Rainfall prediction using Fuzzy Logic Toolbox

[@rohitsals]

For Those who find this project helpful. Please Subscribe to this channel

[@anudeepreddy1246]

hey rohit can u share the matlab code for this project ?

[@ankithavarma8385]

+anudeep reddy hey do u get that code for this project

[@danielkayange4929]

Hi, could you share with me the Matlab code for this Project, it is so interesting to me, my email: [e-mail]

[@rohitsals]

You can get the code for a minimal charge of 5$

[@rohitsals]

You can get the code for a minimal charge of 5$

[@prakashgatiyala316]

6:11 Total no. of rules will be 3^5 =243 rules

[@shivangichaudhary2262]

Today I came across to this tutorial and its very good and informative.

[@selvarajirs7066]

Thats good Rohit salgotra, human error is natural. no issues, now you are correct, its based on membership function and input variables

[@rohitsals]

Thanks for correcting me.

[@sanju22937]

How can I get the Matlab code for this project?

[@amirahramizah1041]

hey, there u are amazing. finally, I found someone who does a video on the weather. btw can u show how to get the weather event (sunny, cloudy, etc) using fuzzy rule based system . as in forecasting the weather events based on the weather data. PLEASE IT WOULD MEAN SO MUCHHHHH FOR ME . PLEASE

[@albertberdjour8819]

Thanks Rohit for this video. Please @ 7:42 can you help me with how the rainfall predictor was created. Thank you

[@mudasiryasin540]

@Rohit How can I auto generate rules. Surely there must be a way to automatically generate so many rules.

[@AhamedKabeer-wn1jb]

Thank you..

[@dr.wazihahmad786]

how you know that what is the relation between rainfall and its predictors??? if you know already then it is a matter of only mapping.....but ML should be done to identify how much temprature affects the rain etc... etc...

[@danielvargastoro8974]

How you can upload many rules?

[@sudeshnaTrivedi]

How to determine the membership values as in how to get the R and P matrix after doing membership functions?

[@jyotinagwan6767]

Sir,how to design a fuzzy system for a given truth table...in which there is 3 input variable (a,b,c) , having value 0 or 1 and 1 output variable 'y'.y will have value 1 in case of 3,5,6,7( after converting a,b,c combination value into decimal) otherwise the value of'y' will be 0.The system should be designed using fuzzy logic toolbox.

[@rohitsals]

I can help with that but you have to pay for it, if willing to send me a mail at: [e-mail]

[@sheetalnetam5217]

Thanks for this wonderful. It helped me to understand fuzzy logic using fuzzy toolbox. I have a query that how can I get membership value of input parameters (like u have given 5 parameters i.e.relative humidity, total cloud cover, wind direction, temperature and pressure) which is defined in the range of 0 to 1? Or is there any other method to get the value in between the range of 0 to 1? I'll appreciate your quick reply.

[@rohitsals]

You can add the membership functions same as I have done.I dint used anyother method, so not sure if it works in any other way or not

[@sheetalnetam5217]

Thankyou for the reply. I want to get the final output (which lies in between 0 & 1) before defuzzification step. Is there any matlab code for that or is it possible to get it?

[@kannanaravind1922]

@@sheetalnetam5217 making the output range in [0 1] would give the output in that i guess

[@syedsubhanahsen2621]

It is necessary for the ranges of the MFs to overlap?

[@rohitsals]

Yes, bcause there is a gradual increase in the range of MFs. for example take the case of age of young (0-20), middle aged (20-40) and old age person(40-60). So here we can't say that aperson with age 20years 1 second or 21 years, or 20 years 6 months 3 days 24 hours and 35 second as middle aged. So there is never an instant increase. It is always a gradual rise.

[@kashifkazmi1615]

Sir.how we will calculate the time cost of rules.which are fired??

[@mrdr5637]

Hi, How do you deal with values in case you have time series and not values you enter manually for each run? Thanks.

[@rohitsals]

Thats purely a case of Matlab coding, you can code it as per your requirement

[@ايفانطلالفاضل]

Hello, I am from Iraq, a student of the fourth stage. I worked for the graduation research and need the rules from 18 to 33. Thank you for helping me because he is in need.

[@rohitsals]

You have to pay 50$ for the code. mail me: [e-mail] if you wish to receive the code

[@Kingslayer10184]

Will I be able to get the full project at the earlies ?

[@rohitsals]

50$ is the price for the code. Mail at: [e-mail] I will share the link for the payment once you mail me

[@bukhari5553]

Sir is this the expert control system and how to get file of this project

[@muhamadazzamkusyairi2655]

Hello sir. How to calculate the RMSE based on the result? Can you explain on that. Thanks sir.

