Ran into a problem stapling the aluminum roof panels 😆

[@stephenedwards2234]

That looks great I have a lot of aluminum panels never thought about covering with fabric for different applications great show

[@gregvidito3383]

Steel staples will react with aluminum. So each will corrode

[@davidconley3610]

Back again today to read the comments! Beats the hell out of anything I ever seen 😝

[@roypowell3450]

Thank you Jolene for not showing the complete push up routine!🥺

[@RobertSix-n4q]

Just keep doing what your doing .In the end It will be what you want.Dont care what negative comments say.

[@mikestorey6242]

Chad why do you ask jolene a question you did the complete opposite so why ask no need for that.

[@JeanFrenchinGambia]

@@mikestorey6242 maybe Jolene make an answer for complainers and Chad do that to Express his way like the boss

[@dugans2956]

Alot of hate but it's honestly a cool look inside alot of hand done work great job. so many people with dumb comments that can't duplicate it better.

[@DaDom07]

What a huge botch!

[@billysharp3388]

I am amazed it fits down so good not a bubble or wrinkle!👍

[@groundbeef662]

Every day more piss is taken. This is absolutely ridiculous now

[@smokindomain]

Why? Please explain the ridiculousness? His gotten a step closer to putting vinyl on the roof. It’s looking exactly how he imagined.. he ain’t building it for you mate.. try to relax..

[@mikestorey6242]

You did it again asked jolene and did the opposite

[@BigBlock-wf3mh]

This is Fina’s favourite part of the car, because it’s a “Roof, Roof, Roof!”

[@mikemiers5473]

Pounding on those staples does not put them in any deeper it gust flattens the top os the stapel.

[@gregoryp9217]

The wood is too hard for the staples

[@kbschulze]

Silly comment as if you are there. SMH

[@frankpagniello2254]

STEEL STAPLES WILL RUST AND BLEED ON FABRIC

[@michaelbristol6467]

Nah it's good. 😉✌️

[@edmundharkin9472]

Too right and he will really need to go over the entire roof completely sealing every joint possibly with fibreglass or something similar otherwise the staples will rust and come any fabric, inside and outside

[@BigDaddykik1973]

​@@edmundharkin9472he is going to put a soft top on it what part of that did you guys miss

[@BobFurman]

🤣

[@algreen2242]

I like it

[@dustinholt7308]

It just gets worse and worse over here 😂

[@JanetA-e6u]

Would you talk this way to your children or your spouse, you laughing hyena?

[@Junior-ts2ru]

Yet you keep watching. 😂

[@jaydubeck3435]

those Staples will never hold as they are not long enough and didn't go deep enough and on top of everything else they are the wrong kind of staple for that application they will eventually pop out like popcorn kernels in a hot pot....lol! Wood will dry out and shrink at some point and voila just like a nail in drywall I see you!

[@marcikrause3462]

How will they pop out when there is foam glued down on top of it and fabric stretched over it??????

[@NYPatternMaker]

@@marcikrause3462 Like how is foam suppose to hold staples down?

[@NYPatternMaker]

The only saving grace is the car will never see the road.

[@troymarable7537]

@NYPatternMakerwhat does it matter it’s not your car?🚗 I have an idea build a car and show us how it is done.😅😅😅😅

[@jaydubeck3435]

@@troymarable7537 I have an idea what does it matter to you what I or anyone else post. Also the comment is about using the wrong staples doufus and what does building a car have to do with that. You have no idea what you're watching do you, try to follow along if you can.

[@gregtrotchie1077]

open the window on the highway and the pressure will pop staples,

[@GregoryBamber]

I hope we're wrong but I'm inclined to agree.

[@ericbarlow5508]

This car will never be on the highway. Probably push it right into the “museum “ when the roof is finished .

[@Charlee-w1u]

You new here.🙂

[@TheAndyUK]

I thought the same as soon as the uber thin aluminium siding was mentioned. It’s fine making a 100% piece of art that sits in a garage forever. What’s wrong is pitching everything as some budget teaching aid in building a cheap “usable” hot rod as it 100% is not!

