K20z1 vs k20a2 part 3 how to make more power

[@A91xK24]

Im curious how the last runner isnt melting your harness, Recently picked up a civic with a K swap and its pretty damn close in that area!

[@isaacprovan1965]

Hi there, is there any way you can go I. Detail on how you made the charge harness for a k20z3 swap into an eg. I watched your previous videos on you swapping it into the aztech green coupe, but couldn’t find the part where you made it and integrated it with the 05-06 rsx engine harness. In the process of making my eg hatch k swapped and having trouble on that one part. Please and thank you, love the vids, keep pumping the vids out 🙏🏽

[@rarewitit7899]

I have Honda del sol k24 and Honda Civic ekk2 that has 05-06 harness conversion install

[@chrisstratton3430]

I wish folks would be more K24A4 stuff. It's only a 40 HP diff and VTEC hits at 2750. The Torque is on right off idle.

[@rarewitit7899]

True but no top end power

[@devonthedude2]

i have the same in my eg hatch only the japanese version k24a, and the i vtec at 2750 isnt the same vtec system as the sport models, its missing exhaust lobes and like rare said the top end power just isnt there.

[@jesselee4405]

ONLY a 40hp difference lol. That's a lot of lower difference in a Honda.

[@isaacprovan1965]

That’s great I’m checking it out rn! Appreciate it, one more thing, when doing the k20z3 swap in an eg, did you use the stock slave cylinder that was on the engine or did you use another k series one?

[@rarewitit7899]

On my green coupe , I used s2000

[@raysb240sx]

Awesome video, what jumper/ conversion harness would you recommend for a 05 rsx-s engine harness....using a 05 accord ecu with ktuner?.

[@rarewitit7899]

I believe wireworx makes a harness for 05-06 , but you can use 02-04 conversion harness and repin it , like it did on the bard k20a2 bard hatch

[@mattrada9897]

i just bought a rsx type s with the z1. has a spun bearing. do i need to get another z1 bottom end or can i go a2 bottom and everything is the same?

[@rarewitit7899]

To be honest the a2 and z1 is basically the same , the cam is what really separates them z1 having a type r cam

[@egclt]

I like to hear comparison on the k20z3 because that is what I have in my integra

[@rarewitit7899]

Ok I will do a vid soon

[@egclt]

@@rarewitit7899 sweet love the videos man!!

[@jesselee4405]

The Z3 cylinder head shares the same exhaust cam as the A2, but has it's own unique intake cam, I think similar to the pre-06 TSX intake cam is I remember correctly. The Z3 comes with the infamous RBC intake plenum, something I installed on my k24/k20 build--It sounds better and performs better than the one found on any of the RSX's. The Z3 has a slower spinning oil pump, with a balance shaft that robs 2-3hp apparently. The Z3 cams are better than the 02-04 RSX-S camshafts, but not as good as the cams in the 05-06 RSX-S. I also read there's a 'bump' in one of the ports of the Z3 head that disrupts airflow to some extent. Anyway, K is the WAY!!!

[@MiSCHiEF_BassMusic]

Hey I jus bought k20z1 in ontario I heard its possible to make 300hp with jus a 4 piston head and skunk2 intake manifold with just stock k20z1 internals.

[@rarewitit7899]

If you have the supporting mods I would say it’s possible

[@MiSCHiEF_BassMusic]

@@rarewitit7899 i have fully built Del sol pci aluminum tie rod, compliance bracket, tow links, rear trailing arm bracket, upper & lower control spherical suspension, blox aluminum spherical traction, greedy exhaust, bigger fuel pump, bigger abraided fuel lines, on 13s inch rims

[@l10n79]

Hey I am looking at 2002-06 RSX Type-S. Is it worth it to get a 2002-04 and get K20A or 05-06 with K20Z1? Online the older K20s are more expensive, but easier to mod, as I have seen online. Would you say you can make 400-600 hp with K20Z1 with not a crazy amount of money 10-15k?

[@rarewitit7899]

K20a2 k20z1 basically the same just type r cams in the z1 , the transmission slight different also z1 has 4.7 final drive and a2 has 4.3

[@Corrupted_Bear]

Awesome video

[@rarewitit7899]

Thank you for watching

[@ezequiel3328]

Can i run a hondata kpro v4 for a a2 02-04 in a z1 05-06 only with the jumper?

[@rarewitit7899]

Yea

[@ezequiel3328]

@@rarewitit7899 Hondata says it won't work, do you know if it's true or it's just to sell the z1 version more expensive?

[@boostedrr7205]

Hey I have a f23 and I’m using a stock 1995 civic single core radiator, it’s a turbo car. I was wondering how is the cooking compactor with a single core radiator. Does it over heat at all ?

[@rarewitit7899]

Not sure never done a f23 swap

[@boostedrr7205]

@@rarewitit7899 does the k24 overheat at all with the radiator in it ?

[@rarewitit7899]

Works good with stock radiator

[@boostedrr7205]

@@rarewitit7899 alright thank you

[@bpoman1234]

hi what tensioner and cover did you go with I have a 07 tsx motor going in a 96 hatchback is there any way to use the harness and ecm from the 07 tsx I will also need a manual transmission what do you recommend .daily driving.

[@rarewitit7899]

Just used a stock tensioner and cover , you can’t use harness and Ecu , you can use Rsx transmission

[@bpoman1234]

with stock alternator do I the ac delete kit?

[@rarewitit7899]

Yea

[@rarewitit7899]

I have a video on my channel that shows you everything

[@bpoman1234]

@@rarewitit7899 man thanks bless besafe.

[@jesselee4405]

Anyone know if I can run fd2 type R pistons in my jdm k24a, z1(prb)head engine without having p to v issues? I really need lsd in my kfrank RSX-S. Spinning around corners and over undulations spinning sucks. It kills the driving experience lol

[@rarewitit7899]

Fd2 pistons too small , I would get some aftermarket 12.5.1 ,but to be honest if you already have k24 just drop 50 degree vtc and type r fd2 oil pump and you will be good ,z1 head not gonna give you that much power really , also install rbc or rrc manifold you’ll be good

[@jesselee4405]

@@rarewitit7899 I have the rbc intake and 50 degree vtc from the prb head. it put down 224hp and 183tq 91 octance

[@Jspechtchrare]

@@jesselee4405 which oil pump you using

[@jesselee4405]

@@Jspechtchrare it's from my type s

[@garyphloyngam7148]

No cap u sound like Jessie’s little brother from fast and furious 😆

[@rarewitit7899]

Lmao