RadioMaster TX16S is here. Jumper T16 is done.

[@bobwhite3707]

Thank you. I am looking forward to your T18 review.

[@SimonCrowther1]

Yeah, same here. Radio broke a few weeks ago and can't hold out to long :(

[@nathanwalton4555]

Just got my TX16S a couple of days ago and I love it. Already committed to crossfire so seems like a no brainer (cheaper than T18). Thanks as ever for a great and honest review Joshua.

[@amin0_acid310]

2 years later the MKII comes out, I saved and picked up the MKI HALL edition. I'm moving up from a Jumper T-Lite v2, which I still use for inside whooping and is in a completely different range. With the saved money I used some to get an ELRS module. Super happy, this info helped me pull the trigger after also looking at the MKII vids to see the difference. Always happy to watch old and new JB vids when I'm looking for an honest and good review. Cheers!

[@mieroptimus]

I started with the FPV hobby back on January, learning to fly with the Taranis X9 Lite and the Lift Off simulator races (so it is funny to see this house as a course map), and a couple months later (amid all that's happening) I got my first quad for training yesterday! I got a Mobula 6 with the FatShark Recon V3. I went to the park today and I was actually able to fly it around and go with the trees and all. It was fun to see other people stopping by to watch. Just wanted to say thanks for your channel, learning a lot from it. (Also I'm from GA, if there are any events nearby I'd really like to check them out).

[@originellsterbenutzername6757]

Ooooh always those reminders about the affiliate links in the description. PEOPLE, listen: if you're here, this guy probably helped you A LOT to get into this amazing hobby, and you've had A LOT of fun (instead of trouble) thanks to him, so just go to his freaking website, get his affiliate links for all the vendors, put them into the Favorites List of your browser and just use them for every purchase. Let's make him filthy rich (or at least a little bit closer to that), he deserves it.

[@mosesm.3431]

I second that! Poor dude is doing sooooooo much work for us!

[@MikkoRantalainen]

I'll take affiliate links over ads within the video every time.

[@graywoulf]

I agree and just bought this radio using his link. 😊

[@neonoir__]

Exactly, shame i can't ever use most of them since eu shipping costs are ridiculous

[@MikkoRantalainen]

@@neonoir__ most stores have high shipping costs, too, but BangGood has been cheap this far.

[@larrybryans500]

Loving mine and no problems. 3 models installed and so far so good.

[@raygibbins]

Great review as always. I got the Jumper T16 last November and have lost count how many times I have had to reseat the ribbon cables. If only this radio was out last year. 👍

[@52griz]

Very good no nonsense unbiased video. Looking forward to your T18 report as I'm leaning toward that one. Nice country setting. Had you pegged in a NYC apartment.

[@bonafidepirate]

I don't know if I'm that somebody you mentioned @14:40 but if not, count that as two radios received with the right slider not working due to a broken wire at the solder joint... lol Quick repair, working good after. I'll have some video up soon.

[@SimonCrowther1]

Cant wait for the Jumper T18 review and you're view of which to get up against the RadioMaster TX16. I have both in the basket for the last 3 days waiting for the review. (my radio packed in a few weeks back). Thanks for the great channel. Watched so much this last month.

[@OverdriveTech]

I got my TX16S today and I love it! It's so freaking good.

[@FlyturboKwad]

Well I hope it doesn't cause you diarrhea

[@OverdriveTech]

@@FlyturboKwad Why should it?

[@douglasreinecke7453]

@@OverdriveTech I'm guessing from eating it 🤷‍♂️ 😂

[@WrongWayFPV]

Waiting on mine to be delivered today as well.. I'm excited 😁

[@Tintin-dm4ym]

How did you get it already? I thought it’s still on preorder?

[@trigatupp]

Starting this hobby best advice was to get good radio. When I started it was Mr Steel X9D no cros. This was my 1st loved it, then frisky X lite no aceess. Use $20 R-xsr in fport in all my builds with DJI and few analog still working. Never range issue or build quality, still very solid. Also only use internal antenna. Sold my X9D before getting into digital. Ty as you as well helped me back then!

[@willy_the_coon1940]

Thanks for paving my way into a Hobby I was too scared to approach for too long. Ordered them, looking forward to following your great Simulator Tutorials!