[@Timba-w7f]

​@@ericbarlow5508👍 I noticed you said "push" rather than "drive." 😂

[@junie1955]

Cover staples with alum vent tape so staples stay dry from moisture .

[@gregoryp9217]

I hope those staples are stanless ?

[@danieljanssen4580]

Sorry but the inside of the “headliner” looks like a ‘Vegas casino floor”

[@JeanFrenchinGambia]

@@danieljanssen4580 that why it's nice😉

[@Timba-w7f]

@@JeanFrenchinGambia ...not if one is laying face down on it! 😵

[@JeanFrenchinGambia]

@@Timba-w7f ....with a bite of glue everything is possible...🤭🎯

[@Timba-w7f]

@@JeanFrenchinGambia , yeah, glitter-glue, the poor man's metalflake! But don't "bite" the glue, use a "bit" of it.

[@JeanFrenchinGambia]

@Timba-w7f tes you are right 😅😉👋

[@mikemiers5473]

Thank you for watching another day of spaz chad😊

[@garrypritchard1658]

It must be embarrassing for jolean

[@michaelbristol6467]

Yeah you'd think you could spell her name right, how embarrassing! 😉✌️

[@job7016]

​@michaelbristol6467 ha ha ha ha good point!! 👍

[@Junior-ts2ru]

Pathetic comment 😂

[@brianreynolds5246]

She's gotta be like wtf

[@Larry-p4n]

No words???

[@WillemKriel-j2r]

It's that good🎉

[@JasmineJDMgirl]

Chaddles those metal staples will eventually come out 😊😊😊 you need the proper staples for this type of job 😉 👏 😀 😄 😊❤

[@darrenwilliams8222]

What about wind and speed 🤔

[@matthewbernhardt1987]

It doesn't run

[@ericbarlow5508]

Car will never make it out of the driveway probably unless it’s on a flatbed .

[@RobertLennon-gd4cw]

Don't have to worry about speed. The motor is fried. Car doesn't even run, but gotta git the roof done

[@SleepyUncleSam]

This car will never see the road, it will be thrown into the "shed of shame" in a few weeks to sit for years

[@Williamstegelman-c9v]

I'm seeing lots of comments about staples rust I'm in my 70s the staples will last longer then the vinyl factory has always used them great work Chad & Jolene see you tomorrow or next show have a great weekend

[@steve-rh5dv]

Between the aluminum and fabric, with 1/4"staples, he'd be lucky to get 1/8" penetration. Wrong staples, wrong stapler. Hitting them just deforms them. If that wood frame flexes at all when they put it on the car staples will pop!

[@kuunoo]

you are never gonna make a million dollar bugatti if this kind of tinkering is what you do on ford

[@derangedhermit2879]

Never? Hopefully Chad lives as long as Gene Winfield, & gets plenty of time to get to all his back burner projects, and creates 25 more!…👍🏼

[@NorthMemphisPhantom]

Still waiting on special made parts

[@csawrc1960]

Pushups still? Omg

[@daleturner7911]

Not only does that staple gun take a t-50 but the top of the gun is made for the palm of your hand to give a little bit more pressure and get it in deeper and straighter

[@Finnegan6674]

Use the piece of glass from the windshield that cracked to make the rear window. i know you can make a frame for it.

[@garryleeworthy3004]

Looks pretty good Chad. Are you going to cover the seams and staples with silicone or seam sealer? If I'm not mistaken, the staples will corrode over time if they get wet.

[@JeanFrenchinGambia]

Hi if it's not aluminum staples 😉👋

[@PeterDowd-r9b]

I have my doubts that the light staples will hold the roof together passing through the thin aluminun and carpet material. if you take a drive the wind pressure could possiblel lift the roof.

[@edwardberwind8544]

Another month or two and about 3000 pushups and we should be close to completion. Actually I like to watch these videos. It's Entertaiment to the max. A few people like what is being done, and most lose their minds at "what is going on , "what is going on", "and the reason being" "you take some and use it and throw the rest away" "But come back tomorrow and we will be here continuing this insanity" Stay tuned!

[@frunobulax1960]

Is he really serious about what he's doing? Or is it a video from the show "Hidden Camera"?

