or dim it? Thanks in advance

[@hofsplace]

No, there no option for that

[@user-fm5qg5if5v]

Yes, there are options for this. Go to Transmitter Settings, then scroll to the third page to get to the Backlight options. I have my screen set to turn off after 3 mins of inactivity, and my screen is dimmed to 50%.

[@kastellorizon]

Thanks a lot!! ​@@user-fm5qg5if5v

[@stevenkendall548]

Great video…one question what is PPM on the receiver used for

[@hofsplace]

Not sure, it's a communication signal, but I don't know the thought about it to add it like that

[@diejinto]

Hi Friend whats the cable called that goes in the b- and b+ mine did not come with the cable. Thnq

[@hofsplace]

You can use a JST connector or 2 pins of a servo plug

[@MickaelGresset]

Hi, do you think it's compatible with Turbo Racing 1/76 cars ? Thank you.

[@hofsplace]

Never tried it

[@InTheDogHouse3DPrinting]

I just set up one of these on one of my crawlers, and afterward I went into the settings for throttle and brake calibration. I did a calibration and now my steering is on full left lock and the green led on the left side is lit up and at will not turn off. I reset the remote and it is still it up, what do I need to do to fix it? I even removed the batteries for a couple of days and it still isn't working. Please let me know. Thank you. Also after watching your video I don't have the advanced menu option on mine.

[@hofsplace]

Difficult one. Try to update the firmware. There is a Chinese video somewhere

[@InTheDogHouse3DPrinting]

@@hofsplace I will give that a try, thanks for the response back.

[@darrow187]

Hello, do you know if its possible to set CH5 or CH6 to work as "TH D/R" knob in stock wltoys remote controller ? (Foremost max speed) I can set it thru General menu -> END Point -> Throttle But its not convinient...

[@hofsplace]

Hi, there's no standard way to do that. Perhaps you can try to use the mix settings?

[@DiDoria]

Hi there, how do I pair this remote with my Syncro krg-331? It doesn't seem to work. Thanks

[@hofsplace]

Don't think it will sync, different protocols

[@mikehuff7321]

How do you change the steering dual rate

[@hofsplace]

Somehow there's no dual rate, only the end-points and sup-trim. The end-points can probably be used for the dual rate

[@YOOPDLRC]

I just ordered this product and the detailed explanation is really good. 👍👍👍

[@hvflyaround8438]

The B+B- the two wires that show your battery voltage. My question is does that function only work on 2s & 3s? 4s ? some people say yes other say no and burn the rx, could you please confirm? Thanks

[@hofsplace]

Yes, 2S and 3S. Tested myself

[@hvflyaround8438]

​@@hofsplaceyes in the video I see. The question is more the 4s...

[@hofsplace]

​@@hvflyaround8438 don't know. I didn't find any spec.

[@savagebashing7190]

I want to use 2 servos for my steering and they have to work in opposite directions. Can I do this with this transmitter?

[@hofsplace]

Use an Y cable from the receiver to both servo's and reverse one of the servo's. In this video I'll explain how to reverse a servo: kzbin.info/www/bejne/foK4pIduaZh6lcU

[@Mr316jon316]

Can you pair multiple receivers? I can’t seem to pair multiple. In fact it won’t let me pair anything other than the factory one

[@hofsplace]

Yes you can. Under the remote settings you can select different models. The models correspond to the receiver's and settings

[@FullAutoRapidFire]

Hey, great video. 1 question tho. How do I change my transmitter battery status from voltage to percentage like you have. Mine displays voltage instead of percentage.

[@hofsplace]

The percentage is for the battery of the Transmitter. In the top right corner you'll find the TX battery voltage

[@zolota40]

Greetings if you can help how to replace it on the remote, for me it shows volts in jest percentages thank you

[@Mambomel]

Sorry newbie here recently rekindle my RC hobby again and want to upgrade my controller. Does this bind with the stock RTR receivers like Mini-Z 4x4 and the WPL RTR? Meaning I do not have to change the receiver on my RTR.