[@abghostrider7960]

I have the Jumper T16 Pro and works great. I cant get a new radio every couple of months like you Joshua. I had a Spektrum Dx6 for many years but wanted something that did all protocols and along came Jumper had an 8sg, too small upgraded to T16 pro, changed to carbon face plate, awesome radio does all my planes and quads, added TBS Crossfire even better, Gimballs are very precise as well.

[@mitchellroberts7954]

I've had no issues with my T16 so far. I trust it on long range flights miles out. However, if the TX16S proves to be reliable (ribbon cables aren't the only issue that arises in transmitters people...) then I will be switching eventually.

[@tasoschalkidis7772]

I had preordered the radiomaster in late January...Covid-19 was around the corner so... things got delayed...like a lot... So I asked for a refund, used all my coupons and points from banggood since I had a lot of them (gotta have spare screws and props 🤣) and got myself an X9D plus SE for around 220€. I love this radio to this day and has no issues with my crossfire at all. Build quality is top of the line and the battery lasts forever because there is no giant lcd display to drain it.

[@DavidReynolds-kr6yh]

Tasos Chalkidis , you did know that you can make it turn the screen off after a set time didn’t you?

[@DavidReynolds-kr6yh]

And also you can adjust the brightness of the screen, which can be seen out in the sun.

[@tasoschalkidis7772]

@@DavidReynolds-kr6yh That's cool, I didn't know that. But still, I was so frustrated that they didn't ship the radio for so long and I couldn't fly so I bought something that was already released because I couldn't wait any longer.

[@tasoschalkidis7772]

@@DavidReynolds-kr6yh I was only gonna use crossfire anyways so the multi protocol module didn't seem that interesting to me.

[@DavidReynolds-kr6yh]

Tasos Chalkidis , I’ve got a crossfire module and a few things that run it, bought a jumper t16 but I stuffed up some settings after updating it, been trying to go back in the updates to no avail, so I decided to get the radiomaster and make sure I wait for a couple of weeks after the update comes out before I do update it, so, even though I’ve got the crossfire the full power unit and some receivers, I’m also going to get an R9 unit and some receivers because they are so much cheaper and do a similar thing.

[@CarbonGlassMan]

Crazy. That radio was $130 less than 2 years ago. I just bought one for $199 which is the standard price now.

[@jamesceastep8874]

Joshua: As usual, your review was very thorough and covered some details and testing not done elsewhere, which I appreciate. I did not hear any comments about the color monitor. I'm concerned, and some reviewers commented, that this color monitor may get washed out when used in direct sunlight. Please give us your opinion. I think this could be a show stopper. Enjoyed time with you when you visited Duke. Jim

[@umeshjadhav3326]

Very few videos out there, that shows comparison of jumper and radiomaster currebtly.... Great work... Always to the point

[@leelewington3588]

Still learning for you every day, thank you.

[@shearfury147]

i love my tx16s. just learning to fly and it is nice, i have the newest version raised page and return buttons and lower profile sticks i use it on my 5 inch build and my tiny whoop, its really nice. at the end of the day your flying and the radiomaster helps deliver that experience..

[@dfowlfpv7909]

Definitely getting this or the Jumper T18. I really don't care for my Qx7. I'll wait patiently for your review. Thanks, JB!

[@WrongWayFPV]

Literally waiting on my radimaster to be delivered right now lol.. should be here in about an hour.. I'm pretty excited about this radio.

[@rijal71469]

How is it working? I'm trying out on DLR simulator. Can't wait to get mine. How long did you wait? I ordered mine on June 1st from banggood.

[@WrongWayFPV]

@@rijal71469 I ordered mine back in March. So I waited a long time lol.. So far, I'm loving it!! Definitely takes some getting used to the Hall gimbals. So much smoother than my taranis x9d.

[@Green2theC]

Bought this radio last night...Excited to finally start investing into this hobby!

[@PowerThumb]

Please do a "How to switch from T16 to T16S" (Splash Screen, Sounds, Models, Rates, .... ) video.

[@mishmacs7193]

kzbin.info/www/bejne/eJu4mWSKq9Zll7s 👍 I hope this helps buddy

[@h2o-fpv623]

for now i stay with my jumper t16 its been really good to fly my drones . good video

[@switchflip9550]

I already preordered mine so excited!

[@DavidReynolds-kr6yh]

SWITCHFliP , 4 days to go and mine should be on the way, I’m excited too.

