Radium Blackout

A brief look at a completed build.
If you can find the small problem with this build you will receive a free Protium DDC Mod Kit! The winner will be selected and contacted privately.
Please Subscribe, Like and Share if you want to see more.
Parts List:
================================================
CPU: Intel Core i7 7700K - amzn.to/2wmfiDr
Motherboard: MSI Z170 SLI Plus - amzn.to/2h0UDPF
GPUs: EVGA GTX 1080Ti Black Edition - amzn.to/2wmlY4y
Memory: GSkill Trident Z RGB 32GB 4266MHz - amzn.to/2jl5Pes
PSU: Corsair HX1000i - amzn.to/2h1mIpW
SLI Bridge: Asus ROG 2 Slot - amzn.to/2ff9aqN
SSD: Samsung 960 EVO 1TB M.2 - amzn.to/2h1nZgW
Case: Phanteks Enthoo Evolv ATX Matte Black - amzn.to/2wXkAJ7
WC parts
=================================================
EK Slim 360mm.
EK GTX 1080Ti Nickel Plexi.
EK Supremacy EVO Nickel Plexi.
Bitspower Black Sparkle Fittings.
Bitspower 16mm Acrylic Tube.
Mayhems X1 Black - www.singularitycomputers.com/...
SC Protium Medium Silver Polished - www.singularitycomputers.com/...
SC Protium DDC Mod Kit Silver Polished - www.singularitycomputers.com/...
SC Ethereal Single Silver - www.singularitycomputers.com/...
SC 120mm Backplate.
Corsair SP 120mm.
Aquacomputer Aquaero 6 XT - www.singularitycomputers.com/...
Aquaero 6 XT Heatsink Black - www.singularitycomputers.com/...
Aquaero 6 XT Faceplate Black - www.singularitycomputers.com/...
Aquacomputer Fabwerk Aquabus - www.singularitycomputers.com/...
Aquacomputer RGB LED Strips x2 - www.singularitycomputers.com/...
MDPC-X Carbon-BTI Sleeve - www.singularitycomputers.com/...
MDPC-X Bulk Kit #1 - www.singularitycomputers.com/...
Icemodz Cable Comb Bulk Kit #1 - www.singularitycomputers.com/...
SC Custom Wiring Bulk Kit #1 - www.singularitycomputers.com/...
SC Bolt Pack WC #1 Moderate - www.singularitycomputers.com/...
Purchase our products on our official store: bit.ly/buy-sc-products
Or
Purchase our products from our retailers below:
=================================================
Performance PCs (United States):bit.ly/buy-sc-at-ppcs
MAINFrame (United States):bit.ly/scproducts-at-mainframe
Dazmode (Canada):bit.ly/get-sc-at-dazmode
Highflow (Netherland): bit.ly/scproducts-at-highflow
Mayhem Products Now available!
================================================
Purchase now: bit.ly/get-mayhems-at-sc
MAINFrame Customs M7 Pumps
=================================================
Purchase MAINFRAME Customs M7 Pumps Now: bit.ly/get-sc-pumps
SC Custom cable builder
=================================================
Get your full custom cable built by us: bit.ly/get-your-custom-cable-kit
Singularity Computers Info & service:
==========================
Official Website: bit.ly/welcome-to-sc
Order a Custom System/Request our service: bit.ly/lets-build-your-system
Official Store: bit.ly/buy-sc-products
Become part of the channel:
=======================
Patreon: bit.ly/become-our-patron
Support Us page for the Channel & Site: bit.ly/support-sc
Ebay Affiliate Link - goo.gl/V4GjRz
US Amazon (Affiliate Link) - amzn.to/1NaAdQl
UK Amazon (Affiliate Link) - goo.gl/zKoElt
Follow us:
========
Singularity Computers Official Facebook Page: bit.ly/like-us-on-fb
Singularity Computers Facebook Group: bit.ly/scfbgroup
Singularity Computers Official Twitter: bit.ly/follow-sc-on-twitter

[@GizmoDuck]

The "Small Problem" with the build is that, there is no "Small Problem" Excellent work as usual sir.

