When I interviewed for a position back in '93, you as an operator were an independant contractor trained by Herzog to run and maintain the machine. You were on call 24/7/365. You had to supply your own vehicle and tools, were paid by the hr and a per diem. When you got the call, the machine was in transite or already on site, and you had 24 hrs to get to the machine. These were usually leased to the RR with the operator. Dam good money if you knew your job. Gypsy occupation for single guys only.
@ColtonLloyd Жыл бұрын
I have never seen this before,pretty cool.
@johnhagan77422 жыл бұрын
Well, that's one way to load a backhoe onto a work train. You'd have to be out of your mind to load it up like that!
@Mark-j1e8o4 ай бұрын
I bet it's OSHA approved
@jademonkie11 жыл бұрын
Herzog Contracting is no second rate outfit. They are one of the largest and have been in the railroad business for 40 years. This Cartopper is a Patented machine. Herzog holds over a dozen patents on equipment that they have designed for railroad use. The Cat 428D weighs around 17K. They dont hire any knothead off the street to run a Cartopper. You have to have experience with a machine before you can train to operate the Cartopper. Which was two months training the last I knew.
@casylius11 жыл бұрын
A clever improvise but this is probably one of the many cases that just because you can, does not mean you should. I cannot imagine that they do this every time to unload rock.
@mikehoward7201 Жыл бұрын
Wow. Really cool . And brave
@georgealmeida73822 жыл бұрын
I used to run backhoe and made 100 bucks when I bet my coworker that instead of driving half a mile to a gate to get on the other side of a fence that my trench had to cross I could jump over it with the backhoe. Pretty much the same procedure as this except up and over a fence and drop on the other side.not quite as high as a railcar but high enough to be nervous lol
@jademonkie11 жыл бұрын
The NS used a Cat 319D, and that's a 43,000 lb excavator on steel tracks. The Herzog Cartopper has special L-brackets on the bucket, mid mount frame, and stabilizers to keep it centered and allow it to slide along the top rail of the railcar. It has a hydraulicly driven winch and generator in the bucket. The Cartopper is used to load AND unload anything using various size buckets, a Herzog twist-o-wrist grapple and even an electro-magnet. Watch---These Backhoes are Awesome!----
@alcopower57103 жыл бұрын
Awesome display of engineering and skill 💪
@rwhitenight9 жыл бұрын
I used to help in designing those buckets back in the mid-80s, but never knew they ever be used like that :-)
@rad376613 жыл бұрын
I was wondering how the loading process went, I have a video of one being unloaded; that takes a little longer and the operator uses the boom to pull himself backwards. If Im correct, I think theres a hydraulic winch mounted in the front bucket to pull himself forward. Nice clip.
@Bowtie4112 жыл бұрын
Although entertaining,having the backhoe bucket hanging off the edge of the street at the start was dangerous.Personally,I also wouldn't have drug it on the knuckle,but rather bottom of the bucket.Much more stable,and then you wouldn't need a strap to drag it,just use the front bucket as a slide,and the backoe do push it on.Same for getting down.
@f5gwtw12 жыл бұрын
why do people crank it wide open when they're doing slow, technical stuff like that? lot less jerky if you just use lower throttle.
@kenreed44387 жыл бұрын
for those saying "build a ramp" steel tracks tend to slip a lot on a steel ramp. you can climb anything with a backhoe if you have time
@frankovito2 жыл бұрын
I felt sorry for the tracks
@tejastiger6112 жыл бұрын
I was holding my breath ..... I was thinking, that dude is about to tear up allot of machinery ... I was 100% wrong Cool video ....well done on the sound edit too..
@boxcarnoah12 жыл бұрын
That railcar has a 263,000 gross capacity with 63,000 being the weight of the railcar and 200,000 lbs of rock. The dead load of the backhoe is at least 30,000 lbs plus live load reaction. I am surprised the Federal Railroad Administration would allow this since the railcar would be overloaded. How'd they get around that?
@ejkoechling12 жыл бұрын
pretty cool. I can lod a backhoe on the back of a semi like this, but its only about 4 ' off the ground..That looks like some scarey shit to do for the first time. wonder what went through the operators mind when they first came up with this idea????
@cybaggs3 жыл бұрын
Very cool, just wish the camera was less shaky.
@rad376612 жыл бұрын
The operator is trained and employed directly by Herzog Rail Systems to operate the machines; they do not work for the railroads.
@Gomezable11 жыл бұрын
I love how it looked like a break dancing pose at the end. Awesome skills!
@milkymigs12 жыл бұрын
Talk about balls of steel!!!
@windrivercountrykid13 жыл бұрын
Nice video,notice the wench line pulling the backhoe.
@GrayFury12 жыл бұрын
If your hydrolics break...you're going to have a bad time!