[@hofsplace]

You have to change receivers as well. DumboRC also makes a 2in1, ESC/Receiver combo. This can be useful for those cars: s.click.aliexpress.com/e/_ExJRp6Z

[@Mambomel]

@@hofsplaceThank you for the feedback. Seems like Nobleky NB4 might be more suited for me than if im on the Kyosho Mini Z platform without the need to change receivers.

[@smoheissp50pro11]

Hello, i have the firmware v1.1.1. Since the 1.0.9, there is a new functionality : the cruise control. Did you try it? There is two mode : mode 1 and mode 2 but i don't know what's the difference between the two. In fact, i want to limit the speed as you can in a car. For example, in my car, you have the speed limiter for not exceed the speed limitation and you have the 'block' system. I just wanna limit to 20% of the speed, for example. Do you know how to achieve that?

[@hofsplace]

I've got old firmware as I was one of the first to have it, so I'm not able to test it

[@smoheissp50pro11]

@@hofsplace hello. I got an old firmware too. But i upgraded it by following a video on youtube. It was in Chinese but the trick is to activate the subtitles and choose English for the subs. I upgrade first to 1.0.9 and to 1.1.1 after that.

[@hofsplace]

​​@@smoheissp50pro11I have to watch that video as well and upgrade the firmware

[@allandiaz6845]

Can this rc transmitter use two different models at the same time?

[@hofsplace]

As far as I know, no

[@bramakk9125]

Wy wy only the the 6 chanels resiever have the light cabel. And not the 10 chanel resiever. And how can i used the 10 chanel resiever with the light cabel.

[@hofsplace]

Hi, there isn't space anymore on the receiver, I think therefore it hasn't. But check out this: s.click.aliexpress.com/e/_EHkFiQ9

[@nordicbeast]

Is there any benefit of running a 3s over a 2s?

[@hofsplace]

No

[@nordicbeast]

@hofsplace thank you. Just convenience ?

[@shiraz18744]

How to I reset to factory I messed up with settings and the steering light blinks on way, and no steering at all, also trying to figure which is the k9 and k10 button to reset

[@hofsplace]

Did you check app pages in the menu?

[@shiraz18744]

I checked nothing , still playing with the remote trying

[@AminbizznessRC]

Hi. Can I switch steering trim to channel 5 or 6? If so u mind helping me? Thanks in advance

[@hofsplace]

Changing the trim to another button/switch is not possible

[@AminbizznessRC]

@@hofsplace thank you.

[@familyrc777]

It is possible now. You can set steering trim to channel 6. I have gyro 5 and steering 6.

[@stefanoprota9858]

Hi, I need to ask you a question. Is it possible to change the speed of the motor (limit it if it is used by an inexperienced person)? I can set the steering trim

[@hofsplace]

Hi, in the Menu, page 3, you can set the end-point of the throttle.

[@MKequilibrium]

@@hofsplace do you know how to set eg. 50/75/100% throttle on the CH7 button which has 3 positions?

[@hofsplace]

​@@MKequilibrium not that I know of

[@eugynmylow702]

Can it adjust the gain of all channel

[@hofsplace]

No gain adjustment, only end-points, reverse and dual rate

[@johngoodfellow168]

Very usefull video, thank you. I was baffled by the black and red cable in the box, but now I know what it's for.

How can I limit the servo range? cant find it anywhere

[@hofsplace]

Menu, page 3, steering end points

@@hofsplace but it’s global for all the models. So it’s not possible to set it up per model

[@hofsplace]

Not sure if I understand you correctly. But you have the option to use up to 10 different models with all different, unique settings

[@ryu5201]

thanks for making the video and keep up the good work. I have a question regarding powering the controller. is it ok to power it with a powerbank? iI use a powerbank to power my DumboX6 controller and wondering if its alright, it seems to work but do I have to change the power to something else, the only options are AA 2s and 3S?

[@hofsplace]

Sorry, don't know

[@Strob_74]

Have you tested Radiolink reciever with this controller? Dumborc and Radiolink recievers seems to have the same name except the first letter that is X on Dumborc and R on Radiolink, both are FHSS

[@hofsplace]

I tried to bind a 4ch RL to the DDF350, doesn't work

[@stevenbhagwandat2828]

Hello, great video! How does the audio interface work?

[@hofsplace]

What do you mean?