[@siphojiyana9932]

Great builders always mean well done. If it was up to me I would seriously rate you are amongst the top five builders of water called systems in the world. The tension to detail that you put in all the PCs that you build is absolutely amazing 👍🏿

[@nikumeru]

Love the idea of showcasing the systems, you build beautiful PCs, they deserve to be seen!!!

[@BeerBellyDK]

That is one seriously good looking system! :) Love that blackout theme.

[@taipeitaiwan10]

I'm really struggling to see the issue in the build. But then again I'm not a perfectionist like you. Beautiful build, again!

[@LastRightsTV]

Masterful as usual. Thanks for sharing your work.

[@C_Squared]

if I had to guess the mistake, it the tube going from the top video card to the GPU. not sure why so many fittings were necessary.

[@JLeeCN]

building a black/stealth system in this case right now...thanks for the ideas keep up the great work

[@TheByzantineEmpire]

These types of videos are great! cant wait for the next one :)

[@admodz3292]

Stunning buddy

[@DrOrtmeyer]

2 360s, nice :) I recommended people your videos for good radiator usage.

[@meissel1976]

hi, love your stuff, thank you for sharing. think the problem is filling the loop and the res.

[@taipeitaiwan10]

Is it the one unplugged cable on top near front of case?

[@pablom7110]

Keep te videos coming love the content and that gorgeous red pc 😙

[@brandonmunford4375]

Awesome build as always, are one of the unused plugs/stop fittings on top of the reservoir matte black as a opposed to black sparkle, therefore not matching the rest of the build?

[@Karpata1]

11:33 The left fitting on the CPU Block looks a little tilted ^^ Maybe it's just the camera angle

[@lilganstaa]

I think i would find the filling piping for your resevoir would be a bit tricky withought dripping anything around. It's pretty deep in the case.

[@nick-ti8on]

is it me or the motherboard is not placed correctly?I mean the back with I/O Ports is not properly aligned....the part where Pro series is written; Sorry for my english.

[@miller330i]

How did you mount the Aquaero to the psu cover? Thanks!

[@carlospadron7081]

What made the temp sensor too deep to be fitted in the back port of the pump top? Is this normally possible?

[@deathtool1]

How come you test with the sidepanels off? Cause with this case espeically when you add all the temperd glass the cooling is significantly reduced

[@ericlafond3703]

I have that case and currently considering water cooling. If I only have one graphic card, would you consider mounting the reservoir horizontally on the PSU shroud? there's lots of room with only one card and it would allow for a ticker 280 rad in the front I think. I already own 7 ML140 fans that I want to use so I'm thinking a big 280 rad in the front, and a 140 rad at the rear, and two 140 fans at the top for exhaust.

[@Krimmy21]

Mayhems x1 black is clean water or pastel ? please tell me

[@SimoneFrigieri]

Have you ever had a color variation on the Black Sparkle finish? I have fittings that some of them look more black gold and some more neutral gray Next to a shiny silver finish they look both darker though

[@pinepcdesign8459]

Love the idea of "only b-roll!"

[@atenleggedninja]

As you look at the GPU cables, the one on the right has a bit of a bulge right in front.

[@gyrozepelli872]

is there any chance you could sell fittings on your site?

[@swiftbiscuits]

There are two extra holes drilled in the top left case door hinge that are not being used, not sure why they are there.

[@DesignPixelmaster]

wow... what a beauty :)

[@mojosama1591]

Will Element 6 have other colour options available

[@gorgsterd4075]

I've always appreciated your work long time subscriber ....In my own opinion where is the defect? Well it is where the shroud is just beside the aquaero you see the 4 drilled holes......showing.

[@SanderKonso]

Are you missing an IO shield?

[@StureDingo]

Blue bit of the USB3 front header is showing. Is that the small problem you are refering to?

[@d3lsl0w]

Did you install the CPU waterblock upside down because the pipes will align better?

[@angrygoldfish]

I've seen two 360 Black Ice radiators fit inside the Enthoo EVOLV ATX.

[@nimrodery]

The bend that goes from the CPU to the top radiator is wonky.

