The Differences Between Honda K-Series Engines

[@omarramirez8776]

This series as a whole is gearing up to be the defining moments where kids will learn about K Swaps. Thank you for the details and effort!

[@milanmastracci]

You are so welcome!

[@morganater1232]

I’m literally here trying to learn how to K Swap 😂

[@johnjerizlopezignacio3891]

milanmastracci just wanna say im one of those "kids" huehuehue

[@Someguyto]

@@milanmastracci Will these fit in an older civic? Such a 1994 Civic?

[@GabeNahirny]

"The K series doesn't need an introduction" *Still introduces the K series* LOL.

[@majze3027]

The fuckery ,lmao just playing tho no hate 😂

[@corollavirus4age]

IMMA TELL YA ANYWAYS!

[@CyTaux]

It would seem very ignorant and unprofessional if he didn't explain after making that joke to people who don't really know what they are

[@NYGSucksButDex_]

The first portion of the video is called “introduction” LMAO

[@bandsinhands5677]

The rsx is so admirable my friend has one and he’s going to put a k24 in it

[@Rightchuare]

The first K20 for the US market was in the RSX in 2002, the K20a2 came in the Type S, I bought one in March 2002 and have been driving it daily since then, I’m up to 454,000 miles on the original motor, original water pump, oil pump, timing chain, with only needing the valve adjustments, I honestly feel that the transmissions can’t hold up to these engines, I’m on my second trans, great video and helpful information

[@lindaover9764]

Wow. Are you still running?

[@johnlilley9363]

Update?

[@aOTritoN]

Just bought a k24a accord from the OG owner with 566k miles Everything works and runs good other than VVT solenoid being bad about to swap that now hopefully it fixes it

[@Rightchuare]

@@aOTritoN nice, good luck with it and just have the valves checked for adjustment considering the mileage

[@aOTritoN]

@@Rightchuare thanks for that info, I plan on doing timing chain since it's original, any other recommendations? Besides valves? Vtec solenoid did fix it btw

[@newfie_1129]

I love how you even mentioned the Element! I own a Element, a Civic, a V6 accord and a Ridgeline. If you can’t tell I love my Honda’s!😂

[@milanmastracci]

Honda love ❤️

[@Supadupa335]

I'll sell you my Honda magna. It's in great shape still

[@tomcooper5188]

I own a 2003 Element currently with 440k miles on original engine. Any idea which K series engine it has? Thanks

[@craigwiess1656]

06 Element, 05 Odyssey , 84 Goldwing and a few CB750K SOHC. 71,72 and 76.

[@craigwiess1656]

@@tomcooper5188 K24A4

[@endlessfable]

The exhaust cam does not phase on the K series unless it’s a K20C1 from the Fk2/8 .. phasing on the exhaust side was introduced on the L15b7 and K20C1

[@CorruptInfinityOfficial]

I was also going to bring this up, that’s what the term is used for and it must have been a script error or something because he mentioned not all of them had it on the exhaust. Before that statement

[@nickthelebo]

3rd'ed

[@Samir2164]

I got a K24a in my EP3. Made 221hp to the wheels with 2.50 inch exhaust, 50 degree VTC, RBC intake manifold and a 3 inch intake. With a bigger exhaust and a head package these motors can easily make 250 to the wheels with no problem. Looking forward to seeing your build progress.

[@milanmastracci]

I believe it! 300+ hp is capable from the 2.4L 👍

[@rock-uu7qr]

So it’s not stock?

[@kristoffer3000]

That's not stock lol

[@Samir2164]

@@kristoffer3000 stock internals*

[@Samir2164]

@@rock-uu7qr 👺

[@bankruptsee]

"I don't want to deal with the turbo headaches"... bro these motors love boost. You're shorting yourself if you don't boost it.

[@Mr.Thermistor7228]

Right lmao of course the mini Cooper gave him turbo problems lol turbo problems hardly exist with k series engines

[@pospc2]

He managed to say Zee and Zed in the same vid.

[@te71se]

Canadians can't make up their mind if they want to please the British or the Americans.

[@pospc2]

@@te71se😆. As an American I personally like and use both myself. So I'm happy with either. 😃

[@GunSnob]

Was cringing at this the whole time.