[@lanfir3]

Do you know i can use it on my pc as a controller?

[@hofsplace]

Never tried myself

[@NorthcountyRCs]

Ima kinda confused I wanna be able to open the throttle trim with a nob? While im running a nitro.

[@hofsplace]

That's not possible. Or you have to mix CH2 & CH5, then you can throttle up with CH5. But trimming is pretty easy and can be done on the home screen

[@familyrc777]

You can set the Dial 5 or 6 to do steering trim. I just learned how today. I have mine set up , gyro on nob 5 and steering on nob 6.

[@NorthcountyRCs]

@@familyrc777 broooo make a short how you did it!!!!!

[@familyrc777]

@@NorthcountyRCs I will. Sub , I’ll try to get a video up soon.

[@Latimerias_trailncrawl]

Let's say i bring 2 trucks, and i want to move them like truck A first and then change to truck B with same transmitter? Is it doable with DDF?

[@hofsplace]

Yes, you can easily select between models

[@Latimerias_trailncrawl]

@@hofsplace need to turn off the switch to change or you can change it while both of them switch turned on?

[@hofsplace]

​@@Latimerias_trailncrawl when it's on

[@JordiTudóVidal]

Muy buen video. Son compatibles los receptores de radioling? Ya que es el mismo fabricante Dumborc, gracias

[@hofsplace]

I'm not sure. If i have time, I'll test it

[@hofsplace]

Hi, I tested to bind a RadioLink receiver, but it doesn't work.

[@JordiTudóVidal]

perfecto muy buen trabajo @@hofsplace

[@서혜린-k5q]

Do you know how to limit maximum speed by adjusting ch.5 or 6? or other switches? seems impossible.

[@hofsplace]

That's not possible

[@brucegreen1016]

hello, I was wondering if you can give me a helping hand, I bought the DDF-350 and can not get my winch to hook up properly, I have a warn winch with two wires red/black. As soon as I plug it into the channel 3 port, the winch automatically winds in without touching anything and won't stop until I unplug the winch from the receiver. What do I need to make the winch work properly with the controller and receiver.

[@hofsplace]

Hi, you have to have a winch controller in between the RX and winch. This is like a mini esc: s.click.aliexpress.com/e/_Ewf1O39

[@brucegreen1016]

@@hofsplace Great thanks for replaying, I order that ch3 winch controller, I had the wireless remote set-up for lights and winch before buying the DDF-350 w/10ch, thanks again

[@SvkFill]

Great video but you forgot to mention Gyro reverse. I have the same 10CH receiver and i manual is written to click twice quickly onto binding button to reverse. If I do that it starts to blink red continuously but gyro not reversed. Still didn't find how to do it. 😢

[@hofsplace]

Not sure, but isn't it 3 times?

[@SvkFill]

@@hofsplaceactually no, I found it in some chinese video. It is 1 click on left (mode) button to reverse gyro. 👍🏼

[@hofsplace]

​@@SvkFill great 👍🏼

[@escmark]

Is there lock function where its locks everything where u can stop by hv a chat with friends without worrying the remote triggering the rig to dash away

[@hofsplace]

As far as I know, not. But you can turn the transmitter off... These days the receivers should have a fail safe 😉

[@nic.25]

There is a padlock icon in bottom right of screen but I think it's just to lock screen input and not trigger.

[@hofsplace]

​@@nic.25 that to lock and unlock the throttle and steering trim

[@francoismuller9735]

Thank you for the useful video! Do you know if it is possible to use a mix CH1 > CH3 with some expo or specific curve (only on the CH1>CH3, not CH1>CH1) ? (the goal is to use a sound engine on channel 3, and properly matching the sound reaction to the car - It really improves the realism!)

[@hofsplace]

Hi, in the mix mode menu, you can mix every channel with each other. So it should be possible

[@francoismuller9735]

@@hofsplace You're right, mixes are here - but do you know if it would be possible to apply a different curve on each? (it seems at least possible to specify a custom curve on throttle, and a linear curve on the mix CH1 to CHx - if the throttle curve is not applied here too!)

