Rain Days = Gearing up for Hay Season ... Setting up the Bale Baron |

[@joecarlson6428]

Nice and peaceful video. Happy belated anniversary. Barb and I celebrated our 46th in May. Thanks for taking the time to video and post.

[@farmingforfunandprofit940]

We had to get our Baron from a dealer in Tennessee, They have a roving set up man that came when we started it up..... We traded a Bale Bandit, which uses basically the same type of functions sequence of go and no go sensors in the PLC controller So far almost 60,000 bales have passed thru it with only one O-ring failure.... We presently have the plunger out of the !840 Mf baler for worn out lower bearings,,,, that we were able to locate at the J.D. dealer.... No M F dealer within 200 mile could obtain.... The bearings are for the thresher bars in an Amadas peanut combine.....We sort of had a introduction into the PLC controllers buy using the Bandit for 3 years......

[@ChrisColhour]

Great pictures of the Northern lights.

[@sawmillcharliesbeefarm]

Your going love the bale baron, the bale handling is great, stacking the bundles in the barn, putting them on a tractor trailer, or on a flat bed truck is very easy, fast and the load is very stable as long as you have the bundle of bales held together tight.

[@griggsfarmsllc]

Wow. Mind blown. I might have to come do some square baling for y’all. Let y’all have a date afternoon

[@laurawinfield4401]

Kayla,make certain you are careful when you are pulling the 1842 and the bale Barron up and down any hills. I had a friend who had the same setup here in Oklahoma. He was pulling it home when he drove down a hill which caused the baler to jack knife because of the weight of the baron pushing from behind. He had to sell the baler as scrap. Stay safe.

[@farmingforfunandprofit940]

Our Baron has Tongue actuated brakes, but beig as our unit is stationary unit they aren"t needed

[@farsalah]

A beautiful and quiet place that brings comfort inside you

[@johnkemp4370]

Remember that the Baron is a big square baler, you are just feeding it different

[@davidschlecht3016]

A great end to the video, the northern lights and a great way to close out the busy day.

[@corrinurecowman2138]

Brilliant job ,,,🎉best of luck with new machines ❤

[@peterbone3922]

I must admit kayla your looking great and bubbling since your surgery long may it last and I can't wait too see your new toys in operation

[@robdeaton9910]

The Aurora must have been wonderful. Down here in SE Kansas it was cloudy and we didn't get to see it.😢 Anyway happy anniversary 🎉😊.

[@gilbertahsam643]

Happy anniversary to the both of you. God bless you all in Jesus christ mighty name Amen 🙏

[@greggrondin3034]

That’s a good look setup!!’ Looking forward to seeing it in action!😎

[@domangst8232]

Happy Aniversary guys

[@williamwright8286]

Happy Anniversary

[@farsalah]

❤❤❤❤❤

[@MehmetBozkurt-u6o]

Masseyle işler güzel

[@jameslutjens6780]

Hi again I just cut mine down and it's starting to grow back and another question what do you guys do for the blister beetles when do they come in the middle of the season and what do you spray for that

[@jameslutjens6780]

And happy anniversary to you guys

[@pocketchange1951]

👍👌❤️🇨🇦

[@jameslutjens6780]

Hi I was just wondering on a question about your alfalfa do you guys have a problem with weevils in your alfalfa and if you do what do you do about that

[@ChroniclesofKayla]

We did for the first time this year … Jason jinxed us … we had to spray it.

[@johnkemp4370]

Not getting any younger? You make me laugh! Think about offing your plows and older cab John Deere and plowing with the 165. You have a lot of cash in that JD

[@pawelsnarski3632]

❤❤❤