RadioMaster Boxer 4(5)Ch Fixed Wing model set up with “Safe” Throttle

[@stephenwalker3127]

It works, it works 😀 Thanks Bill the throttle cut works a treat.

[@pwhan12345678]

Thanks very much Bill for some very informative videos.

[@joeheuvelman9918]

Thanks for the video. My boxer just arrived today and I was a bit overwhelmed with all the options and screens. This video helped me tremendously

[@nickmoloney9820]

Thank you , I shall have to watch this more than once and probably at .75 speed to match my old brain but I already know this is a massive help. Thank you so much.

[@the-happy-RC-flyer]

I know that feeling Nick 😂

[@gwoonryan8665]

Thank you so much for this video!

[@MammothPaige]

You are the best, I just bought my Boxer and I'm enjoying it with your help Thank You

[@keithhuckle6175]

Hi Bill problem sorted out, I had THt instead of THs. Cheers, keep up the good info.

[@nevTk-oe9ud]

Cheers mate got mine today an u helped so much I usually use spektrum , I managed make new model bind to mini volentex warbirds but have trobs with setting 3 way switch’s for modes

[@the-happy-RC-flyer]

You are very welcome. Check out this video it may help you. kzbin.info/www/bejne/ppvOp2aOqNNpeKssi=ZB8cUurwqyVhe55C

[@keithhuckle6175]

Your videos are a great help, Thanks Keith in OZ. Looking foeward to the cricket tonight.

[@the-happy-RC-flyer]

You are very welcome Keith. Yes your chaps keeping the Ashes this time.

[@cannonjanes994]

Hi Bill - great videos! Can you create a video on how to set up AS3x and Safe Select on a Spectrum receiver? I have the AS3x working on my older 1.2m P51, but I cant figure out how to set up safe select. The receiver is a AR636A

[@BlazingFPV]

I second this but for a Boxer remote with Edge TX

[@alexherrera3918]

Very useful tutorial, you got me as a new subscriber. Thanks.

[@josephwatson1036]

AWESOME!!!!!!!!!

[@keithhuckle6175]

Morning Bill, have set up safe as your video. The timer keeps timing out while the THS is at minimum.

[@the-happy-RC-flyer]

Hi Keith, check the Logical Switches and use the logical switch to operate the time not a physical switch. It will be the second line of the logical switch settings for the safe throttle. Now you time will only operate armed and throttle is forward.

[@scuba47]

This was great, thanks

[@s__s_6242]

thank you soooooooooo much this is a real life saver.

[@zeilstar]

For my L02 configuration on a RM Pocket, I inverted the value of SA because of preference. I do have an unrelated issue with the channel 5 servo on a BetaFPV Micro RX. The servo only seems to register on or off and at center stick it sort of bounces back and forth.

[@the-happy-RC-flyer]

My first question for you is what radio link are you using? If ExpressLRS you must only use Channel 5 for arming.

[@zeilstar]

@@the-happy-RC-flyer yeah, it is ELRS. It was my understanding this rx could be configured for 5ch PWM. It seems to show ch5 as PWM in the config webpage. I'm very new to all of this and I'll stumble my way though it. I just want two aileron channels for flaperons :) The mix configuration for safe arming you have here is very good though, I appreciate the time put into this content.

[@the-happy-RC-flyer]

If you have more than 5 channel receivers use a different channel for the mix.

[@zeilstar]

I just recently bought the 5ch rx but it was only $13. BETAFPV website shows it as supporting all 5ch as PWM so I'll do some more research .

[@the-happy-RC-flyer]

@@zeilstaryou can remap the channels and change the settings but the resolution will be a lot lower.

[@samhitchman7166]

very good videos thanks switch a doesn't seem to be there it goes straight to switch 1 what have i got wrong ?

[@the-happy-RC-flyer]

Hi Sam, it’s difficult for me to analysis your problem without seeing your radio. All I can suggest is to check your settings as per my video. If the safe throttle is not working make sure you check you have selected throttle stick and not throttle input in logical switch 1

[@keithhuckle6175]

Hi Bill, am trying to control nose Wheel & Rudder Independently using gear switch so the nose wheel operates when gear is down using rudder, when retracted it does not operate. Cheers Keith in OZ

[@the-happy-RC-flyer]

Hi Keith, you need to set up the retract function to its own mix / channel. Now set up a mix with source Rudder and Switch which operates the retract. This is connected to the nose wheel steering servo. I hope this helps.