[@RandomlnternetGuy]

@@te71se or french lol

[@JuicyJLee]

I am South African. Americans zeeeebra while we say zHAIRbra

[@johnnybabee9095]

Nice vid, good info. I had a 2008 SI with the K20Z3 and it was the best sounding stock 4 cylinder engine I have ever heard. WOT at 7000-9000 rpms was insane!!

[@milanmastracci]

Yeah buddy I believe it!! Throw a K24 bottom end on that thing and it would be a seriously fun car, with torque lol

[@SyahmieIsmade]

Very clear speech, in-depth knowledge and a very clear camera work. A+ content.

[@milanmastracci]

Thank you!! 🙌

[@ianmanger7754]

Great informational video! Keep them coming! One correction, at 3:23 you mentioned the model cast into the block "RAA 2." The 2 is actually the die number it was cast on, not the model revision.

[@sqeekykleen49]

That's good to know 😮

[@michaelpereira2888]

K24z7 owner here, excited to see you build this. I got a spare one in my garage I want to throw in a teg in the future. People think the r40 won't make power, I think they just haven't seen one yet. 🙏🏾🙌🏾💪🏾🔥

[@milanmastracci]

Do it! Prove them wrong!! The only R40 parts that I'm really reusing are from the bottom end: the block, the crank, the oil pan, and wiring. That's about it lol

[@projectz5394]

When I had my accord I ran k24a4 block with k24a2 (TSX) Head as well as k24a2 (type-S) Oil pump. When going this route you need to remember that the pistons need to be good with K24a2 TSX Head and not run into what's called a Valve to piston contact. So much fun back then,

[@uveradandiaz917]

Hi there, I do have a 2006 honda accord engine that I would like to modify so I can hace true vtec set up, what heads should be my best options? Thank you

[@IdrisFashan]

DOOD! Working the shot out of my 2009 TSX. Just got CP pistons, alpha header (cat delete), flashpro (tuning next month), light flywheel and performance clutch, waiting on my cold air intake and looking at skunk2 manifold to finish it off. YOU ARE AN INSPIRATION!!! Here’s to 300 horses, man 🍻

[@SERGMOTIVEGARAGE]

Bro, honda doesn't use a VTC exhaust cam gear. VTC actuation is only controlled on the intake side which is why you can switch from 25 degree VTC gear to the 50 degree gear. Only way you can change cam timing on the exhaust side is with a adjustable exhaust cam gear.

[@milanmastracci]

Maybe I'll have to rip that cam sprocket apart. I am going to be switching to a 40 degree gear for my intake I know that. I'm still learning as I go. I know that the fuel in my area will be the only drawback since E85 isn't readily available.

[@vladdutz20]

Good comment, i have pointed that above in a comment, it is easy to spot that vtc is used on the intake side only because when you removed the camshafts from the k24a2 block you could see that there are 2 oil passages under your left hand for the intake, used for advancing and retarding the timing, but only one passage on the exhaust side used for lubrication. Also if you inspect the sprockets closely you can see that the intake one has a ridge because it is made of 2 sliding pieces, whereas the exhaust one is a solid block, even if it has about the same thickness. It is thicker for balancing the 3 lobe pairs that are heavier than a single cam design

[@HarleySLA]

I agree with you, on the engines we're looking at here. But Honda has definitely used variable valve timing on the exhaust side in other engines. The reason why was to eliminate the need for an EGR. Learned that at Honda school, kind of an interesting approach to emissions. Not nitpicking your comment, just thought someone might find it interesting because I definitely did when I learned about it. Cheers 🍻

[@falken_gt4]

Alway been a B Series or H Series guy but just got a 2004 CL7 Euro R and am swatting up on K Series now, great video with simple but valuable info, thanks!

[@Aplixys]

Hey Milan, I am Brendan from cometic gasket, just so you know, we also make every other top end gasket for this thing!

[@milanmastracci]

Hey Brendan, I'll have to keep that in mind. My head gasket from you guys just came in 👍 thanks again!

[@patarmon2867]

I also have an 8th gen Coupe and I've seen little bits here and there across the forums about the Frankenstein build. I'm really excited to see a good, detailed, quality series following the build for this car.

[@milanmastracci]

Right on! 🙌

[@evodingo3375]

Will definitely be following this build ! Thank you for taking the time out to explain all this.