[@eric1evan21]

The Red Green Show, LOL

[@XanBos]

Well the glimpse that we got of the inside looked nice. The wood contrasting with the fabric worked. Pattern may have been a bit bold, but then again it still works. I am not sure about staples. Unless you are going to put something over the top to secure it all down, the staples will eventually give way. But I’m waiting to see the end results. You may have something else planned that we don’t see at the moment. I do have to go back to the wood frame, as it really looks good inside. Metal would not have been as pretty for sure.

[@fredselbman3319]

Curious to see if or what material he uses to cover the joint lines ? Please don’t leave the staples showing, it looks like the staples in my hips after my hip replacements 😅

[@garrypritchard1658]

He is covering it with a fabric cover

[@NYPatternMaker]

@@garrypritchard1658 Right... and there's a chance the staples will translate through the fabric.

[@BruceLucky-v9s]

This is like Bizarro world or something look at the bright side you can always take it off and throw it away

[@richurban659]

Yup monel or stainless staples and Heavy duty they are a heavier gage

[@johnx6020]

All it needs now is coffee can open headers, two bug light zapper headlights, bedazzled steering wheel and an umbrella.

[@Timba-w7f]

@@johnx6020 ,... glitter-glue is a crafter's best friend.

[@daleturner7911]

If you put your hand on top of the stapler and give it a little bit of a push that go in further

[@james_hangover9292]

Due to the push-ups, Bad has so much power that there's no need for extra push.

[@ferrucciopagliaro9163]

Why would you use a whole episode on just using the staple gun 🔫? Move on already 😑

[@jasondawson5969]

And the wrong staple gun...and staples!

[@GaryBaeshore]

I'm sure when it's done will look good. Not afraid to tackle anything. Go Chad.

[@craiglincoln4317]

Jolene looks fed up

[@paulgallichan3801]

Ok Dr Phil

[@craiglincoln4317]

@paulgallichan3801 sorry didnt know viewers needed your permission to comment

[@ablemarine9072]

Sad to see a rare vintage ford modified to make it worth much less money and not as Beautiful! But he owns it!! SADLY. A Staple gun with steel staples! Hmmmmm. Sure is gonna be great in the rain perhaps silver duct tape on the seams will git er dun!

[@GOPETSCOOTER]

Chad Chad Chad love you but sometimes it’s nice to listen to people with knowledge

[@scottulerick3581]

Looks like the whole episodes going to him showing everybody how to use a staple gun

[@Aaronlewis8846]

@scottulerick3581 this show is about showing every process of doing things. Yeah some of it can be tedious to you, but some of us enjoy learning something new, or if I didn't like it, i wouldn't use it.

[@dominicwood3750]

Should use the second hand to hold it tight to the material and use a long stainless steel staple and probably not side on across two panels as well.

[@SleepyUncleSam]

And he still don't know how to use it properly

[@arthurcormier2017]

What a joke

[@timerickson8895]

Yes you are

[@kennymckinnon4821]

It must not be because you keep commenting

[@lloydhillis6135]

Stainless Steel Staples I hope.

[@georgedow3482]

If all of you people making bad comments every episode dislike Chad so much why don't you stop watching him it's that simple.

[@mikeschauger5498]

Entertainment

[@james_hangover9292]

It's like a disease, trolls.

[@johnready630]

@@mikeschauger5498 Train wreck, you can't turn away !

[@gordonbezanson4710]

Everytime Chad starts something we are all complaining because we dont have the vision he has .Relax people. His money his time😬🖐

[@dral9657]

Some do have vision as well and they see what’s coming… I am one. I am really glad this roof is his money and his time .

[@leblanckerry4826]

Jolene 😍 you looked very nice today and great job as always Hey Fina❣️

[@josephdunn845]

I like the idea and the look, however the materials and the execution is awful. The staples the buckled panels, come on dude have some pride.

[@matthewleno4027]

Show us what you got Show us how you would build it. Armchair quarterback

[@bobmagill4379]

Staples will never come out because the car will never leave the garage

[@WillemKriel-j2r]

It was in a garage fore 30yers y not 30 more ,wise crake

[@dayslife]

1/4" staples are too short, holding by a hair, go over some more with 3/8

[@glennkimsey3957]

Not very nice i dont like it i hope it gets better

[@TheCharley53]

The reason Being is He needs a Stronger stapler not just a hand stapler!