[@davidchillton1744]

Got my jumper t16 a while ago, still loving everything about it, should be good till the screen stops working, but even then you can just get a replacement

[@jimwilson946]

Great to hear a reply from someone who actually owns one. I love mine as well and have had none of the supposed problems so far.

[@johnnytech0309]

Been using my t16 v2 for 6 months now, havent had any issues with it

[@michaelcallahan2149]

Really happy with the upgrade coming from a really old x9d. For the price I think its worth the risk but I would have no problem repairing it myself. Mine showed up in perfect condition though.

[@dash8465]

I went the other way from the X9d... Tango 2 pro... simple, small, great gimbals, built-in Crossfire, long lasting battery, excellent antenna setup, solid company. We fly quads... I dont need or want a big fat tx that's a pita to pack, especially since adding dji's much larger HD goggles. And if I want to fly a multi-engine gasser with retracts I still have the X9d/Crossfire and its 2 watts.

[@cpfpv6410]

just ordered mine through your affiliate link with a bunch of new receivers, FPV cams, and flight batteries so you should have gotten a little of that. lol. thanks for all you do!!

[@spodfpv5930]

Hi Joshua, thanks for the review! I received my radio on Tuesday and haven’t had any problems yet. However, I have see some people complaining that the digitiser on the touch screen leaves a weird square pattern. I don’t know how they’re radios have come or if you’ve run into the same problem, but I found that there’s a very stiff screen protector that is actually tucked around the edges of the display. I removed that and the screen is perfect now with no touch sensitivity lost (I checked in the calibrator sections).

[@TheNightfireify]

My shipped yesterday! Super hyped

[@jimsnodgrass8454]

Joshua, Nice video Thank you.. I just received my TX16S yesterday and haven't flown with it but just wanted to mention there were no issues with stuck buttons or anything bad with mine.. The left and right sliders are a little loose but unless you bump one.. it's not going anywhere and the center detent ( along with the ON Screen display VERY clearly show the position of each) I did NOT expect to get the Touch screen functionality in the display but it IS there in the $120 Banggood version I got with the Hall Effect gimbals.. I just wish there was a place like P400 and P401 inside to to add-in the SJ and SJ switches I added into my Q-7XS radios cause I really like having momentary push buttons under the index finger to trigger voice announcements of ( I have 6 diggerent ) telemetery parameters on demand .. I'm going to update both of these older Q-7S radios to 2.3.7 1st then transfer their D16 and ASSAN models to the Radiomaster and set up the TX16S for wireless training .. Really hoping is goes smoothly and am looking forward to more videos on the TX16 soonest.. Thanks Again.. JimS

[@FerralVideo]

My Jumper T16 has started developing ribbon cable problems. I was able to repair most of them, but the RS slider connector broke while I was trying to fix it. I don't NEED the sliders in my current RC habit, but I may want it back another day, so I'm putting my finger on the pulse of the market by watching these reviews in case I decide it's time to upgrade. That said, I JUST got to the part where Jumper is offering upgraded cables, and I'm probably going to spring for that. I also will want to order a new connector/mux board because I broke that connector, but hey, I admit that that one's my fault, and I'll pay for the repair.

[@LapinFou14]

Great review!!! RSSI is not %, it is dB! -6dB = double the distance. This is why it doesn't decrease lineary. 🙂 The RM TX16 will be supported by OTX 2.3.8

[@Dem0nwarrior17]

Thank you so much for doing a range test I've been waiting for someone to do it!

[@theAbstruseJuice]

Thank you for the very honest and open review.

[@TheJoker6789]

Already bought it. Should be here later this week. Definitely seems to have more capabilities than I will ever completely utilize. A little anxious to try out a better radio than the fifty dollar one I have been using.

[@dronepilot260rc]

Thanks for this video. I almost lost my drone flying my Flysky I6 radio. I'm going to buy this radio soon

[@firemanx202000]

Same happened to me today with the same transmitter

[@ahj1849]

Your videos keep me on my feet with with quads so thank you. I was really debating on this controller as my new controller. Cuz the turning evolution is way outdated

[@mceduardik8251]

Thanks for your review, been really waiting for it)

[@johnpavlic]

I loved the fact i bought a x9d plus se 2019 and bought crossfire for it and OH YEAH, the xjt module to work with d8 protocol! I get to change out modules. Booyah!

