Range Rover Classic Wood Veneer: How to Restore the real wood trim in your classic car. Part 1

[@brittanylevinson741]

I really enjoy your narration! A lot of other channels are so hyped up and includes too much extraneous information. Love your approach!

[@AlexBeras]

Thank you! That means the world!!

[@mohamedgerald5045]

i guess Im kinda off topic but does anyone know of a good site to stream newly released movies online ?

[@shaunhewitt]

That first bit you broke off looked like a hedgehog underneath 😂

[@iyadboolos]

best video online I've seen,much respect. I'm gonna follow your lead sir, thank you!

[@pawpawbandit3871]

thanks for the video; I think you did great but I agree with the other comment that personally don't recommend using any chemicals that strong in general for environmental health reasons; someone else suggested more heat to help peeling, so I'll probably try that.

[@AlexBeras]

Yeah! The chemicals are extremely harsh!!

[@pawpawbandit3871]

@@AlexBeras I just spent all day with a knife just to chip the plastic off (and veneer; I had all the veneer, but it came off with the plastic too much, and I had a split horizontally, so I kinda wanted a fresh surface anyway. I want to say Burled Walnut or something is this veneer type? thanks again for the video though- if nothing else it made me not be lazy.

[@yurakovalec7292]

My adventure with woodworking started with Woodglut.

[@AlexBeras]

Absolutely!!

[@yurakovalec7292]

@@AlexBeras 💝

[@michaelreece458]

Excellent, nicely done.

[@fideldelgado2619]

Hi Alex, what brand of the methylene chloride did you use? can only see the back of the can. Ty - great job!

[@AlexBeras]

fidel delgado Thank you!! The product is- (Rock Miracle: Since 1936- Paint & Varnish Remover) Id say wear a mask while using the stuff because it’s potent, but it seems like masks are here for a while! 😂🤷🏾‍♂️

[@fideldelgado2619]

@@AlexBeras Thanks

[@w124mercedes7]

It is much better to use a heat gun to soften the old laquer finish. Paint stripper can loosen the adhesive of the veneer Plus the veneer stakes up the stripper and will cause the new clear finish to come loose. This is how not to refinish veneer. When done right the new finish will flow out without bubbles or discoloration. That was caused by stripper absorbed in the veneer.

[@iamu]

Polyurethane bicomponent layer is the way to go. And needs some sanding before

[@AlexBeras]

Walkin' Droid it was a ton of sanding!

[@tarekeljurdi2344]

How many layers of clear quote are required?

[@AlexBeras]

I did about four coats. But I also let it cure in between. I then wet sanded and polished to get a flatter glass like finish.

[@tisoy909]

I think you could have put sanding sealer before the poly.

[@AlexBeras]

tisoy909 if I get a chance to redo another wood panel, I’ll take your recommendation!👍🏾

[@arturzbrzezny1310]

😂😂😂😂😂 I have never seen such poor restoration.

[@AlexBeras]

Ehhh, I tried!

[@jachinloi5066]

Wear mask and gloves

[@AlexBeras]

I agree! Hindsight is 20/20. The fumes were not lung friendly! 😷