[@milanmastracci]

My pleasure!

[@tonymontana9421]

@@milanmastracci I need help with what I need for my swap jdm k24a ef si other than the mounts harness ecu axles

[@nickrah1737]

I have had a kia, 2 nissans, and a toyota and all of them gave me problems at one point. But i have owned 5 Hondas and they are just amazing the engines just run nonstop with zero problems you just need to keep up with basic maintenance.i have said it before and ill say it again i will be a Honda driver for LIFE they are the best!

[@SIRICKO]

There is no headaches when boosting A honda.

[@itsreallytheo]

SI RICKO finding the right tuner to make it last and not cheap out on parts if you’re boosting stock? Correct me if I’m wrong

[@bradperez3649]

@@itsreallytheo it's also not cheap to "build" an NA engine then get it tuned. Typically it's only 200$ more to tune on boost vs NA. IF THAT

[@john-martin]

The right tuner is the most important part. Im going 4 years on the same tune same/headgasket/build. 400 plus whp on 91 octane. Daily driven/tow vehicle.

[@josecoreas554]

TheoMusic978 you can boost a k24 up to 500hp on stock internals with no issues. After that you will start getting problems.

[@Virt7_]

Na is a waste

[@zunojose]

You just simplified this process for us. Once your series is over ill try to do the same on a spare k24z7 i got

[@milanmastracci]

Sounds like a plan! 👊

[@frying_Nimbus]

Do you know if the K24A2 is a direct bolt on to the k24Z7 bottom end?

[@erikk27a]

All u gotta know is that the best k series is out of a 06-08 Tsx. The k24a2. Amazing engine.

[@anthonye3680]

Why is it those years, would like to know since I have been looking at tsx

[@colbydavis2244]

@@anthonye3680 The cams are better in 06-08

[@anthonye3680]

@@colbydavis2244 thanks for the reply, better cams so a bit better power. I feel as a father that sold his EG hatch to find a more family friendly car and loves Honda Acura my next car would be a tsx or RDX.. leaning more to TSX since it's double wishbone and more fun to drive.

[@redcatxb125]

Good info! The crank pos sensor difference is pretty reminiscent of the Honda H series DOHC motors, on those, the usdm obd2 h22a4’s use a similar setup except the crank pos sensor bolts onto the oil pump which is bolted to the front bottom of the block. On jdm h22/23 they use a crank angle sensor which is in the middle of the back of the block reading the crank between cyl 2 and 3. For that reason any jdm h series swap will likely require transfer of a usdm oil pump for the CKP sensor

[@sirhaney]

The Frankenstein only runs into problems without a tune- it drops your compression about 1/2 a value (12.5:1 vs 12.0:1)

[@Nebbia_affaraccimiei]

still mismatching head and bore it's not great. machine the head to suit, then yes :)

[@noblewon3507]

Yeah the k24a2 and k20z3 head is a pretty bad ass set up. Tune is the biggest factor when running it. Got to upgrade the oil pump at that time or the k20 head is basically useless because the k24 doesn't have the reving ability without it. so there would be really no sense in pairing it with a K20 head unless you upgraded the pump as well. Even then you can't get the full potential out of the k20z3 head , you have to be careful of the VTC degree.

[@corbinyoung5320]

@@noblewon3507 what is the VTC degree

[@noblewon3507]

@@corbinyoung5320 the VTC is the gear on the intake cam. It's also known as a cam phaser. If you're not running the right degree you could possibly make contact between the valve and pistons

[@noblewon3507]

You normally have a tuned for 45°

[@bobstuke5352]

Hi Milan, is there a video of the build process? I wanted to see what all you did to assemble the components. Thanks, great stuff!

[@joshthompson7642]

2000 si didn't come with a Kseries.

[@MP-xe1mv]

Josh Thompson early 2000’s he said and yes ep3 hatchback k20a3 aswell as base acura rsx

[@milanmastracci]

Honda introduced the 2001 Honda CTR in the year 2000 and was available to the public BEFORE the year 2001.

[@joshthompson7642]

Kool I heard 2000 si which didn't.

[@ape9094]

The em1 si had a b16a2

[@boostedctr5173]

The 2000 si It came with a b16 in us market

[@zTheBigFishz]

Great stuff. I'm having a JDM ITR K20 swapped into a Fiat X1/9. I'm pretty stoked.