[@ShadowOppsRC]

Sweet! Thanks for the good review! Love my Taranis for my drones but a lot of eflite rc planes only come bind and fly.

[@luikjis]

Thanks Josh, I learn from you every day, peace

[@MCsCreations]

Great review, Joshua! Thanks a lot! 😊 Stay safe there with your family! 🖖😊

[@caradu9973]

Joshua you're the only one in the crew that hasn't gone batshit crazy with their facial hair it's nice to see someone remained sane

[@sebmad6817]

You convinced me i just ordered it instantly for 103€ using my Bangood points 😎 Hope the delivery will be fast

[@JoshuaBardwell]

Welllllllll I hate to tell you this but shipping from Asia right now is pretty slow. Good luck.

[@sebmad6817]

@@JoshuaBardwell I know well unfortunately. I ordered a few parts at the start of confinement, they just arrived in France I might have them next week🤞🏼 Unfortunately the shipping costs from the USA are waaay too high!!!! 🥺

[@dodo3441]

I ordered march 30th , still waiting :P

[@sebmad6817]

I'm ok to wait 6 or 8 week if needed... When you buy in China it is the price to pay.

[@dodo3441]

@@sebmad6817 ive seen people that ordered months after I did get theirs shipped within days while mine was still processing. seems like the shipping order is completely random. Hope you have more luck

[@melvinfinner4606]

Purchased this the other day on Amazon and paid $300 with all the bells and whistles (team blacksheep module, Hall gimbles) and so I can get it sooner than a month. Orserd the external charger and the original radiomaster 5000mAH battery. I spent between $400-$500 for it all and I just got it to use with my tinyhawk 2 freestyle and the velocidrone simulator. Smh, crazy I know but I didn't wanna wait a month to get it just to save $50.

[@jankerzone]

same here, mine was arrived yesterday and im very excited

[@BlazedFPV]

There it is!! Looks like an awesome radio man!

[@DavidReynolds-kr6yh]

I’ve got mine on preorder and looking forward to getting it in my hands. Yes the jumper t18 might be better again, but it’s also more expensive than the radiomaster tx16s, which is important to me, as I’m not exactly rich lol. I’m sure that I’m going to be happy with my purchase and if it does need one of those minor glitches repaired, I’m willing to accept that for the otherwise great quality that this brings to the table. Also with the new t18, how do you fit an aerial that will be compatible with the r9 setup, do you have to drill another hole in the body of the case, and do you actually have a place to fit the connection to the r9 antenna.

[@delta9vdp]

I'll wait for your review of the t18 (pro) for my final decision. My x9d died on me yesterday (oke, kinda murdered her by dropping her from a little to high) and I really dislike the path chosen by Taranis. Slapped an fs-ia6 in one of my beaters and found my first radio (fs-i6) in the shed. Gimbals are pretty worn but she still gets the job (me getting my fix) done.

[@muttbone01]

"Oh cool, check out that Lamborghini's taillights!" "Hmmm...that looks like we can make some buttons!"

[@richardpowellTV]

Don't forget, ground range is always less than air range. Nice House Joshua!!

[@elijahr6261]

I just ordered mine a few days ago.

[@DavidReynolds-kr6yh]

E Rieger , as did I, looking forward to getting it in my hands.

[@iamkarlpablo]

I've had issues with the TX16S internal RF module's range, getting 20-30% lower RSSI than the patch antenna on my X-Lite. I replaced it with a uFL-SMA adapter + VAS 2.4GHz antenna and it improved a LOT, plus my antenna is now removable.

[@parkflyerindonesia]

Thanks Joshua for the review. I was about to get Jumper, but got my eyes on Flysky Paladin. Ended with doubts in getting any of them. But this seems to be better choice to replace my Flysky i10 and stays along side my Futaba 10J, as it binds with AFHDS 2A and FHSS.

[@JustJackStuff]

i got my t16 and im loving it i had to shield the back plate to use a dragonlink TX but after doing it its the coolest LR setup ever :) wish i waited for a bit to get this with a touch screen :/ new stuff comes too fast man

[@DanTheCrow]

Man , the place you live is heaven.

