Raising your motorcycle using the Ultimate Ultimate Cycle Lift.

How to raise your motorcycle using the Ultimate Cycle Lift.

[@GawgaCracka]

If you guys are out of business, take your vid's down, it's heartbreaking to find these vid's showcasing a superior product only to find that there's no answer, and no salesman to contact, I was so lookin forward to buying one of these awesome lifts, good day guys, hope all is well.

[@jacobevans8365]

Finally I can park my motorcycle on the kitchen table

[@azmike3572]

Yep...the only concern would be the weight capacity of your table!

[@jimscycleandautotn8508]

​@@azmike3572you mean the "bones of the floor " anything else is just a given

[@mancrawford3932]

My brother and I purchased 2 of these during Biketoberfest 2019. It is a GREAT product. It is much more than a modified cherry picker. I am now able to drive into the garage because my bike is lifted high enough to park my car beneath. Maintenance and repairs are much easier and no more winter storage at the dealer. Once I realized how well it works all I could say is, "why didn't I think of this?" I say the same thing every time I think about the Pet Rock.

[@stwhite5135]

We don't have "Winter Storage" in Georgia. Another way for the dealer to get into your pocket.

[@ryanamey5024]

You park your car underneath this? Do you drive up over the two support arms for the lift? Or do you pull your car in and then wheel your bike and lift over your car?

[@whdbnrm3023]

@@ryanamey5024 Why not turn it 90 degrees to the car? The bike would be over the hood. The two support arms would be underneath the engine. Think outside the box. Also pour the creamer and sugar in the cup before you pour the coffee, no need to stir.

[@benjohnson3700]

Finally I can hang my bike to the ceiling and park my car under it.

[@BobSmith-mc7uq]

Unique!

[@Birdoneful]

Where do I buy this lift?

[@Info-Med]

How much PSI is needed from the compressor ?

[@freedom6919741]

Where do position the lift under the bike. Like location fro to back.

[@danaszalajeski4416]

That’s kinda cool, but I don’t see any real practical application for a bulky modified cherry picker being used as a motorcycle lift.

[@redram5150]

For the biker who likes storing his on a shelf in the off-season

[@robertdavis5495]

And never achieve a good nights sleep again

[@mestaves187]

Great product, makes me nervous having a bike that high though.

[@1995dresser]

The possibility of a fail with this to me is very high not just the bike falling but it falling on you also it uses a very large footprint in your garage for me I have a 89 dollar Craftsman motorcycle jack and a cycle pro table lift paid 549 for it about 15 yrs ago both do the job this thing is supposed to be 1600+

[@ChrisHornberger]

So don't buy it.

[@1995dresser]

@@ChrisHornberger Exactly

[@earljohnson54]

Okay how much is this and I live in Florida

[@wilsonmercado2287]

I love it

[@juniorregis9056]

That's cool.. Can it be used for sport bikes to?

[@TheRossillini]

😂

[@raymondpontremoli2489]

Who did the CG calculations.....????

[@louiewatson9389]

$1600... I'll stick with harbor freight.

[@jgarner1104]

For $1600 you can buy a really nice Derek Weaver Floor lift. I mean, who in their right mind puts 600+ pounds in the air that high, then unlocks the wheels and moves it around?

[@pdnetzer9561]

Cool

[@azmike3572]

Good clip, but on the next one, please have your videographer use a tripod. Eliminates camera motion.

[@blackice3395]

I want one!

[@edhickey3163]

what can possibly go wrong! LOL

[@vc9743]

One bad weld away from disaster.

[@lanlantheman]

I’m trying to understand how to work on the right side of the bike....? I mean it looks cool but I fail to see the need for it. Maybe if you had a museum and had bikes that needed storing but that’s a small market.

[@annemarie172]

You could turn the bike around and lift it from the other side.

[@motsetao]

@@annemarie172 You're too kool for skool.

[@nabielsuleiman7039]

Where did u get this lift so I can get one also …. Thanks

[@ChrisHornberger]

This video is done by the manufacturer.

[@kevincrookshanks2896]

How much?

[@millermatic140]

How do you actually buy this? The website has no option to buy unless I’m overlooking something

[@danielebrparish4271]

www.ultimatecyclelifts.com/

[@roberthawley735]

This link still does not provide a way to purchase any of your products.

[@garymartin1147]

This might not work so well on a bike with something lower than the frame such as an exhaust system or engine cases.

[@freebehindbars8654]

Nothing a little modification wouldn’t solve.

[@pomirtchi]

It's impossible to reach these guys out. No phone response, no email response.

[@zaheen96]

I have a cbr 1000 rr and it has a plastic piece underneath how can I lift it without removing that plastic, different lift?

[@accuratealloys]

Stick with Harbor Freight

[@braaptism6297]

You cant use this for a sportbike. I have a cbr 1000rr as well. You need a table lift for axel stands.

[@valtito9297]

someday!

[@rwes2940]

Did he really say strap it to the tour pack?

[@ChrisHornberger]

So that's more of a storage lift than a work lift, yeah? The wobble is *just* enough that I wouldn't want to be doing any real torquing on a bike, at least not at full height.

[@gerardlunow567]

That would be pneumatic . . .

[@fb510m]

looks like a cluster...

[@YahFllr]

What is the max weight limit?

[@whdbnrm3023]

saw it in person. They had a Electra glide all the way up on it. AND then, to the horror of it, two guys climbed all over the bike and lift.

[@jcnorris5083]

It's a PNEUMATIC hose, not a hydraulic hose.

[@hdfatboy123]

Junk straps, those always come loose !!! Ratchet straps would have been nice for that $$$

[@gnm109]

I guess it works but it's scary.

[@chiefjoseph8154]

Horizontal and vertical planes should never rise above balance.

[@martyjoseph9507]

I couldn't believe he rolled it with that center of gravity.

[@pitdawg6418]

Why would anyone need to lift their motorcycle that high?

[@scott917]

in a video he actually puts a suv hood under the bike.

[@davidhesse6847]

Make cleaning wheels & white walls easy..without breaking my back

[@CamiloSantana]

Abba sky lift. Done. Don't buy things designed in the USA and manufacturered in an Indonesian sweatshop 🙄

[@chrisc6874]

Fuck that! My 900 pound gold wing. I don't think so

[@sergemi3606]

Would suck if their were a unexpected earthquake... try explaining that to your insurance huh.... and now your out of pocket a few thousand.... plus youll need to safely untangle the mess....

[@phillips278]

Simply buy a harbor freight high lift for 1/5 the cost. This is such a useless overpriced contraption. Makes no sense to have your rig this high.They need to rename it to Ultimate Wallet vacuum.

[@chiefjoseph8154]

Would I trust this? No.