[@GrahamMoody-ll3kn]

Bill, I've been working my way through your excellent videos for a model with a 2 servo wing and electric power. I was going to use S2 as the safe throttle switch but have somehow removed S2 from the options presented when allocating a switch on the Boxer screen, and the title 'S2' is not there when i view the switches on EdgeTx companion. As my knowledge of these things is rather limited could you tell me what i need to do to fix the problem. Many thanks.

[@the-happy-RC-flyer]

Hi Graham, hit the SYS button go down to Pots you should see S1, S2 & S3 check that S1 & S2 show Pot w det hopefully this will solve your problem.

[@GrahamMoody-ll3kn]

Apologies Bill, i should have said switch 'SB', maybe someone will bring out a set of videos for Dummies 🥴

[@the-happy-RC-flyer]

@@GrahamMoody-ll3kn No problem Graham. Go to Hardware scroll to switches and check SB shows 3POS

[@jaymccaffrey7463]

Hi Bill, thanks for the beginners guide to the Boxer galaxy.... Does your throttle cut setup matter if you setup your xmitter in Mode 1 or Mode 2?

[@the-happy-RC-flyer]

You should set a safe throttle in either Mode 1 or Mode 2.

[@BlazingFPV]

Hi Bill, I am new to RC planes and recently purchased a EFlite Turbo Timber Evolution to learn the hobby. Curious…do you have a video that explains how to set up a 6+ channel RC Plane using a Boxer TX?

[@the-happy-RC-flyer]

This video should help you. What do you particularly need extra help with and I will try to assist you.

[@BlazingFPV]

Thanks for the reply Bill! I am trying to setup my Turbo Timber Evolution and want to make sure I am setting up the Flaps and LED lights correctly. I am also interested in setting up dual rates and would to know how to setup Safe Select and AS3x modes. I believe I can configure with my boxer remote through forward programming. Also, I’d like to setup Telemetry. I’m familiar with my boxer for FPV drones not RC Planes. Not sure if I should setup these modes through Inputs or Mixers?

[@the-happy-RC-flyer]

You need to use mixes.

[@EBPlusC200]

Bill, im building a Wing plane and it will be using FC with INav, my question is do i need to keep the ADC FILTER on or off? TIA

[@the-happy-RC-flyer]

Hi, off if your FC is controlling the servos.

[@EBPlusC200]

@@the-happy-RC-flyer I have the boxer radio and i wanted to use the 6 buttons above the screen. How can i turn on and off the same button?

[@the-happy-RC-flyer]

Hi Edgardo, what is it you want to control with the let’s say the first button? In other words how does the servo or channel move full throw -100 to +100 or Center to -100 or +100?

[@EBPlusC200]

@@the-happy-RC-flyer I want to set up Nav modes in INAV, Center to -100 or +100. If you can give me a sample set up of full throw -100 to +100 also.

[@the-happy-RC-flyer]

Just use the standard default mix and assign the switch you want to use. No need to make any adjustments with a 3 position switch.

[@foloeel]

You don't tell us how to add second aileron Chanel

[@the-happy-RC-flyer]

Highlight the aileron channel and copy it. Move to Ch 5 and paste. Normally you will need to reverse the weight to -100 so the aileron moves in the correct direction.

[@foloeel]

​@@the-happy-RC-flyerThanks

[@sawekkaniecki8336]

I think that you don't need to use curve, Simple replace value should do.

[@the-happy-RC-flyer]

Hi there, you do need the curve for the safe throttle to work.

[@davidlee50]

When is a good time to insert the SD card?

[@the-happy-RC-flyer]

Hi David, I normally power off the radio when removing or inserting the SDCard.

[@jgrc73]

no matter how many thumbs down KZbin still sends me to these , I just want the REAL tutorials, why are these at top of all lists with only a couple thousand view each, are you paying for placement????i wouldnt care if i could make these videos go away but that is not an option. so insanely frustrating.

[@the-happy-RC-flyer]

Honestly I have no control over KZbin. If you unsubscribe will you not get them? Just do not watch my videos if they are not of interest to you.

[@the-happy-RC-flyer]

Sorry cannot help you because I do not have any Spektrum equipment to be able to record a video for you.