[@Matt-fl2vr]

great review as always Bardwell, cheers mate

[@hakanyazicicom]

I purchased it on banggood along with Crossfire. Greetings from Turkey :)

The charge was slow because of the way balancers work. The battery is charged first without any balancing until one of the cells reaches 4.2 volts then that cell is slowly discharged by the balancer for a while, then the whole pack is charged again until the cell is 4.2 again. And that cycle is repeated until the whole pack is charged. So by putting one charged and one discharged cell you created the worst case scenario. In fact if you used your regular lipo charged I bet it would take equally as long, unless you bumped up the current way up of course. Anyways. I preordered the radiomaster and I'm getting rid of my old x9d ;)

[@spokaneman8750]

I’m dying here. I’m new to the hobby and was all set to pull the trigger on the Tango 2 and go full Crossfire since long(ish) range is my ultimate goal. Then the TX16S comes out with the Crossfire mod installed for just about $40 more than the Tango 2. I feel like the proverbial deer in the headlights. I love the compact form of the Tango 2 (and maybe add a LiteRadio 2 for my Tinyhawk and other FRSKY drones I might add) especially since I dream of lugging a cinematic quad when I hike and backpack. But the versatility of the TX16S is tempting. Help a newbie out!

[@JoshuaBardwell]

Rumors are that Tango 2 is goiing to get a 2.4 GHz module so you may not have to compromise.

[@e2346437]

My pre-order just shipped. I think the touchscreen is going to be a killer feature that will lead to onboard maps.

[@srossi88]

I think the one thing that HAS to be said is we also don't know how radio master will perform as a company. Jumper has already shown that they listen to feedback, respond quickly, and support their products with options to buy individual upgrades that may have been added to later revisions. We'll have to see if radio master acts similarly.

[@thomaswormsley8942]

Great review. I see how it may be easier to compare signal strength using trees to quickly reduce the strength, but I would really like to see a comparison with a clear LOS. Just a thought.

[@JoshuaBardwell]

The problem is that you need 5+ km of clear LOS to do that and I just don't know how I would accomplish that. There's nowhere on land here with 5 km of flat ground. And if I were to fly a quad out to 5 km there would be FAA implications.

[@johncarold]

Hay Josh Great video of the T16, and if I was starting in this Hobby it would probably have to be one of the best deals. Back when I started my first radio was a 4 channel FM radio and I paid around a $150 for it back in the early 70s. Thanks again for the information.

[@BBFPV]

U R old 😂 What was der radio?

[@johncarold]

It was a Kraft 4channel FM Radio

[@wakkaflakkadown]

Big BOOST FPV Ur a-hole

[@licensetodrive9930]

My T16's not dead yet, just this week I upgraded it to have the internal multi module (that was fun, learning that I had to re-flash OpenTX to make it work...) and the carbon fibre-look faceplate which makes it's appearance so much nicer. I opted not to install the USB charging board since IMHO it's not good enough, if one cell somehow gets discharged more than the other, the charger will over-charge the other cell, *it* *does* *not* *balance* *charge* *them* *properly* . Going to install an MT30 socket on it (it's a 3-pin XT30) and make a custom cable so I can charge the cells with my iSDT Q6 multiple times faster than USB.

[@theUAPwhisperer]

Can I follow you on that? I'd like to mod my radio too to make it as efficient as possible given its current shell body.

[@licensetodrive9930]

@Tony Dean Sure thing, I ordered the MT30 connector sets 4 days ago, no international posting so they should arrive very soon. The trickiest part will be deciding where to mount the MT30 socket, the obvious place is in the back of the transmitter but that means it'll be tethered to the battery connector board.

[@KiraundWanda]

I bought a Jumper T8SG Plus and had same serious issues. I contact Jumper via email and facebook, several times, i never received an answer. If radiomaster offers only a little bit of service, there are way ahead!

[@jameslawrence8050]

Thanks for this useful review... however the conclusion is « wait and see », if I am not mistaken... I am sticking with my x9d SE which works fine for the moment (especially with Crsf)

[@joelyfpv7075]

I love my Tx16s 🎉 With crossfire module… awesomeness lol

[@BBFPV]

Mine arrived today, you can't compare it to Futaba Graupner or Jeti but I like it, better than most FrSky and is better than a DX6, comparable to a DX9. And there is CF at an R9 price.

[@rotormasher]

The DX9 is way better quality build, I have both. Saying that it's a nice radio with a large colour screen etc

[@datac1816]

Just wish you would have compared the radio to the current Jumper t16 radios that are being sold like the lipo options and the known fixes. No doubt that the jumper t18 will have more to offer like the touch screen and another band and other refinements. That being said for those looking for a bargain the now obsolete jumper t16 should be available at a considerable discount and is still a great radio. Keep doing the great videos and the little tike was a blast in the other video.