[@kseriesdan9722]

What's the kerb weight of one of them?

[@looslimb]

Man, cant wait to see how this goes! I have been doing some research as I have a 2012 Accord Coupe with an automatic transmission and I have been chomping at the bit to do a high performance motor build for it. Working on the stereo right now, but I cannot wait to get parts for the motor! Thanks, I am looking forward to this build

[@milanmastracci]

Thanks brother! I appreciate it. Well hopefully by the time you're done your audio stuff, I'll have this engine tighter and can let you know what to do, and what to avoid 💪

[@stevesonger1]

I did the same and now I never turn that nice stereo on.

[@daveclark8337]

It's too much time, money and effort to put a K24 into such a heavy car. Just sell it and buy a V6 with a stick. Or I don't know why he doesn't just put that built K24 into an RSX, which weighs like 500 lbs less than an Accord.

[@looslimb]

@@daveclark8337 Traded the 2012 for a 2022 Accord Touring Hybrid, so not worried about the swap anymore.

[@DIABOLICOHAVOC]

Finally, someone cleared up the difference between the K24 blocks! It's a good thing you're staying away from the "Frankenstein" setup. The high compression is not worth the headache of oil consumption, or blown valve seals. I learned my lesson with a B20-VTC.

[@milanmastracci]

I'm going with a higher compression piston than what was in my accord. Stock for me is 10.5:1

[@lindaover9764]

I've been running a tuned and bolted frank for five years now. Not one single issue.

[@DIABOLICOHAVOC]

@@lindaover9764 you're an exception, not the rule. That's why you always see B20 vtech swapped cars for sale left and right, shortly after the swap.

[@lindaover9764]

@@DIABOLICOHAVOC I haven't heard any issues mating a k20 head to a k24 block. That's what I'm running

[@DIABOLICOHAVOC]

@@lindaover9764 oh, I was referring to the B20 VTech. I don't have any experience with the k series Frankenstein.

[@chch83p]

Cool~! I'm so excited 300HP.

[@terrysukairain2335]

This cleared so many things. New to Honda and their engines. I feel far more confident in doing my engine swap

[@milanmastracci]

Happy to help Terry! Good luck with your swap

[@argen809]

I think you’re gonna need some drag cartel cams if you want 300 or at least some higher compression like 12.1

[@milanmastracci]

Yes you are right!

[@kevinsal96]

Difference is simple K20A2,K20A,K20Z3,K20Z1 heads are better but lower displacement. And K24 heads are lower tier but it has more displacement. Also if you want serious power don’t go for A3 heads. Best combo so far is K24Z7 short block and K20Z3 or K20A2. Thats the best bang for buck you can get. K20A ofc is better but it’s more expensive.

[@drkvegeta]

Finally! I have a 9th gen civic si and I was looking into doing this and I can't find it anywhere, so thank you! Also I made 232hp 183tq on my 9th gen, k24z7 however I want to get vtec on my exhaust and intake so I finally find you with all this!

[@anthonyhernandez1953]

Cloud Thomas I have the exact same situation, I have a 14’ si coupe , but I miss having true vtec!

[@milanmastracci]

Well hopefully this video series is exactly what you're looking for! What mods do you have that got you to those power figures?

[@drkvegeta]

@@milanmastracci have a look the mods in the description of my video kzbin.info/www/bejne/fIarfXWBi6uVY7c

[@drkvegeta]

@@anthonyhernandez1953 ye bro, I had a db8 type r when I was living in Florida a couple years ago, it had a b18c it was a right hand drive real jdm just a 4 door to the dc 2 and I boosted it, made over 400 but I end up blowing the motor lol, anyways I came out of the fast car life for awhile, was too expensive, but now I'm slowly in it again, but like you said miss tru vtec, I made some good numbers on my si but want tru vtec😭 lol Have a look kzbin.info/www/bejne/fIarfXWBi6uVY7c

[@milanmastracci]

Damn I had no clue that car existed!! That's sweet. Well if all goes well, you'll have a full tutorial on how to get a bunch more power from your 9th gen 💪 btw I saw the dyno video.. sounds healthy!

