Radiomaster MT12 Launch control setup

[@RCUnboxer]

Nice video my friend ❤♥❤❤🚜🚜🚜🚜 A very creative idea ❤❤♥❤🚜🚜🚜🚜 I look forward to seeing your designs. Congratulations on your journey forward 💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯💯

[@se-rc-uk]

Thanks so much for the positive response and the support

[@RichardLRussell85]

Next day service. You got my subscription. Thanks for the video

[@se-rc-uk]

Pleasure mate, hope it helps

[@randallhughes5687]

So I found an issue while messing around with this. If you go into the mixer monitor when the launch control is not activated the travel on the throttle goes past 100, I noticed this with my X-maxx and the throttle was much more sensitve after doing this. The problem i found is the second mix. It is adding to the channel output when launch control is not enabled resulting in a loss of about haof of tnrottle resolution as half throttle is now full throttle. The second mix is adding a value to the output when the launch control is not enabled. Simple fix is drop the weight of the second mix to 0.

[@hughjanus5518]

Thank you

[@se-rc-uk]

Hope it helped you 👍

[@wasa7]

Mines set up slightly different. A stitch together of several bits of info. I might try and use yours to add the toggle switch function. I fancy having a 20% limit for bringing it back. I set mine to 4 seconds, that was lively 😂

[@se-rc-uk]

I bet it was 😂👍

[@wasa7]

@@se-rc-uk I normally bring it in pretty hard kzbin.info/www/bejne/rJW4gn59gJ6GraMsi=54D9YIrV8BSA9Ity