PSA PA-9/PX-9 and LFA Challenger 9mm carbines

  Рет қаралды 899

RageQuit003

RageQuit003

Күн бұрын

Пікірлер: 15
@combatreadychannel
@combatreadychannel 10 ай бұрын
Half the problems I run into with PCC AR’s are from the mags.
@RageQuit003
@RageQuit003 10 ай бұрын
You should have saved up for that XCR-L I keep telling you to get.
@albertptran
@albertptran 9 ай бұрын
Amend2 mags were 50/50, Pmag okayish, and Glock the best for me
@RageQuit003
@RageQuit003 9 ай бұрын
@@albertptran I've never used the Amend2 Glock mags. I have seen 3 of their AR mags malfunction.
@Citizen2ACitizenLLC
@Citizen2ACitizenLLC 10 ай бұрын
I’m still trying to get better on diagnosing failures on these custom builds. It’s super hot or miss with me. Great video
@RageQuit003
@RageQuit003 10 ай бұрын
I'm hoping that isn't a skill you're going to need with your Prodigy build.
@Citizen2ACitizenLLC
@Citizen2ACitizenLLC 10 ай бұрын
@@RageQuit003 lol, naaah. I think the work done was fairly str8 forward. It’s performing as intended with no hiccups. Going out again to do the final 260 rounds so I can put out a 500 round video. Haven’t cleaned it after the first 240 (except for when I went out the first time) so fingers crossed….
@spacedredd
@spacedredd 10 ай бұрын
I've a QC10 small frame lower, that I was going to put a 9mm upper on. Now I'm thinking Matador Arms MAT-9. Self contained and don't have fiddle w/buffer, springs and the what not. Plus they're base out of SATX. Also under $600 Great video. I do appreciate your content. Plus the cool guns. Not as cool as my XCR-L....🤣🤣🤣🤣
@RageQuit003
@RageQuit003 10 ай бұрын
If Matador releases a rifle length upper, I'll be taking a serious look at it. Nothing is as cool as a XCR-L...except 2 XCR-L's.
@Citizen2ACitizenLLC
@Citizen2ACitizenLLC 10 ай бұрын
So was it the mags causing the failures in the beginning or was it the heavier spring
@RageQuit003
@RageQuit003 10 ай бұрын
No, it was the mag. The black gun is the PSA I've had for a very long time. It uses a totally different flat wire spring from David Tubb Precision. When I switched to the Glock mag it ran perfect. So I threw in the slow mo's I filmed at 120fps. The OD gun is the LFA Challenger and by coincidence didn't malfunction with my 2nd ETS mag. I was running the new Kaw Valley Precision spring in that one, but I'm sure it would have run fine with the stock spring too.
@Citizen2ACitizenLLC
@Citizen2ACitizenLLC 10 ай бұрын
@@RageQuit003 got it! Good deal. What camera are you using? I’m looking at stepping up my camera game. Currently using the GoPro 9…. Atibal shots via my DJI mini 2 and when the battery dies or overheats on my GoPro, the iPhone 11.
@RageQuit003
@RageQuit003 10 ай бұрын
Most of the time I use my old GoPro Hero7 at 4K 60fps. If I need close ups or slow mo I use my Samsung Galaxy S23. I never upgraded my GoPro because cell phones are better than them these days. I almost bought a Google Pixel just have better cameras and screen to compared to the new GoPro's for about the same cost.
@carlh593
@carlh593 4 ай бұрын
Would have been better if the rifles were compared to each other and what the differences are?
@RageQuit003
@RageQuit003 4 ай бұрын
So the back to back slo mo's and the tabletop wasn't good enough for you?
Wraithworks WarScorp9 Carbine - Bolt Catch Fix
2:59
RageQuit003
Рет қаралды 654
Wraithworks WarScorp9 Carbine
2:25
RageQuit003
Рет қаралды 1,1 М.
Сюрприз для Златы на день рождения
00:10
Victoria Portfolio
Рет қаралды 2,5 МЛН
Когда отец одевает ребёнка @JaySharon
00:16
История одного вокалиста
Рет қаралды 16 МЛН
S&W M&P9 Metal 2.0 Performance Center - Spec Series
1:56
RageQuit003
Рет қаралды 324
Modded S&W M&P9 Shield vs MGM Spinner
1:31
RageQuit003
Рет қаралды 116
KelTec Sub2000 Gen 3
0:59
RageQuit003
Рет қаралды 3,8 М.
Bear Creek Arsenal 7.62x39 10.5" side charger w/ ASC Mag test
0:48
Canik TTI Combat vs MGM Spinner #tarantactical #tticombat #canik
1:00
S&W M&P9 CORE - Do It The Hard Way #M&P9 #Competitor #MGMspinner
1:00