[@JoshuaBardwell]

I pretty much did compare it to current T16. What did you think was missing? The internal charging that doesn't balance and overheats? Hall effect gimbals?

[@datac1816]

@@JoshuaBardwell mine came with 3000 mah lipo bat and balances right and doesn't overheat. It also has the builtin module and was ready to go. I bought 3-1/2 mo ago and didn't need any upgrades. I just notice that you were talking about the earlier pre sale version and to fair for those now looking into getting a bargain imo it's a pretty solid radio. Cheers...

[@partyfrog69]

Jumper is about to release a Jumper t20, apparently comes with a case, screwdrivers, solder, flux and 6 (roller wheels).

[@evFPV]

lol

[@henvan8737]

Yes in 3 months the T22 with all new everthing that still doesnt work properly

[@Sixthflyer]

hen van in 6 months is us election and then nobody cares tx toys anymore

[@sonarfleet2375]

What beautiful place. Do you live there or just rest in weekend ? What the best, radiomaster TX16S or Jumper T18? Congratulation your channel is a reference in drones.

[@americanlawdawg3609]

Dude wtf! I'm more impressed with that log cabin/barn style house, sick as fack 👍🏻 thanks for the review 🇺🇸

[@eneasrainey8213]

Just an observation, tx antenna vertical, quad antenna horizontal. I like your channel

[@caspervanbeek1220]

Hello, I am a fan of your KZbin channel. Already seen several videos about the rc transmitter Radiomaster TX16s. But now I have a question about the binding of a small drone of which I do not know the 2.4 protocol. How can I find out or how can the bond be established? Kind regards, Casper van Beek

[@jarrettharrington8510]

Sir thank u so much for your time and expertise

[@koressdavid]

Love your vids Joshua. Keep it up!👍🔥

[@DavidslvPT]

I'm not sure if this is an issue because I'm new to all this radio controllers (literally just received the TX16S yesterday), the radio seems very good (at least for someone who never had one, it seems right), the downfall of the radio is the documentation, the manual is somehow helpful but doesn't tell you things properly, if it wasn't for videos on youtube and some written articles on the internet I think I would still be figuring it all out. Also did the typical mistake of thinking the USB entry at the top would be the charging one. The manual doesn't even point out to the charging port, no indications of what it means having the green light on (I wasn't sure if it was thinking the batteries where fully charged). I've now got it to work with the Playstation 4 as I'm going to be spending a lot of time practicing on the simulator before attempting flying any drone. Things to keep in mind for me: - Better documentation - Remember the SD Card should be formatted in FAT32 (in osx is the MS-DOS option in the Disk Utility) - Remember that PS4 is also FAT32 compatible (exFAT is better but Radio doesn't support it) - Boot-load mode is T4 pushed to the right, T1 pushed to the left and then press Power - Have your own micro SD card to upload files into as the one that came with my radio was too slow and was causing data issues in the beginning - Calibration mode is really weird at first but all you should be focusing is the 2 sticks, then S1 and S2 and LS and RS (on the top edges of the controller), on the bottom middle of the screen theres also a number 1, those are the numbers under the logo RADIOMASTER (press them all when calibrating) - Calibration mode again, 1st action step is to centre everything, the 2nd action step is to go through the minimum and max range of each item) - If you have throttle warning when you turn on the radio go to SYS > PAGE > RADIO SETUP > Scroll left with the wheel > Press the wheel > Rotate wheel to right to select Mode 2 > Press the wheel again to enter value - If you have controls warning, the default of the radio is to have all levers pointed up. I think this kinda summarised everything I've gone through yesterday.

[@kevinfitch8656]

I contacted Jumper for new cables yesterday after seeing your video, They responded very quickly and said no. It would take to long and suggested it would be easier if I buy them from the dealer.

[@JoshuaBardwell]

Well I'm just going to keep saying they are replacing them for free and after a while either they will say no and people will get pissed or they will give in.

[@bomberaustychunksbruv4119]

Yup - as soon as in stock I'm ordering one.

[@jorgeromero4680]

i already have the T16 and holds pretty steady for me, i don't think i should get bothered to upgrade it.