[@tander1852]

Here again he’s not taking the advice of someone that knows. Derek told him he should use a air stapler for hard wood but no Chad thinks he knows it all and does what he wants and screws it up again

[@michaelpierce-yh7uf]

He has an air compressor, wtf ????​@@tander1852

[@jakejames1977]

I dont get it.???? . What is chad going to do put foam down and then cover it with vinyl. And a square back window? Should be ovel shaped. I don't know kind of a 💩 show.

[@Marvin_Pierce]

I would just like to say how much I enjoy watching. Great job to the both of you.

[@SteveGrey-f9g]

The old man specifically told you to use a pneumatic stapler, but no old cheapskate Chad messes it up again by being cheap. This is borderline pathetic. I think I only watch to see him cock up and then get upset with his 'haters' and carry of cocking up. I was watching Ian Roussel, and what a difference a mature attitude has. He takes criticism, doesn't diss anyone else and is streets ahead in the intelligence stakes.

[@DonTrishLayne]

Ian is a true artist, master.

[@bradleymckay365]

Chad and lifetime wood Smith told you to use a power stapler and even someone with 50 plus years of experience. You just won't take their advice. This is exactly why I don't like you, I respect your builds, but it's unbelievable how you treat others

[@markyaz901]

"Chad won't listen to me " whahhhhh. Poor baby....

[@derangedhermit2879]

How he treats others? As in the irrelevant commenters he ignores or times out altogether in chasing his visions & dreams in his usual fashion, that has made him a millionaire?…🤑

[@fredselbman3319]

He doesn’t take any advice because he’s not interested, he doesn’t even read them, this KZbin channel is all about how many views he gets, and views = $$$

[@Dani-Innit]

Just because you give someone advice doesnt mean they're required to listen, maybe they disagree. It's his vision, his build - leave it be.

[@michaelbristol6467]

😭

[@rickyrosenbauer3541]

man the way he keeps turning those pices around thers no way the pattern is going to line up most important i think

[@steve-rh5dv]

He uses patterns a lot, but he doesn't have the sense to mark their location & orientation. Half the video is him fussing with placement, which anyone with any sense (not to mention his years of experience) could easily avoid.

[@NYPatternMaker]

@@steve-rh5dv Chad doesn't have the inteligence to pattern match... he should have just used a solid color. I did pattern making and fabric cutting for 40+ years, and had to match patterns, stripes and checks all the time. If you don't it sticks out like a sore thumb, and is the sign of an amateur.

[@DanCrawford-tl5tc]

What a flippin joke 😂

[@DavidEthier-t9d]

The carson top idea is good Chad. I'm very disappointed because you removed the original windshield wiper at the top of the windshield and now with the chopped windshield and carson top, the windshield wiper can no longer be re-installed. You bypassed/eliminated a very important function of the car. Can't drive it in the rain. You've done this windshield wiper elimination on several cars.

[@scottdavies3914]

@@DavidEthier-t9d would never be driven in rain..he has forty cars that never get driven period…

[@DanCrawford-tl5tc]

Jolene must of demanded the material because she did the same with the Shoebox. It’s not a purse from Versace 😂

[@johnrzeszuto1827]

It does not add anything to the post with the push ups!!!!!!!!🤕😷

[@WillemKriel-j2r]

💪💪👌👌

[@josephpatrow]

It'll do as long as the car stays inside. Staples won't last in any kind of wind or driving down the highway. First drive, it's over. This part I can't get onboard with, guys. I've been a big fan since the beginning, but this isn't Chad's best work. How about some small self-driving scews at least?

[@michaelbristol6467]

It'll be fine, the foam padding and vinyl still go top to hold everything down tight. Once Floyd the pro upholster gets there he'll make sure of it. 😉✌️

[@virginiaman1960]

But it will look good parked in storage

[@timerickson8895]

How do you think convertible tops are fastened

[@WillemKriel-j2r]

It was inside fore 30 years,wy not 30more

[@WillemKriel-j2r]

​@@virginiaman1960it was in a garage for 30 years and nowe it's his

[@matthewbernhardt1987]

How to ruin a car in two weeks

[@knothead5217]

Says who?