[@-NOGOODRACING-]

This is going to be super fun! Euro chassis with Honda Engine=rev all day long and bullet proof!

[@chapstickevo]

181k on my K20a2

[@MultiLittlegamer]

444,350 KM on my k24a2 in my Element.

[@MurpheeLaw]

Dude, THANK YOU! I am considering a Short Block replacement for my K20A2. Either K24 or another K20. (2002 RSX Type S.). It's lost compression from 190 down to 110-120. I feel like it's more cost effective to simply replace the short block with a new one. Go from there. I had Bolt Ons on it previously, and never got to tune it. This time around, 10 years later, I'm going to do it right and finish what I started.

[@kseries20-24only]

Love these videos! Keep up the good work 😉 question, curious if you had considered doing a J - series swap for your Accord? I am investigating a J35A8 swap for a TL

[@8PSIandUp]

J series share same mount points. People j37 swap 8th gen accords and make more power with a stock tune.

[@jeffreydeleon5630]

Exactly the build I want to do. I have a 09 tsx with the k24z3. I have a spare engine at my shop. All I need to do is source a k24a2 head which isn’t a big deal down here in so Florida. Looking forward on this build 🙌🏼

[@DougSJBrooks]

have the government closed your schools too ? if so i am guessing there will be a few more videos coming soon :)

[@milanmastracci]

Yes they've closed, but assignments and take home exams are a thing! I'm going to be done school as of March 30th

[@somersetbassett4580]

just getting into tuning/upgrading my Honda, really appreciate your channel 👍

[@thatguyslush5779]

All the info I needed, thanks man.

[@philipbahia924]

I like the way he explains the difference in performance,I'd rather go all motor if I do a K24 setup,thank you for your Knowledge.

[@samster978]

love the detail in your videos keep the vids coming!

[@milanmastracci]

Thanks Sammy! I appreciate it 👊

[@bbuny10]

I have an 03 Element, and this is exactly the kind of info I was looking for a video on. Liked and subscribed

[@erendyalatorre7785]

Swapping k24 into my B12 Sentra

[@Honja999]

This is my dream build. N/A stroked k24 (k27) 400-500hp fully gutted eg hatch on race gas/e85 😍

[@milanmastracci]

Looks like someone has heard of the company 4P 😏

[@truth4reel]

400-500 na? Nah pipe dream.

[@luisdavinci1023]

300whp na would be insane

[@CLozs]

Luis Ayala i’ve nvr seen tht from a 4 banger that does not have forced induction

[@Phar2Rekliss]

@@CLozs it's possible! Heres a dude who builds amazing engines. 330hp NA! K24 with K20 head Frankenstein build! kzbin.info/www/bejne/b4jGkKSVacefr9k

[@dylanandersen9318]

4piston racing got 500hp to the wheels NA a few years back on a k24 platform. Granted, there was nothing factory left on it, still insane nonetheless

[@pacific7775]

@@CLozs theres thousands of them driving around. A 300whp k24 isnt hard its simple build

[@CLozs]

Phar2Rekliss sick ass 8th gen but that’s probably way more money then building it with forced induction

[@millenniumzeek]

Awesome vid and loved the intro. Correction about the K20Z, the Z1 was introduced in 2005 on the RSX-S

[@millenniumzeek]

also, the K20Z3 from the 2006 Si lost the manual throttle cable for dbw, gained RBC intake manifold and balance shaft that robbed high rpm HP.

[@ИскренАпостолов]

Damn, wish I had your knowledge and skill bro. I have a 2009 Honda Accord/Acura TSX with the same K24Z3 Engine. And I wish to make more power - 250-280 HP , something like that and to be able to smoke some cocky friends with their 3.0 turbo diesel german garbage cars.

[@milanmastracci]

YESSSS I love it!!! Well in theory you can get that done with using OEM parts only, but a head swap will be almost necessary. You may be able to use your Z3 head with some upgrades like cams and valves, but the dual VTEC paired with the other things mentioned in this video WITH higher compression pistons will allow me to get that... fingers crossed

[@jaymesp95]

Искрен Апостолов should of got a CL9

[@bonifacijus11]

sure sure, boi, tell me when you get at least 260crankHP on 98oct/93oct(us) with your build!

