Rally Armor Mud Flap Install for 2022+ Subaru WRX

[@WrxJapanguy]

Did mying today throw away the instructions and just watch this cat here 💯

[@steve8803]

I just installed oem mud flaps on my 22 wrx. Up front the oem ones were easier to install. On the back, rally armor did a good job with that set up. The oem rears requires drilling out 4 holes.

[@azca.]

Thanks for heads up. I was planning on getting the oem ones but I don't want to drill so I'll get the rallyarmor ones

[@steve8803]

@@azca. the drill points are actually pre marked and you are only going through a thin bit of cladding. I would still go with OEM.

[@azca.]

oh, good to know. appreciate it!@@steve8803

[@imoffendedthatyouareoffended]

@@steve8803oem aren’t aggressive enough. Especially if your wheel setup is 20mm further than stock.

[@steve8803]

@@imoffendedthatyouareoffended you call aftermarket mudflaps aggressive, I call them gaudy. But, to each their own.

[@mattyrides]

These directions worked perfect! A million times better than trying to decipher the written instructions. I’m a little bummed though. There seems to be creases in the fender itself after tightening. Too tight??? 4:32

[@cendyliu]

kzbin.info/www/bejne/mH3Vd356o9d2p5Y

[@Ezio214]

Thanks for this! Much easier than reading the supplied instructions!

[@ImportImageRacing]

Thank you!

[@TurboDub1991]

The new mudflapz really pop!

[@ImportImageRacing]

Thank you! I think they do really set it off!

[@Rick4345]

I liked mine, Up to the point I lost the metal braces on the front. I replaced one side and sure enough, I lost the other side. I finally ended up putting on the oem version. So far I am very happy with them. Maybe I was doing something wrong.....Who knows.....

[@Lukinaification]

Probably just vibrated loose over time. I put a some Loctite blue threadlocker on them and that seems to be enough to keep them in place.

[@RobHTech]

The front use some cheap plastic bracket to brace it. I broke one installing them. POS. should be metal. IDK what the big deal is. RallyArmor could just make a metal piece instead. But I do like the looks of these much better.

[@RobHTech]

I ordered these with the altered lettering that are supposed to have the better brackets. I got a Rally Armor box with the correct part number and the regular flaps you see in this vid. The rear flaps do NOT fit like you see in this video. The middle hole of the rear does NOT line up with the OEM hold. You need to drill a new hole to make them fit correctly. The front fit fine.

[@rewthlessgaming9357]

Thanks for the video I couldn’t have gotten them on without this vid thank you so much👍👍👍🔥

[@ImportImageRacing]

That means a lot, thank you!

[@BuckleUpButtercupTV]

The look nice!

[@9MMSWORD]

Wait is this the same guy from the iag videos?

[@ImportImageRacing]

Why yes it’s Jim

[@BuckleUpGarage_]

Yep! That’s me 🤘🏻🤘🏻🤘🏻

[@StickerFab]

Digging it!

[@mikeyg6038]

Dope video nice and easy no bullshit

[@itskwis4767]

will this be the same process for the new era ones?

[@gregaleksandrovsky5806]

Hey guys, I bought myself the Splashguard kit, but I also want the mudflaps. The seemingly use the same holes for the most part. Do you think you can install both? Thanks!

[@johnb382s]

Of course Im the one person in all of the USA who gets a kit missing one of the foam spacers in my box 😑 so installed both front without them.

[@ImportImageRacing]

Have you reached out to [e-mail] for assistance?

[@headreddedstepchild6177]

I want these, but black with red letters. Is that possible

[@ImportImageRacing]

Heck yes it is! www.importimageracing.com/products/copy-of-rally-armor-ur-black-mud-flap-w-red-logo-subaru-wrx-2022-mf92-ur-blk-rd?variant=39541670838368

[@headreddedstepchild6177]

@@ImportImageRacing awesome, thank you! What happened to the discount that was on the ones in description?!

[@ImportImageRacing]

since everyone but us is sold out, the pricing auto-corrects to match the market. email me directly at [e-mail] and i'll create a custom quote for you ;)

[@KrayonTheKreator]

I'm having trouble with removing the screws on the front only 2 outta the 4 are coming out any ideas as to how to get the others out?

[@daneyoung7770]

If they're just spinning and not backing out, try to put a flat head screw driver at the base of the bolt while trying to remove it at the same time. Sometimes, these can get stuck in the plastic and need a little extra to get them back to the threads to back out.

[@losthope483]

What size are the mudflaps? Does anybody know a size

[@fredastaire6156]

I just got my mud flaps yesterday for my 2004 STi but it did not come with any metal brackets. Poor quality control. But at least they came in a cool “made in NYC” box 🤷🏽‍♂️

[@ImportImageRacing]

This is for the 22+ WRX mud flaps.

[@chrishutton3839]

Thumbs up my guy! The written instructions SUCK! This made the work fly bad though. Thank you so much!

[@EdwardSteadfast]

I love new VB content but… those just look dumb. Or “out of place” on this WRX. Those are for outback’s and foresters ..in my opinion. Mud flaps…. My VB sees no mud bro. 😂

[@ImportImageRacing]

Mine will be drifted on my offroad course so :)

[@EdwardSteadfast]

@@ImportImageRacing well. There’s that! ..video proof or it didn’t happen😁

[@ImportImageRacing]

@@EdwardSteadfast working on it. we just did some long travel suspension, once it gets here, we will change out the wheels/tires :)

[@noob.168]

buys a rally car and says it doesn't belong on mud...weird.

[@Robbiepowaa]

🤓

[@luistorres2809]

🥲 retain screws for me didnt come off .. just kept spinning fml