[@hofsplace]

​@@francoismuller9735 hi, it's not possible to make separate curves

[@saqib8033]

Hi I have a arrma infraction how do I set up the Handbrake Module on this remote with a receiver

[@hofsplace]

​@@saqib8033 hi, use CH8/9/10 and set it to 'inching', not in 'locking'

[@roseykr]

Very informative. If using a 2S lipo, does the DDF-350 charge it via USB-C?

[@hofsplace]

Didn't try that

[@Boogie_the_cat]

USB C is only for "trainer mode" as far as I know.

[@brianschultz3812]

No because it does not use the balance port

[@farhanfaiz1998]

It's for 2s li ion

[@EricsRC]

What 3s battery do i order?

[@hofsplace]

These will work: s.click.aliexpress.com/e/_EyGrJsz

[@Sambeau-tn5kj]

Do you know how to set a throttle limit on this transmitter? Even better if you can use channel 7 selector to switch between oreset limits.

[@hofsplace]

Perhaps you can use the trottle curve, or maybe the mix mode. But i didn't test it yet

[@user-fm5qg5if5v]

You can currently only set the throttle limit using the Throttle End Point option, but you'll have to play with the throttle trim to minimize the throttle/trigger delay.

[@bentravis99]

@@user-fm5qg5if5v why do you say this? Are you saying that adjusting the throttle end points somehow adds throttle delay/latency?

[@user-fm5qg5if5v]

This was my experience, but your choice of ESC may change the outcome.

[@bentravis99]

@@user-fm5qg5if5v that is bad news. How much latency did it add? Clearly a noticeable amount, but was it really bad when driving? What receiver were you using? thank you!

[@DiDoria]

How's the latency with this controller?

[@hofsplace]

Didn't find any issues

[@DiDoria]

@@hofsplace thanks for replying. Just gone one let's see!

[@Kris5ik]

Hi! How can I bind it?

[@hofsplace]

Make sure your transmitter is in the correct profile, you have 10 for different cars, and turn it off. Press the bind button until it flashes, turn on the transmitter, it should bind then. Try to steer a couple times to check

[@lexxanplay]

Please tell me, I bought DDF-350 equipment, how can I make the car first brake and then drive back? I connected the light module, and I don't like how the brake lights work, they turn on in reverse. Can I make the car brake and then go backwards when I press it again?

[@hofsplace]

The brake option needs to be set in the ESC. The light module, if it's an advanced one it responds only when the throttle sticks is pushed backwards the first time, braking. The second one to reverse the car it shouldn't turn on.

[@lexxanplay]

@@hofsplace Yes, this is what happens in my light module: the first press of the trigger turns on the brake lights, and the second press the reverse lamp. But at the same time, the car itself only goes forward and backward, without an intermediate brake. It could be the speed controller itself.

[@hofsplace]

​@@lexxanplaywhat ESC do you have?

[@lexxanplay]

@@hofsplace I have esc "surpass hobby 35A"

[@hofsplace]

​@@lexxanplay doesn't it have a little jumper that you can move so you can set it to Forward/Reverse or Forward/Brake/Reverse?

[@InTheDogHouse3DPrinting]

I have a question for you, where do I plug the power wire into the receiver to power it on a gas powered r/c?

[@hofsplace]

Just in one of the channels +/-

[@bigpythons1983]

Hi buddy, how do I set my dual rate and steering trim to channel 5 and 6 on the side of the transmitter?

[@hofsplace]

Hi, go to the general menu, page 3 is end-points/trim

[@bigpythons1983]

@@hofsplace yeah I got that buddy, I want to assign channel 5 and 6 to dual rates and steering trim, I need to be able to adjust them quickly without stopping and going into the settings and I’m planning on using this for indoor Rc racing

[@hofsplace]

​@@bigpythons1983 that's not possible. But you can adjust the trim from the home screen with the scroll wheel

[@bigpythons1983]

@@hofsplace that’s a real shame I’m gonna have to buy another transmitter, the old non digital dumbo transmitter can do it, that’s really disappointing the ddf 350 can’t do something that is so commonly used

[@are_rulez84]

finallyyyy.....im searching for the detailed explanation......tqqqqqqq for this great video...great explanation n all details.. ✌️

[@snuzum06]

Very helpful video, answered a lot of my questions but how do you use the transmitter with multiple models and receivers? It looks as tho it has model memory so you don't lose specific settings for separate models but I don't know how to use it.