[@Varian_t]

Wow the place you went for the range teat is looks like somewhere in Kerala..🌿🌱🌳🌴

[@nbike]

Thanks for sharing this info I order mine yesterday in bangood 💪

[@lorenzopiottoli6608]

Now we know for sure that the light goes off when the fridge door closes

[@_M_a_r_t_i_n_M]

Myth: *Confirmed*

[@charleswhite7134]

Hey!, REALLY? ...It does!!

[@robgeraats874]

Would IT be possible tot use a video receiver with this radio master to get fpv footage on this screen ...would be the holy grail! Love this kind of ways to make something like this possible. Best Regards Rob Geraats

[@elijahr6261]

I doubt it. That would be hekkin cool though

[@pippifpv]

Great idea. Would be soooo cool 😎

[@dodo3441]

I think it has extra uart ports, or maybe you could input video from a video receiver into the external module bay.

[@robgeraats874]

@joshua , please make this happen;)

[@burned_esc]

there some HARDWARE CHANGES to the 3rd batch of radiomaster t16s (got mine just a few days ago hallsensor version) the protective film on the touch screen doesn't have a grid pattern on it that so many thought to be the touch screen pattern, there's a larger louder speaker installed in the back cover not in the back of the grid in front so two halves are now connected by two cables, probably important info for anybody opening the radio for the first time and the project box is replaced with a simple flat plastic cover and you get extra screen protector in the box.

[@romangerasimov3523]

Im own the Jumper T16 and you know what I will say .... All these new equipment are even superfluous for beginners or mid-level pilots, if there is equipment, why change it? The main thing to every TX today... to support TBS crossfire and openTX (yappu maps etc) - it’s really cool.

[@ramus9]

The signal strength you’re actually seeing on the display is actually the telemetry data and not the actual RF link signal. The telemetry signal strength is way weaker than the actual RF link. I know this because I’ve lost telemetry data a distance while still having control of the aircraft.

[@mrfourtysevenman]

Me and a friend tested it on a small variety of receivers in airplanes. It worked good however we suffered a radio loss on frsky x8r while flying a timber x. Flysky and futaba receivers so far worked great. I'll try futaba and spektrum and provide an update

[@harshvardhangupte]

Any updates on this? Did you try fine-tuning it?

[@mrfourtysevenman]

@@harshvardhangupte we did not actually. That's probably what happened however I was getting hits with the frisky module on my radio

[@adrianhawley4909]

Great review as always Josh I only fly helicopters. Are you able to put details in your reviews about different types of aircraft as I find the open Tx is a nightmare for us heli guys. I sold my Jumper 18 because of it. It would be nice to know if the radios are capable of other aircraft other than just drones! Keep up the great work and stay safe

[@JoshuaBardwell]

To use OpenTX with Heli you want to flash the firmware. But turn off the "noheli" option. This will include a page of options specifically for helicopters like swash plate and other stuff I don't remember.

[@adrianhawley4909]

@@JoshuaBardwell thanks Josh as ever you are the font of all information

[@BtownFlyer]

I had both a stuck job wheel and model button. Was able to open it up and get everything moving.

[@SBWings]

I got my RM TX16S. OpenTX updates are available via the OpenTX Nightlys. When 2.3.8 goes live in the near future, we'll update using the normal methods. When you go to the downloads page on the Radiomaster website, the firmware link just takes you to the OpenTX website. Please note that that Tx16S is not running OpenTX v2.3.7. It is running a nightly version of 2.3.8. If you download Conpanion 2.3.7, the TX16S is not even listed on the drop-down list. I downloaded one of the 2.3.8 nightly Companion versions. The TX16S is on that drop-down list. I was able to backup my TX16S. Of course, this all goes away when 2.3.8 goes live.

[@parker1ray]

I realize it is purely subjective, but I have a Jumper T12 and I love the small size due to the fact that I can reach all controls with no reach and it is compact and easy to handle!

[@Bill-NM]

Thanks Joshua...two questions. What is the power output in 900mhz mode, and what about ACCESS compatibility? - - - wait a minute, I think I'm confused with the Jumper T18...yeesh...lots of radio these days.

[@iam.miikey]

Waiting for T16XXxs when it gets released next year! I heard the volume goes up to Eleven! Lol

[@TecHsia]

this week comes to me, hopefully good 😍