Ran Out Of Heating Oil? Don’t just keep hitting the reset!

[@LLCNet21]

It is easy to fix. After getting some oil. If it is a two line system, reset usually works after two attempts. Take that long to get the air out of the line. If it is a single line system open the bleeder and hit the reset, it will bleed the air out.

[@BKWhite07]

as long as there's not a vacuum leak or restriction that makes it seem as if its an out of oil situation

[@namewithheld7835]

Love the "pay us to fix it" Videos

[@DaveDocDIY]

I wouldn’t say this is that. I’m not a boiler guy. I’d say it’s more of a “know what you’re messing with can go very wrong” situation.

[@unknownbostonian]

If u hit the reset button and then grab a paperclip jump out both F terminals to bypass safety while you need to prime to prevent lockout.

[@thelion7929]

The thermostat probably isn't on and that's most likely the issue.

[@AmericanFarmerHVAC2024]

The things can blow up if they get enough oil in there

[@JR-kr1lv]

Looking to use eye to prime the system without pressing the button

[@dc6233]

If a homeowner hits that button more than 2 times, or has to hit it once every few weeks, it's time to change filters, replace the nozzle and have a tech perform an efficiency test. You are only wasting money and endangering your family, oil is dirty, keep the unit clean...

[@DaveDocDIY]

Absolutely!!

[@unknownbostonian]

Everybody forgets that there is a 3rd strainer and its inside the mini pump. Its a ssc109 strainer.

[@monicat4205]

Thanks for this. It's 1030pm, it's 16°F outside and I hit the reset 3 times before looking it up on YT 🤦‍♀️ I didn't realize it was shooting oil each time. I added 6 gallons diesel but I'm going to go get more hoping that helps. The oil furnace company is bringing more tomorrow but it keeps going on and off still despite the 6 gallons I added. There are no lights lit up at all though. Makes me think I need more fuel. Maybe I should just shut down the big breaker for the night?

[@DaveDocDIY]

The line needs to be purged. There reason it won’t light is because it’s most likely catching air pockets!

[@BKWhite07]

sounds like something else. but I'm sure you got it resolved by now

[@EODagon]

Smoke pipe looks like it's rotted at the seam

[@NowlEspinosa]

Where is the oil reservoir locared?

[@Zoe_yard]

What’s the other small button on the bottom?

[@CB0915]

We just hit it second time in a week and a half. Fuckin stupid we have a bit more than a qtr of tank of oil too. Why is this happening?

[@DaveDocDIY]

Must be air in the line! Needs to be purged.

[@CB0915]

@@DaveDocDIY professional came out today and fixed w part that was old. He said everything ran nicely. Was only literally $10 for the part… phew.

[@tomhughes4980]

Isn't that a boiler?

[@tomdale1313]

true story

[@jackshahood2764]

Hate to be that guy.... but thats a boiler, and the control is sideways.

[@DaveDocDIY]

No you’re definitely right, I have a habit of calling a boiler a furnace so I’ll check myself!! 😂

[@jackshahood2764]

@@DaveDocDIY hahah love what your doing man. Keep it up.

[@unknownbostonian]

It can be mounted any way. I personally rather have all controls mounted on the wall

[@johncarter1205]

I keep my tank full and combine with electric

[@Huntersprojects]

How do I tell if my tank is empty we got home and it wasn’t heating its calling but I pressed the button twice it does ignite I tap on the tank and it’s sounds dry as a bone

[@DaveDocDIY]

You should have a gauge on your tank. Look around the top!

[@Huntersprojects]

@@DaveDocDIY I have two I’m not sure they work

[@RichWil]

Go Phil’s

[@BaconJD420]

Bro that’s a boiler not a furnace

[@FUYouTubeCensors]

My big red button is much bigger and much more powerful yours! And my button works!

[@perryfree3903]

Well the brand new Beckett Genesis ignition modules you can hook your phone up to it with Bluetooth and see exactly how many times the reset button had been hit always ask the homeowner I just want to see if they lie to me