[@hofsplace]

Hi, go to 'transmitter settings', the first page is for setting different models, up to 10 different ones

[@lowtus7]

Does it have ABS braking?

[@hofsplace]

No. But perhaps you can set it in your ESC?

[@lowtus7]

@@hofsplace Thanks for your reply. Unfortunately my esc isn't that flash. It's a shame they didn't include that functionality. Maybe in a future update, who knows.

[@dennisbrouwer4193]

I bought this one and ordered the wireless coach module at the same time! My question is were is the wireless coach module good for what does it do?? Alvast Bedankt!!

[@hofsplace]

Hi, ik heb de coach nooit gebruikt, dus zou het niet weten

[@dennisbrouwer4193]

@@hofsplace Jammer er zit namelijk geen beschrijving bij dus ga verder zoeken dan maar!

[@hofsplace]

​@@dennisbrouwer4193 succes 🤘🏻

[@Boogie_the_cat]

8 believe wireless coach module is so you can have a more experienced person with a second transmitter that is also bound to your RC, so that if you lose control through inexperience, the second transmitter person can take control and remove your RC from the dangerous situation. I hope this translates correctly.

[@NorthcountyRCs]

Can I put this in nitro rcs?

[@hofsplace]

Yes

[@BossEditX73]

You said that a version of the remote cane with the cable to check the voltage with the remote. Which one is it? Then I can see the same remote but for lower price as 50. Is it legit? Amazing video thanks a lot!

[@hofsplace]

Hi, there is a connection on the 10ch receiver, up right, B+B-. Just connect a lead from the battery into here all you will have telemetry on the TX. Note, up to 3S

[@FM-oi3me]

Can you really only connect a single pair of LEDs to the X10FG? That's a bit small, to say the least, isn't it? That's not even enough for the front light and rear light 🧐 I don't want additional switches. I also need all the other slots/channels. Couldn't I connect a total of 8 LEDs with 3 Y-cables (4x at the front (white) and 4x at the back (red) and then switch them on and off? That would be enough for me. Or is one slot on the receiver overloaded? Unfortunately I don't know anything about electricity, that's why I'm asking...

[@hofsplace]

Yes, this receiver is not built to take lights as there is no more space. I recommend to use the FZD: s.click.aliexpress.com/e/_ExPmMYB

how can i connect the winch? 🙏🏻

[@hofsplace]

Hi, you have to have a winch controller in between the RX and winch. This is like a mini esc: s.click.aliexpress.com/e/_Ewf1O39

@@hofsplace thanks. And you know to tell me how it connect? 🙈

[@hofsplace]

One lead goes onto the receiver, the other to the winch connector

[@MillyAire]

Here’s a quick question to test you 😂 The radio link rc6gs, can you clone one to another so it’s an EXACT copy and can be used as a back up?

[@hofsplace]

Not as I know off

[@deanmurphy-brown4452]

Has anyone else got the problem of the steering trim jumping one way or another if it's not pretty much in the dead centre when you start to adjust it? Mine does that and it can be a pain! Epic radio otherwise. Wouldn't mind being able to adjust the steering dual rate quickly without moving end points though and i can't find a way to do that currently.

[@hofsplace]

Hi, sorry, I'm not familiar with that issue. Try to update the firmware

[@deanmurphy-brown4452]

@@hofsplace I'll have a look on the internet and see what I can do 🙂

[@DaddyDaughterRC-sw2zb]

I am having the same issue as when trying to calibrate steering it locks steering to right, then steering stops working

[@deanmurphy-brown4452]

​@@DaddyDaughterRC-sw2zb I've ended up leaving that adjustment well alone. What I've done now is used channel mixing in the model menu to make channel 5 an adjustment for the steering. Then I've set the end point to 15% on said channel to give me a decent macro adjustment. Haven't touched the actual adjustment in a while now.

[@DaddyDaughterRC-sw2zb]

@@deanmurphy-brown4452 good call 🤙. I also had a long play and found as steering was reversed on ours it somehow plays havoc with adjusting steering as calibration only like to calibrate for factory settings. Once steering direction was sorted it was a bit easier but still is not great so agree to leave calibration alone which is a shame and needs to fixed in software update.

