Rare Polaris RZR Secondary Clutch Issue

[@LeroyJB]

Another great video for a potential problem. I've checked mine once since switching to round pugs and thick belt. All was well but I will continue to check. Thanks again for looking out for us RZR owners.

[@zachdavis1490]

Thank you for the video, I just had this happen and this video helped my out.

[@philbricks]

Excellent info!!!

[@shanewillaims]

Can a clutch cause the drivetrain to lock up holding back on a hill. Mine is making loud noise on decel and drivetrain locked up and put in neutral and would role and then took back off

[@Hunterworks]

yes it can, we have troubleshooting videos for both clutches you can watch

[@shanewillaims]

@@Hunterworks thank you

[@geneflook5424]

I have the same problem

[@juancarlosmedinamendoza1810]

Hello friend, blessings, I just got a Rzr xp1000 but I didn't test it well when I bought it and until now I realized that it doesn't go over 50mph, what could I do? Please help

[@Hunterworks]

You have a primary clutch issue, find our how to troubleshoot a primary clutch video and go through it

[@bigtruxz]

Another option to pressing in the hat would be throw it in your freezer for a day or two (make sure the wife doesn't see it). Quickly coat with Retaining Compound and slide it in. Also, I might look into Loctite 641. Has a smaller gap fill and higher temp rating than 620. Shear strength is less with 641, but that shouldn't be a factor.

[@Hunterworks]

As mentioned in the video, a way not necessarily the way and this way is another way too. Thanks

[@bigtruxz]

@@Hunterworks Absolutely agree, more than 1 way to skin a cat. Thanks for all of your videos.

[@patd4u2]

Good comment, you beat me to it, put the hat into the freezer like you said and also put the clutch housing into the oven at around 200° for an hour and then quickly push it in. The hat will shrink a little and the clutch will expand.

[@nicholaswatts7631]

So when I try to torque my secondary down, the top hat spins and makes it near impossible. What could be the cause for this? Thanks.

[@Hunterworks]

If the clutch is staying still and this is happening, only two possibilities and that is, not on all the way or something broke on the spider

[@trell374]

My 2021 Polaris rzr xp 4 1000 is making a noise now from the clutch area, will a thick belt fix the problem? I haven’t had my first service yet.

[@Derick9772]

Did ever figure it out I have a 21 as well making that noise actually started after I changed belts

[@trell374]

Yes the belt was not tight after I got the belt tightened up the noise stopped.

[@coyotekelly7143]

To bad there isn't a replacement one with a tiny circlip on the back!

[@mrhtx97]

Is this the same for a highlifter edition

[@Hunterworks]

if a 17 and newer yes

[@Bean-sz7sr]

Any major issue's with a 2020 Xp turbo clutches?

[@Hunterworks]

I would not know, we have a much smaller dealing with turbo's but I do not think they have major malfunctions other than the plastic slides in them wearing

[@Bean-sz7sr]

@@Hunterworks Thanks👍

[@Richard-gy1fo]

52 isn't old bubba. Lol im 53 and now i feel old.

[@Hunterworks]

Is to my 20 year old son

[@Richard-gy1fo]

Same.