[@bonifacijus11]

Iskren, menshe slushaj takix mechtatelej i divannyx tiunerov;p

[@ИскренАпостолов]

bonifacijus11 she ti kaja brate

[@protectyourcar5889]

Done rebuilt k24bottom end! K20head will be nice. +Powdercoat red vault cover ... will look sick.

[@marvinreyes6270]

K24a block rbc2 head how is the performance

[@kidscope886]

I have a k24z7 in my si does anyone know how much HP i can get out of a build engine ?

[@milanmastracci]

I've seen guys straight up switch heads and nothing else, and get to 260whp after tuning.

[@brettcook2292]

milanmastracci maybe with full bolt ons too haha

[@1188clean]

how much money you got? skys the limit if you got deep pockets

[@donkerbolls]

I didnt want to be a honda guy but i ended up dailying a 2006 k24 accord coupe with only 80k miles on it, standard transmission, still only abt 2 years into owning the car and my god i feel like im gonna have to make that a project one day

[@fayenwolf]

K24A4: "What about me guys?" :(

[@bretthansen8166]

I have the K20C2, there is absolutely NO aftermarket support for my engine :(

[@matthewmcdonald9107]

This is alot of information. I will have to save this video and watch many times to absorb this. Thank you for sharing your knowledge ❤

[@seankaine2411]

I made 314 all motor hp on pump gas and then 340hp on M5 fuel. I have a k24A rbb bottom end and a k20z1 head.

[@erendyalatorre7785]

That is sick my man I'm gonna swap one of these bad boys into my B12 sentra. How much did your build cost you?

[@seankaine2411]

@@erendyalatorre7785 7k

[@staypositive4358]

Bro, I learned so much about Honda engines watching this video. I have no intention of replacing my Accord's engine but this was very educational! Thank you!

[@denniskennedy534]

I'd like to buy a motor for ²⁰⁰ dollars

[@calebbruce2673]

You ain't lyin shit they are all closer to 1k nowadays

[@u_n_c_l_e_m_i_s_o]

NA builds are life, you just earned a sub.

[@Slickpete83]

grade A++ content !!!!

[@vando1267]

milanmastracci, great content as always! One piece of unsolicited advice is to purchase a new RBC VTC to ensure you don’t get the dreaded VTC rattle on cold start. I bought a used one for my TSX and encountered that rattle a couple months after the install. Call it cheap insurance, but buying a new one could save you some headache and will net you more low to midrange power over the stock 25 degree VTC from the TSX. I believe the VTC from the 09 TSX is a 50 degree one, so you may not need to modify an existing RBC VTC to 45 degrees.

[@milanmastracci]

That's a good idea! The only engine parts that I will be reusing for my build is the crankshaft, the engine block, the oil pan, the cylinder head, and the cylinder head tower. Everything else will be upgraded, including the VTC actuator. I have a custom one going in this engine.

[@pgtmr2713]

Someone should make an inline 6 based on the K-series. Imagine an aftermarket replacement for 2J's and RB's and Honda based. 3.6L, smoother, still high rpm.

[@knoxbom3274]

I pretty much have 2 builds going on. My first one is a k24a1 CR-V bottom end with a K20z3 head with the head being completed except for the cams and the second build is a k24a2 TSX engine getting ready to tear down the block

[@Ryan-wf1mn]

Never seen a K come in any odyssey in the states. That’s just silly!

[@milanmastracci]

I never said in the states it was available, just like how the JDM CTR was available for purchase in the year 2000.

[@SHADOWBONELESS]

Odyssey in Asian market use K , they are very different car to our Odysseys.

[@ahrred3127]

Wait, What You Guys Get In The States?

[@Ransack777]

@@ahrred3127 J35's in our Odysseys.

[@climax_6629]

Ryan Mahon they are in the Honda Odyssey Absolute from Japan

[@madgreek253]

Great clear and precise explanations of the differences between the different K series. I have both an 04 and an 09TSX and was wondering what the difference was between the 2 engines. The 09 is definitely easier and cleaner to do an oil change on thats for sure.

[@climax_6629]

Hawks Fan the cams on the 04 tsx is better than the 09 , it got RBB head when the 09 doesn’t.

[@Scypher0th]

love the fact you going N/A boosting is nothign but headaches and pains in the ass...constant boost leaks and tuning bullcrap along with loss of reliability, more shit to break. N/A ALL THE WAY EVERY DAY!