[@DaftPunkerOG]

Is 3S the maximum number of cells for return voltage? I can't get my x10fg receiver to read a 4S battery 👎

[@hofsplace]

As far as I know, max 3S

[@DaftPunkerOG]

@hofsplace thanks. That is a bit disappointing. I'm just going to connect it across one cell and just get a reading for that cell. My batteries discharge pretty evenly so it shouldn't be a problem.

[@familyrc777]

What’s the benefit of running 4s over 3s over 2s? Does it give you more range?

[@hofsplace]

​@@familyrc777 hi, they are talking about the telemetry function. This means that the battery voltage of the car is shown in the display.

[@familyrc777]

@@hofsplace ah I see. Okay. My bad. Thanks for the clarification

[@alankowalski8781]

Can you run 4WS on that?

[@hofsplace]

Yes, you can use an Y cable on CH1, or use the 3 position switch

[@Gaming_with_rage]

Als je 2 lipo's heb kun je ze dan ook allebei uilezen?

[@hofsplace]

Nee, er is maar een aansluit mogelijkheid op de ontvanger, dus voor een accu

[@Gaming_with_rage]

@@hofsplace En als je hem net zo aan zou sluiten als je lipo’s van radio naar balans kabel doorlussen naar de andere zo terug naar de radio…?

[@hofsplace]

​@@Gaming_with_rage als je in serie bedoeld, dan geeft hij het totale voltage door. Maar ik weet niet precies tot hoeveel V je kan gebruiken. 3s ja, 4s weet ik niet

[@Gaming_with_rage]

@@hofsplace klopt inderdaad in serie.... misschien zou de radio dat niet aan kunnen want er staat 12 volt op.. en ik rij 6s en dat is 22 volt... misschien een vraag om bij dumborc neer te leggen of dat mogelijk is. Maar dat zou wel super tof zijn.

[@hofsplace]

​@@Gaming_with_rage helaas heb ik geen contact met DumboRC

[@justinw523]

You are missing one other very important question, light function for the X10F/X10F(G) with the DDF-350???

[@hofsplace]

There are no dedicated connections, you'll need this: s.click.aliexpress.com/e/_EI2WJcp

[@kiroslabtsipgreg3992]

Thanks for your great useful answers+++

[@benbryant4611]

Will that it work on 4s

[@hofsplace]

No. Only 2s and 3s

[@Jimbobdro]

Are you talking about the B+B- two wires that show your trucks battery percentage? or the receiver it self?

[@benbryant4611]

I was

[@hofsplace]

​@@Jimbobdro yes. Not sure if it will take 4s

[@diejinto]

Hi friend where can o find the option to drive at full speed

[@hofsplace]

Hi, do you mean dual rate? If yes, you can use the trim function

[@labahlabahoren]

What about mixing, control two servo

[@hofsplace]

There is mix mode in the menu

[@bestdrinkchannel8671]

How to set 4ws, thx

[@hofsplace]

Use an Y cable on CH1. One of the servo's needs to be reversed

[@KarTka]

How to set it up and is it failsafe?

[@hofsplace]

Yes, is has a failsave. What would you like to set up?

[@KarTka]

@@hofsplace When I turn off the remote control, the winch starts to wind the rope, which can lead to it breaking, the winch is connected to the 3-position channel

[@hofsplace]

​​@@KarTka A fail safe means that the servo goes into the 0 position. -90 | 0 | +90. Perhaps you can change the some settings to solve it.

[@Boogie_the_cat]

Thank you. I ordered this a few days ago. I had the similar Rlaarlo CT8A for 75 days and it broke already. I opened it up and nothing is wrong with the potentiometer, but the damn thing inputs -1200 to the throttle channel as soon as i turn it on. Complete trash which Rlaarlo has no interest in honoring warranty. Never had a issue with the DumboRC X6, but i got the 350 so I don't have to re set the trim and dual rates and endpoints when i switch from Kagama to Felony. DumboRC have the most reliable budget transmitters, with best range too.

[@hofsplace]

Agreed!