[@Qtfyd]

Hi Rohit, Is it possible ask you some specific questions based on my specific need using fuzzy logic? I'd like to email you if you dont mind.

[@rohitsals]

MAil id is : [e-mail]

[@MagnusPrimeZ]

where i can get in contact with you? to get the code

[@MinhNguyen-mz7oy]

Please answer me, why don't you share it for free ??

[@wendyromero3247]

Hi, I want to you know how to do this in SCILAB, especially the second part, which from the command window evaluates the c.fuzzy.

[@rohitsals]

Hi, I have never worked with SCILAB, so may be you can ask some body else for the help.

[@yyychelsea6257]

Is it possible to generate the rules automatically by Fuzzy Toolbox?

[@yyychelsea6257]

if possible, how can it be done? would you please tell me in detail? thx

[@rohitsals]

it is not possible to do so, you have to write the rules by yourself. And if you want to know how much rules you want draw a binary table for each and make the results as per the number of inputs required.

[@rohitsals]

Do subscribe, if you like the video and for more stuff

[@maryamfajobi4824]

Hello Rohit. thank you for the tutorial. really helpful. how can i automatically generate rules for this? i'm presently working on prediction model for Asthma and i have to create 1944 rules. Please help

[@rohitsals]

[e-mail] mail me or call me at [phone] lets discuss

[@aishahasan404]

Hello, how did you choose the mf's for the input variables ?

[@rohitsals]

You have to select the mf's at your own or according to the conditions required for solving a particular problem. Example, if you want to travel to a new place, what are the constraints required. Mainly you require a good budget and a travel destination and these two become your input mf's. I hope you got what I want to say. You can even reduce or increase the number of mf's depending upon your requirements

[@aishahasan404]

Hello, actually I meant how did you choose the type of the mf for the inputs, like you chose trimf for one of your inputs

[@rohitsals]

ok, so you can choose it as per your requirement. There is no hard and fast rule of choosing any mf's. DO subscribe if you find the project helpful .

[@aishahasan404]

Thanx !

[@sayakmondal7526]

sir i am doing a project on fault detection in PV array. here i want to implement fuzzy interface system. please help me... i wannt to talk with you

[@rohitsals]

Mail me at [e-mail]

[@sayakmondal7526]

@@rohitsals please check mail and give the reply

[@iwannapapa5309]

can we have the same result with less rules?

[@rohitsals]

In this problem the total number of rules are 243. I have taken only 50 in this example. You can take as many rules as per your convenience but the results will purely depend on the number of rules you have. So using less rules will make the results vauge. You can use less only for demonstration purposes as I have done.

[@iwannapapa5309]

thanks for your help!

[@zulfadhli7789]

Is it possible i combine 'and' and 'or' in one rule?

[@rohitsals]

it is not possible to combine 'and' and 'or' in one rule because 'and' corresponds to max operation and 'or' corresponds to min operation, and we can follow only one operation at a time. Please revert if you find the response justified. Also subscribe for more stuff

[@selvarajirs7066]

sir, how it comes 128 rules, the total number of input is 5 only know

[@rohitsals]

there are 2^n rules where n corresponds to the number of inputs of system. Do subscribe if you find the video helpful

[@selvarajirs7066]

ok, but 2^5 =32

[@rohitsals]

Sorry, Selvaraj I was wrong at my part, the total number of rules depend on the total number of membership functions each input has. since there are 3 membership functions for each input so the total number of rules will be : 3*3*3*3*3=243 rules. for more answers related to fuzzy rules you can visit: www.researchgate.net/post/How_to_make_sure_the_number_of_rules_of_fuzzy_system

[@dewisyafitriwardani3739]

Sir, can i see your rule based to rainfall prediction?

[@rohitsals]

You need to pay for that, and I will design it for you

[@dewisyafitriwardani3739]

How much sir?

[@dewisyafitriwardani3739]

Im from indonesia, Is that the based rule still same? And for the variable x what kind of x variable that used sir? Im sorry for the video was not explicit

[@rohitsals]

@@dewisyafitriwardani3739 if you want the full code you can mail me at [e-mail] but you need to pay for that

[@rohitsals]

@@dewisyafitriwardani3739 mail me and I will send you the details.

[@cyl1646]

자막이 없어 너무 아쉬워요 ㅜㅜ

[@Fatoja1]

Hello Rohit! I want to donate to get the code but I don't know how to donate. Can you please help? Thank you.

[@rohitsals]

send the money through Paytm to 7780807990, after I get the confirmation, i will mail you the code

[@Fatoja1]

Can you please send me the exact link how to pay? Thank you.