[@connoisseuroftigolbitts]

Boosting is only a headache if u don’t do it the right way. It’s Not about only slapping a turbo without all supporting mods to engine and fuel management Cheap Build= Cheap Results

[@AutoBodyEverything]

Verrrry good boy!!!! I’m subbed. Great job! Please keep this up with the k series demographic it’s a very big n growing community.

[@feliperosario3574]

How can you compare a boosted almighty Honda to a Mini. Shame on you and your soul.

[@puregsr]

Man, I'm so out of touch after I sold my Integra GSR long time ago. I still remember all the negative press and response from the B-series community when RSX came out.

[@nicselectronics81]

Love my k24a8 (176k miles), just put on the 06'+ TSX intake manifold highly recommend 👌runs like a top.

[@4boost-461]

Which is the best series a and z ?

[@adammuirhead1]

Very simple and concise video that explains a lot of information. Great job sir!

[@GianniAdduci]

Glad you are keeping it simple and going NA this time around.

[@milanmastracci]

Yeah me too! I'm hoping to keep it as reliable as its been for the past 235k kilometres..

[@Yuugata31]

I'd like to know where I can get a good motor for "a couple hundred bucks". Lol. Good video man. Thanks for highlighting the differences.

[@vladybuilds6670]

Cool video.... appreciated the work to compair. Mention the 50 degree cam sprocket the gives the k24 a jolt of Hp... if you know about it...

[@mrstealyoblocks4473]

Some great info here....just about to pick up my first JDM vehicle... 2007 Odyssey Absolute with a K24A. Planning on Hondata and supercharging. Just not sure what header I can run on this thing.

[@JuneWentToSki]

I know this is well late I hope you can reply, I know you had to have the machine shop modify the block for the k24a on the newer Z block . So would you need to modify the k24a block for the newer k24 Z style head? Or would the head have to be modified? Or would no changes need to be made?

[@Rightchuare]

Their last video was a year ago so let's see if they stay true to their followers

[@milanmastracci]

Thank you guys for correcting me. The "VTC actuator" for the exhaust is not what I said it is. Honda only has VTC on the intake sprocket. If you have any ideas why the exhaust sprocket is thicker and not just a regular gear, please enlighten me! The more ya know :)

[@chaserevstuning9271]

It's cause it helps with balancing of the cam so when vtec happens it's not harsh and is more smooth.

[@brandongz8942]

Nice video , just bought a new k24a2 for my 04 tsx so I’m excited for ur build x)

[@ericsantiago9294]

Great video. Can you answer this question?? I bought a K24A, no number after the A. Do you know what car this came out of?? Thank you!

[@milanmastracci]

That sounds like a JDM engine, not from North America.

[@prvs2004]

The K series seem to have a major issue with exhaust camshafts getting pitted. I had four different vehicles babied from day one having this issue. If one has religiously done oil changes and used synthetic it just delays the issue post 150K if not then it hits between 80K and 120K (Honda recommends adjusting valve lashes at 110K this is when most discover the issue). Most Honda forums claim this was an issue between 2003 -2004/5 but I have seen this issue post-2007. Honda engines are not like what they used to be.

[@JoseAlexanderSantillan]

Great content. Seems like a k24a2 head can also swap onto my Si's k24z7 🤔

[@frying_Nimbus]

I’ve been researching this for months, I know you can do it with a stock block and internals from the 9th gen SI. Do you know what modifications are needed to bolt the head on?

[@4EverSuzuki]

Are you planning on porting the K24a2 head? I know one of the main reasons people generally like to get the a2/z1 heads is because of the flow capabilities vs the K24a2.

[@milanmastracci]

Yes I will be. Stock, it isn't the BEST flowing head, however with it ported, it flows very well

[@chetanjiva8874]

The research and work done here is impressive. The explanation is great. I don’t have a Honda but like your video. Thanks

[@milanmastracci]

Awesome, thank you!

[@castronovab123]

The engine wasn’t introduced until 2001

[@ZeroFX32]

Wow more than three years ago, how did I miss this? Awesome video as always!! I think you need to get another 370z and a topgunz rotrex kit, it's super easy to install and believe me it's a beast of a car. NA 370z feels like a chevy aveo after you get used to the boosted version.