[@43jacksonr60]

hello, I have been following your videos for awhile. i would like to learn your way of building a pc. you are waaay better than everybody else ive seen. i dont know much about watercooling but i have been building pc and repairing them since commodore days. like you i am detail oriented. you are an artist tho. so i tip my hat to you. in my mind you are the best that ive seen. soooo. im upgrading my pc from I5 gtx 960 to i7 6600k i just bought an msi mpower titanium z170a with avexir raiden series memory. i really would like to do a raiders themed pc. i cant decide on a case. or watercooling elements. i kinda like the thermal take tower 900 also this case your using. can you help me decide what to buy.... thank you so much.

[@chrismajor2501]

Loved the Vid, how about doing a vid on fan curves to water temp please

[@Jacob-oo4yq]

He already did it and it is not very difficult, I figured it out after like 10 minutes of clicking through the settings of Aquasuite.

[@LegendScrims]

I have a new 360mm rad (inside of an inwin 303 case is just going pull for the fans going to be okay?

[@carlsson614]

JpKJosh Yes, just pull is going to be more than enough.

[@LegendScrims]

Awesome, thanks for the answer!

[@ancogaming]

Yep, pull is going to be alright. Push/Pull however... if you have the room and the right fans, you won't regret that either.

[@Dan81825]

My guess for the "small problem": 12:20 you can see a black top cap instead of black sparkle

[@Aurienx]

How do you actually control the fans using the watertemp? what hardware/software is needed for that?

[@Dan81825]

You just need an aquaero or poweradjust (+aquasuite) and a temp sensor that measures the water temp. Then you can control your fans dependent on water temperature. The poweradjust cant control as many fans, but you can buy 2 or 3 of them and connect them via aquabus. I'd recommend an aquaero though^^

[@gustav5423]

How do you get a nice bend on the 24pin cable? Mine looks like crap in my s340.. :/

[@svenmeyer2901]

Custom cables need to be trained to stay in place. The sleeving must be heatshrinked very tight so you can bend it into any direction and have it stay there. Hope this helps! You can also watch the custom cable video for further info! Cheers

[@ModrunOfficial]

how do i base my fan speed on the coolant temp tho? some kinda temp measurement thing inside the rad or something?

[@nilscouturier7981]

You need to purchase a special fitting with a thermal probe on it. And then you must connect ir to your motherboard if it has a connector dedicater to this or to something like the aquaero.

[@jurunce]

You need a temperature plug to insert into the reservoir (best option), and then you connect that to the TMP_IN header on the motherboard to control fan speed in the BIOS (this is my plan for now at least), or connect it to an Aquacomputer Aquaero 6 (LT, PRO, and XT) USB fan controller to control fan speeds in the OS.

[@ModrunOfficial]

sooooo this thing then? www.ekwb.com/shop/ek-cable-temperature-probe-10k-ntc-100cm

[@hr0thgar_]

modmymods.com/fittings/g1-4-temperature-sensors.html

[@Abyssic1]

do you also do sound dampening if a customer would request it? i wonder why i haven't seen that yet.

[@svenmeyer2901]

All builds are made down to customer requests but nothing is impossible and we are open for new ideas in every build. New ideas keep this industry fresh!

[@mattgraves5450]

tubing out of the top rad where it goes into the waterblock isnt parallel (completely straight up and down) slightly to the left.

[@SivaRamaKrishnaMeka]

matt graves yes and it leaked

[@carlsson614]

Hi dude! How did you make the aquaero show a custom startup logo ?

[@booyaaaaaaa]

Aquasuite -> Aquaero -> Information Pages -> Special pages & logo

[@carlsson614]

booyaaaaaaa thanks!

[@buffalowings7170]

Hi, I know it has been two years. I just want to know how long you ran it with the black fluid?

[@SivaRamaKrishnaMeka]

Buffalo Wings It leaked completely after 3 months of use. The place I used it had a hot climate.

[@buffalowings7170]

@@SivaRamaKrishnaMeka Thanks for the info.

[@akke_boy]

wher can i findt a temp senser i have look all over the internet but can't fint any

[@bothellkenmore]

More info on temp sensor would be nice.

[@svenmeyer2901]

Noted for future videos! Thanks

[@georgesj9536]

Are you going to add the option of colored Carbon Fiber on E6?