[@michaelbristol6467]

How?

[@witchdoktor69]

What have you done in two weeks?

[@Aaronlewis8846]

@matthewbernhardt1987 how has he ruined this car? Do you really know how much money you're gonna spend making this car and original? Up to 100,000 dollars or more. Thats all he has done is chopped 3 inches off the windshield. Woopdeedoo. And he's building a roof that he wants. Just wait and see how it comes out in the end. They try to show the whole process of what they do in their shop

[@DanCrawford-tl5tc]

Man you can tell by the comments,, who the real custom car builders are because the people that think this is how you do it,,,don’t know how it should really be done 😊. Can’t take criticism from people that do it professionally every day. Maybe they should try getting off their recliner and put the cupcakes down and try doing a simple oil change. Probably can’t air up their own tire when it’s low. So there ya go. 😂

[@NealTerrebonne]

When the final fabric goes on, it will more than likely be attached in the same frame work so that the headliner will be secured again with pleats at the ribs. You’ll be fine. Wondering how many commenters have a Carson top for their ride. Proving once again, you can do it, with minimal skills and tools and have your own hotrod! Also, proved you can monetize 35,000 views with a few 2x4’s, a carpenter friend and the guts to produce daily content.

[@istvantoth3091]

disaster….

[@michaelbristol6467]

Where?

[@istvantoth3091]

@ everywhere

[@tomladuke7395]

Outstanding job, I love the material you both chose for the headliner, very aprapro for the era !

[@1fordtrimotor]

cloth material has a nap to it and needs to be installed in the same direction or it will not look like a match

[@jamespovoas8976]

Is this the million dollar car your building 😂

[@kennethguyatt5295]

Please stop the push-ups.

[@bmw19877]

I just do not know what he is doing the pushups. When he starts on them now, I just shut the post off.

[@OhYeah-me1cg]

@@bmw19877 True. And I give a thumbs down until he stops.

[@CurtisRoyArt]

Clue ~ turn it off when he stops talking.

[@WillemKriel-j2r]

Wy his show please stop whatshing 💩💩😘

[@DeanWatanabe-b4k]

Maybe do a few pushups a day, don’t let the old man in! It makes you feel better too😊

[@chrisfournier6144]

That roof will pull itself apart once the car is on the road. The flexing and twisting will back out those staples very quickly. Perhaps crown staple with a pneumatic stapler would have been better... Glue wouldn't have hurt either. The roofline is super square and not terribly attractive at the c pillar.

[@fredfreeman7975]

This car will never see the road.

[@drearynodoff515]

You could always use the Bad chad stick on chrome to hide all the bent staples?

[@boblewis7987]

looks like the bottom of my box-spring on my bed--sorry

[@markplant2184]

Chad, you really need to listen to Jolene. She said you had the shorter pieces in wrong place, you said they would fit either place but got puckered....hmmm.

[@BJA1980]

More doing, less yap and push ups...enough of the triple checking and rechecking like an obsessed ice addict... more Jolleen input and ideas would be great too..

[@RogerFleury-rh9wr]

Looks awful. Inside and out.

[@mikegoodman447]

Wood worker told him to get a air stapler for the ash hardwood. Amazing how much time he spent aligning the panels and never look inside to see what was being created with the material patterns.

[@deeblevins516]

Looks like the carpet in my great grandma's bothroom!

[@rogerbaldwinson3008]

Looks like someone stuck their old living room carpet on the roof.

[@NewWhirledSlacker42]

Imagine going down the freeway, opening the window and those aluminum sheets start swinging inside the car like a giant in sink disposer. Bad ideas on top of bad ideas.

[@mikegoodman447]

He has yet to get it running. But air catching the panels is something I have not thought about. Good thinking!

[@RudolphMoore-vu2xr]

Not with the convertible material stapled holding everything down 😊

[@istvantoth3091]

It’s getting close to the Fred Flintstone car…..