[@adrianrangel2038]

You inspired me to build my Accord it’s an auto but all motor and smashin 💪🏽

[@ghfjfghjasdfasdf]

Awesome video, thanks for sharing! Subbed What I’ll never understand is why Honda builds their motors so conservatively.

[@Ajon83]

For durability. It looks better when most of the hondas on the road have 300k miles when compared to other vehicles.

[@ghfjfghjasdfasdf]

Why won’t they make a RWD or AWD 4 cyl V-Tech setup that’s aggressively tuned around the 3-400 hp and 3-350 tq and charge 40-50k? Can they not profit from that? I’d buy that in a heartbeat!

[@ghfjfghjasdfasdf]

Or do the same thing with a 6!

[@4touchdowns1game29]

Do a series on what d-series motors can hold the most boost before they blow up

[@viduranisal]

First time seeing the channel, this is EPIC!! Keep up the awesome work and content, great recommendation!

[@ZimaletaMotors]

Learned allot, a like from me, was a subscriber already

[@milanmastracci]

Thank you!! 🙌

[@MurpheeLaw]

OH, also, I was kind'a drunkies, so I came back on KZbin to watch PBS Space time and have my mind blown, but I saw this and watched it instead. Legit not disappointed.

[@h2oguydro738]

I have a 2005 Honda CRV would like to do a KZ series swap, would you know if the KZ would bolt up to the CRV automatic transmission?

[@jojofire12]

I have the same car! Did you do it/did you find more info in our engine?

[@gamingwith8k]

2008 Crv 👀

[@MrAccordj30]

Great content I Love my Accords and Hondas in general can’t wait to see your coupe built I’m sure it’s gonna be epic!

[@RowynDaily]

I want that K24a to my GK5 in the future.

[@miguelcuriel5691]

Hey thanks for the breakdown on the k series, super helpful to me just cause I always wondered why the k24 head is better with the k20 bottom and viseversa

[@edgara9316]

Other way round buddy. The k24 bottom end goes with the k20 head. The k20 head is more refined and better flowing.

[@chrispietersen804]

Nice detailed description.. Love it! Good Job

[@milanmastracci]

Glad you liked it! Thanks ✌️

[@scratchymaster]

Excellent lighting in your garage!

[@milanmastracci]

Thanks!

[@sinegra30]

Thank you, so far the most complete info about K series

[@milanmastracci]

I'm glad you found it informative 👍

[@MrGodzukie80]

Good video I was just wondering why no one uses the k23 from the Acura RDX It makes decent power in that heavy suv

[@ryansterling4226]

Because the K23 has effectively a J Series bellhousing cast and effectively a matching J Series bellhousing bolt pattern on the engine block, so it's not a straight forward engine to use for 4 cylinder K Series builds. It requires lots of custom work and parts to make it work in any car that was originally any other Honda inline 4. However, one advantage the K23 turbo from the RDX has is that since it has a J Series bellhousing bolt pattern, you can take a J Series 6 speed manual and with a little work you can build a strong setup with the taller overall gears the J Series 6 speeds have compared to the K Series 6 speeds, and you can take an LSD out of any Acura J Series 6 speed manual and have the ring gear modified to adapt the Acura LSD to fit, which that way you retain the Honda Accord 6-6's 3.55 FD and have the Acura LSD with it instead of the Acura J Series LSD which is a ~3.27 FD. The Honda Accord 6-6's torqueier 3.55 FD will give you stronger acceleration versus the Acura ~3.27 which will accelerate a bit slower (especially off the line) bit has a slight advantage in total top speed potential due to the taller FD gear. So if you're going for lower rpm at freeway cruising, the Acura FD gear is better, as well as if you're doing a higher horsepower build and trying to go for an even higher total top speed. Otherwise the 6-6 Accord's 3.55 FD gear wins in every other regard for performance. Anyways, the RDX turbo K23 has very limited aftermarket support, which is the main reason it's not a sought after engine to build, also it's rather uncommon since it was a much lower total production volume than any K24 series vehicle, and the K24's (no matter if it's the A series K24's [K24A2/4/8] or the Z series K24's [K24Z2/3/7] such as what's found in Accords and TSX's) are much better supported by the aftermarket.