[@Fatoja1]

Hello, I am not in your country and for you can be easy to use Paytm payment, but I don't know how to pay it. Can you please tell me how to do it?

[@rohitsals]

Can you send through Paypal

[@rohitsals]

PayPal.Me/xpedicr/6 use this link to transfer the money, you need to send 6, as the paypal wallet will be charging me some percentage for receiving it.

[@muhammadnasirimam7642]

Good day sir, i find this tutorial very useful. i am trying to assess water quality using fuzyy WQI. i have all my layers in GIS format (.Shp, .rst, .tiff). i want to prepare this layers and import to matlab and use as my inputs in fuzzy logic toolbox. the challenge i am having now is that fuzzy logic toolbox recognise files in .fis format. Sir, please help me with link, tutorials and other helpful materials that will help me understand how to convert my GIS layers to .fis format and how to prepare my inputs for use in fuzzy logic toolbox

[@shakilhasan4312]

i can select 18 th criteria ,how number of rule will be here plz, inform

[@rohitsals]

What is the 18th criteria ?

[@rohitsals]

for more information you have to pay 6$ or an equivalent sum of Rs 400/-

[@alibaashealfaas4515]

would Like to see as well if u can download a video how to do simulink on this project thanks

[@rohitsals]

Sure I will make a video very soon

[@manudorian9316]

Where do you get the dataset file for Rainfall prediction?

[@rohitsals]

I worked on it and its available from a paper available in literature

[@beastshadow5055]

oh nice sir.. will you guide me how to do fuzzy logic from starting stage

[@rohitsals]

sure, tell me what you need I will make a video regarding that and upload the same. Also watch the MATLAB series to learn about MATLAB basics. Do subscribe for more stuff

[@anaskhayat]

hello i want this code how can I get the Matlab code for this project?

[@xpedicr]

you need to pay for the code, it 10$

[@kashifkazmi1615]

sir,How you run .m file and how to create .m file?

[@rohitsals]

The code for m file is given in the description and for how to create the m-flie watch the MATLAB series 'Beginner course to matlab in my channel' and the link is kzbin.info/aero/PL5spBwBlZUff6KbyaZOflCPyuBERQi79B Do Subscribe if you find it helpful...!!

[@kashifkazmi1615]

ok sir i got it,thank you very much...sir,one more question can we find the time cost of rule matching in MATLAB? if yes ,then how?

[@rohitsals]

sorry, I have not gone through that. You can search the net for that.

[@kashifkazmi1615]

thanks sir i got it.another my question is that can we find the time cost of rule matching in FIS matlab if yes then how ?

[@muhammadshehbazaslam4549]

I need .FIS File? thanks

[@rohitsals]

You need to pay for that. mail me : [e-mail] if you wish to know the terms

[@abdikadirhassan192]

hi bro can give me this project for help plz

[@NikhilN-vh9pf]

hi i need this whole project can you please reply me quick im ready to pay

[@rohitsals]

mail me at [e-mail] for details

[@jayajiwo5265]

thanks man

[@AfzalKhan-rv1kw]

Sir ye code chaheye mujhe free me

[@sudharshantallam9050]

Bro I want code

[@rohitsals]

mail at [e-mail]

[@sudharshantallam9050]

@@rohitsals I mailed bro Please check your inbox

[@mrdr5637]

Thank you for this great and clear demonstration. Can you please explain how to build ANFIS that includes many ANFIS's when the number of input parameters exceeds five. I found an article dealing with such a situation (Development of an intelligent system based on ANFIS for predicting wheat grain yield on the basis of energy inputs: www.sciencedirect.com/science/article/pii/S2214317314000031) and I'm very interested to build my own model inspired by this article since I ave 10 input variables based on time series. Thanks.

[@rohitsals]

I will Go through the article and then will respond to your question.

[@vishartpatel922]

hello mr rohit, i liked this video. i hope u will send ur mail id so i can get some help from u .. thanks i want you to make video for washing machine.

[@rohitsals]

Sure, I will make video on washing machine. Ask your question here only, i reply to all the comments. Do subscribe!!

[@vishartpatel922]

actually i am working on it i just need some help. if possible provide me ur contact detail...

[@rohitsals]

share your email id, i will add you there

[@MinhNguyen-mz7oy]

WHY DO YOU LOSE MONEY, FREE NOT BETTER?

[@rohitsals]

KZbin doesnt pays anything, if you want it you need to pay

[@MinhNguyen-mz7oy]

hi i need this whole project can you please reply me quick im ready to pay

[@abdikadirhassan192]

hi bro can give me this project for help plz