[@derangedhermit2879]

As it should, the “King of Kustomizers", George Barris built the world famous Flintstone car…🤩

[@WillemKriel-j2r]

His good brou🤐🤙

[@Timba-w7f]

@@istvantoth3091 ...because no motor?

[@istvantoth3091]

@@Timba-w7f it’s just getting worse

[@Timba-w7f]

@@istvantoth3091 ...yeah, I realized I get more enjoyment out of the comments than by watching and listening to Chad.

[@ThomasHoltje]

do the math 1/8 of a inch in oak good luck it never b in the wind 22:39 22:41

[@pcmgpaulandmelissa7371]

The rear window looks homemade square.. you should make it wider or even ovel would be the best look .. just call a guy that does top on cars ,find out what they use... please use somesort of canvase..for the top ... dont use foam from home hardware...lol

[@DanSmith-cb5vj]

​@pcmgpaulandmelissa7371 , actually window opening is a rectangle shape.

[@rfdonetwo31]

Another nice unmolested antique car ruined . WHY do I watch this ?

[@matthewleno4027]

Go save one bud

[@WillemKriel-j2r]

🐓🐓🤣

[@jasondawson5969]

Morbid curiosity.

[@patrickjameskorfman5161]

that stapler may not work an air stapler is much better

[@youwouldneversaythatinperson]

That fabric looks fantastic! The entire roof matches the spirit of the car beautifully, better than original for certain. Thanks for showing us whats possible.

[@donsinclair-q7q]

I like the roof on the car, it will look really good when finished. A lot of work went into this part of the project. Thank you Chad and Jolene for sharing this with us.

[@TheIIOM]

I'm not sure that foam is a good choice because it isnt durable in sun, heat and cold conditions. Might look at a felt or furniture pad that is fiber. This waybthe final layer/surface may retain its shape and lines better.

[@jeromepitcher5002]

One of Chads biggest things is showing one Does Not Need a Big Shop full of Expensive tools to do a project . love it Chad n Jo.

[@jodycopeland1]

Leave the pushups off and we will have more content

[@jimschraven4717]

I like the process and like all the other projects you’ve done, you’ll work this out also. Great job!

[@ruanecrummett9261]

That roofs gonna fly off like a toupee on hot summer day nail it down man .

[@faucetman]

Like all of chads cars they are not for driving, but just to look at from 20 feet away.

[@benroman7149]

Good thing I'm starting to watch DD's speed shop cuz it showed chad a few things or two about not being a fool the nasty ugliest headliner I ever seen and thank you Jolene for not showing Chad doing his push-ups we don't give a hoot if you can get them or not

[@richardlecouffe5579]

Chad is one of those guys who thinks he knows everything the problem with that he is full of himself wake up richard moncton

[@derangedhermit2879]

This comment is the very definition of projection…😖

[@JeanFrenchinGambia]

​@@derangedhermit2879 or maybe you don't understand what he is doing and resolving things by himself...learn and see the result...the best way for me to find other and different ways... not only deranged hermit but also obtuse 🤯🤭

[@Aaronlewis8846]

Don't be a douche Richard.

[@JeanFrenchinGambia]

​@@derangedhermit2879 sorry I made a mistake it was not for you but RichardI'm totally agree with you ...king of bad joke and tired🙇‍♂️🤭👏

[@JeanFrenchinGambia]

Complainers are like that without psychology ...projection 🤯

[@NYPatternMaker]

Another "I told you so"... none of the pattern in the fabric pieces matches up. Looks like crap.

[@derangedhermit2879]

😂😆🤣

[@eddiereeher7594]

Good show, good job.enjoyed watching.cary on 😎👍

[@warrenaffleck5960]

hand stapler not a good idea-1/4" crown stapler run by the air compressor

[@ford8467]

Should of used 3/8 staples would of anchored it better!

[@gerrycomfort7027]

A AT END IT WORK ALL CHAD HE VERE GOOD YOU SEE HIM LIVE ALL TIME WEN HE SHOW YOU

[@gerrycomfort7027]

COOL MAN THANK YOU BUT STOP

[@Hhllbb2476]

I have it on 2x playback speed and it’s too long.

[@stanleyroper5942]

In my 50 yrs, I can't remember how many times I've driven......... while looking at my headliner