[@carlsson614]

Georges J this is real carbon fiber not fake vinyl film. I don't think real CB can be coloured.

[@georgesj9536]

It can, its used on exotic cars.. The same cars he based his concept on. just google 'green carbon regera' mclaren has done it too as an option, so does bugatti, pagani etc etc

[@finny220]

do a build in a phanteks enthoo luxe tempered glass

[@ancogaming]

Only small Problem that I can see so far is that you don't slap 4 RAM Sticks on a Z170 board. Sometimes that's asking for trouble. 2 sticks normally do the trick in dual channel. And by the way, the board itself can only handle DDR4 RAM up to 3200 MHz, so either they did a BIOS update which I don't know of, or 4266 Mhz RAM won't run as fast as it could. P.S.: No I don't need the mod kit.

[@YannikTheWelsch]

Kind of confused about your PC builds that you have for order. You use pictures of the Phanteks Evolv on your websites and also build in it on your channel, but the actual case for the ordered build seems to be the NZXT H440. An oversight perhaps?

[@thegirthquake8574]

Holy hell.. 5.2GHz at 1.45v on an Intel chip? That's just murder!

[@MrPigeonaids]

make a build in a LianLi or Phanteks Elite case.

[@rcradiator]

I would also like to see a Phanteks Elite build. Every build that I've seen either looks awfully empty or is way too cluttered (the 8pack Orion build). No build I've seen has made it look good. I've been waiting for Jayztwocents to do a build since he did say he wanted to try the case, but it looks like he's backpedaling on that statement. It would be awesome to see a well-built loop in the Elite.

[@user-dd2vc5cd1p]

Are you from Australia?

[@techmantra4521]

Nice build but I personally don't like black fluid. I feel like it defeats the point.

[@ATSF1317]

How much does this system cost?

[@Dominik-il7uv]

ATSF1317 all the components (with the watercooling) should be around 2500€, maybe 3000€ But you have to pay Singularity Computers as well

[@TheJjjoj]

Yo, Daniel, I appreciate the continued build videos. I have bought a decent amount of your products from sites like PPCs and have always been very satisfied. As far as sleeving USB 3.0 cables, I use 1/2" PET sleeve(example linked below), 5/8" 3:1 heatshrink that I expand carefully using a few sets of pliers, and a little bit of super glue at the ends to hold it all in place before heating the heatshrink. It's quite finicky and usually takes a few tries to get it to look good every time you do it. The end result is totally worth it though. www.amazon.com/gp/product/B00QQXPZPU/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

[@phive7258]

beast as usual fuck sakes lol.

[@deedeedvd]

What, 37 degrees Celsius inside you mean? Shit man, AC to the max

[@ElNeroDiablo]

It's bloody winter here right now (or at the least coming off of winter), he's probably got the heaters on so he don't freeze to death. like, it's about 14 Cel outside for me, my CPU (a 5820K stock) is sitting at 27 Cel under a Nepton 120XL, & my 980Ti's are sitting at 22 Cel (monitors) & 19 Cel (SLI co-processor) respectively under EKWB TitanX (Maxwell) blocks + nickel backplates, with a pair of 360mm EKWB CoolStream SE rads keeping them cool with 6x Vardar F4's combined.

[@GTROLA]

The CPU water block is upside down.

[@Aurienx]

it has to be in order to get the "in" and "out" on the block correctly fitted for a waterloop like this. obviously it could be placed in the right orientation, but that would mean that the bends would be a lot more complicated.

[@GTROLA]

atngamingx No extra fittings needed, swap the parallel gpu "in" and "out", use the dual rotary to meet the cpu in. Still a beautiful build nonetheless.

[@costafilh0]

I love the attention to detail of SC builds but the video format is unbearable these days! One can only hope for better videos since the content is great! This is KZbin not a Forum. /constructivecriticism

[@svenmeyer2901]

Thank you Costa for the feedback. What do you suggest would be a better format that everyone or most viewers would like more so that we can take it into consideration? Please be creative since we don't want to have the same format as most other tech channels =).

[@SingularityComputers]

Yeah we are always looking for new ideas so feel free to be constructive and give us something we can use.