@ACommonError12312 жыл бұрын
just imagine the pressure on that shovel. God
@martingarza85518 жыл бұрын
Seen done like this but without the cable pulling it.
@MrZkr12311 жыл бұрын
Now thats talent
@ShuRugal112 жыл бұрын
the guy that loaded one without using a winch was cooler ;)
@MakeStr113 жыл бұрын
Looks really hard to control the two sides in once.. Skills.
@freddythestandard12 жыл бұрын
same way you get it on?
@johncena0809112 жыл бұрын
nice video bro!!!!!!!!
@Lets-do-this-12 жыл бұрын
Good job
@lilbabyboi2412 жыл бұрын
man great job...
@100PercentOS210 жыл бұрын
Check out the cable that is pulling that thing with the front bucket on it.
@bennetts-revenge_25 ай бұрын
Pretty cool but camera shaking way too much
@wildbill69769 жыл бұрын
way too much stress sitting on back of bucket (main reason his bushings are worn out and bucket flops around). If you put any serious weight on a backhoe or excavator, you'd best either have bucket flat on ground (or preferably, bucket out and teeth in ground)
@stubbenmonkeyfencingtractors12 жыл бұрын
that would be so funny to do if the guy who owns the digger had pissed you off load it on a truck and leave it and wait for the look on his face
@kagenh12 жыл бұрын
Should have slid on the bucket to not hurt the hinge
@awesomeoverload12 жыл бұрын
haha you use the dozer and knock over the car with the backhoe to get it down...Lol
@Bravo21Niner12 жыл бұрын
same way you got it up.
@BluesvilleUSA13 жыл бұрын
that is some amazing shit!
@rad376612 жыл бұрын
Shameless plug for my page; I have the unloading video. ;.) "Unloading a Herzog Cartopper". Cool to see this done, either loading or unloading.
@100PercentOS210 жыл бұрын
Got to be hard on the links that connect the dipper and the bucket. Notice how the bottom of the bucket isn't even touching the ground I see that special device pulling backhoe loader on car. Looks like you used a forklift or something to lift the front end because the front bucket wouldn't quite reach that device you probably have on a winch. I thought there was some gimmicks to this trick. I'm not impressed!
@MrSagamirage12 жыл бұрын
good driver...:p
@chinoantrax10619 жыл бұрын
What would be the purpose of doing this? I imagine they couldn't transport like that for obvious reasons. So is it to unload material (I assume coal/rocks/debris?) Or what?
@sandy1979brat8 жыл бұрын
+Chino Antrax Yes, they would unload the material from the railcar (rocks, coal, even sugar beets!) My dad did this for years.
@ali9913113 жыл бұрын
كلش حلو
@krishnashetty97276 жыл бұрын
super
@braker19radio12 жыл бұрын
@f5gwtw you need all those rpms in order to lift the wieght
@joek061711 жыл бұрын
it's not too overloaded, and not overloaded for long. and the backhoe is not 10 1/2 tons.... more like 5 tons
@arragon548111 жыл бұрын
So that's how they do it
@railman201512 жыл бұрын
lets hope the hydrolic line doesnt bust, or youd be fuckkeddd
@idontgiveafuck0811 жыл бұрын
i could do that without the anti tip over stuff
@cjone3312 жыл бұрын
@jimmythedoom play the video backwards and that will show you
@goatman8612 жыл бұрын
i guess pretty much the same way :)
@krakr10jak12 жыл бұрын
now how the hell do i get down XD
@TheSense1312 жыл бұрын
crane
@kicajek112 жыл бұрын
@GWR4079 that isn't JCB... :)
@spaghetti984510 жыл бұрын
Not to be the downer but have seen it done way smoother with less wear on the vehicle... In other videos as such. Might be my own opinion but the operator wasnt really an expert right?
@famfam6205 Жыл бұрын
Now go ahead and bring it down
@lucmc1233 жыл бұрын
I think I would need a change of underwear to be able to do that
@markash197112 жыл бұрын
people who know nothing about machines and see stunts like this mistake brave stupidity for skill
@AmirKhan-tu9uu6 жыл бұрын
hi
@andregross742012 жыл бұрын
Because that's no fun
@8880Dingo12 жыл бұрын
why not just get a cran to put the bacho on the tran or use a ramp?
@westsidejn12 жыл бұрын
I have a cat 420d and its easier to get down
@cjone3311 жыл бұрын
watch the video backwards
@00Widget11 жыл бұрын
Oh sure a 30,000# backhoe ,,if you dont have facts just superglue your fingertips together and keep your ideas to yourself,idiots who post inacurate info should be blocked from youtube.
@romocowboysfan12 жыл бұрын
There's some proof of MADE IN AMERICA!!!
@MrVorgra12 жыл бұрын
@romocowboysfan Ha wow, you do realise Cat Vehicles are made in over 30 countrys, Bottom luck that vehicle there wasn't made in america