Raspberry Pi Linux Lesson 4: Creating and Editing Files with Nano Command

[@tonysvideos]

This is great, I bought a Raspberry Pi 3 a few weeks ago, I've been having problems following tutorials as they all seem to assume that everyone is an expert, I found your video perfect for me as a beginner, I'm going to watch all of them. Fantastic work!

[@duniajahansaraasman1997]

Cost?

[@Constitutionallycorrect]

i have learned more about linux from your videos so far than I have ever been able to learn....you are definitely an amazing person and I definitely recognize your worth

[@andrewbeaver7384]

Paul, these are wonderful videos! I've done things in retropie I never ever would have been able to do without the knowledge contained here!

[@claraaralc]

I was needing to write code for a sensor from my pi as a complete beginner... Your video is a godsend - thank you!

[@dukanvasnygg]

Great Video! I have begun my journey with the raspberry pi 3 after finishing all of your new videos on the Arduino kit. Love how you really start at the basics, and implement practice without going to fast. Keep it up Paul!

[@paulmunro3050]

I'm an absolute beginner, your videos are very helpful

[@ancapftw9113]

I just got a pi4 so I could learn Linux. I'll need to watch this whole series now.

[@spokes783]

Same here

[@commenter4799]

I broke my Pi so I bought a $25 240G SSD to use with Linux, lol.

[@cahoon2504]

Amazing classes so much more useful then everything else I've found yet. Thank you!

[@vogelfotografie1]

Hi Paul, I have my Raspberry Pi 4 and follow your tutorial from The Netherlands and verry happy whit this tutorial. Thanks Paul

[@roadglide100]

Thanks. I’m new to Linux and RPi. I learned a lot from you. Great presentation. Thank you. Great job

[@aynursunagatullin7029]

Thank you Mr. McWorther I learnt a lot in this lesson such as the mkdir and rmdir, and of course the nano and cat commands, and I also learnt a lot about cats and dogs haha.

[@erygion]

Great basics tutorial Mr. Mcwhorter. I'm going to go through all your tutorials, why not lol. I can't wait to get deep in this. Thank you sir. You're a great teacher!

[@dechercatalin9492]

Great videos you are an awesome professor, great info and teaching skills.

[@cibelless510]

you are the best.....very good lesson and excellent teacher......

[@iswoo10]

I want to thank you for taking your valuable time in making this excellent tutorials.

[@TooOldToScrum]

These are great first principle lessons and build layer on layer.

[@mansourmed6961]

your tutorails like a steps of the stairs , we start from the bottom and we are in the TOP

[@Eng.Mohammad_Alotaiby]

hello ms. Paul ... im mohammad from Saudi Arabia ... im happy to be on of your students . thanks a lot for Raspberry Pi & arduino and everything your doing .. your a good men ... love you mr. paul

[@FluffyToaster1]

I got my Raspberry Pi 3 the other day. I used to be very intimidated be the terminal. Now I can't stop having to much fun following along with your great videos!!! P.S. I also like dogs a lot better than cats. :D

[@thronabulax]

Today I pleased to learn what will happen after I die. I find it easier to remember the Linux commands if I understand what they are abbreviations of. Some are obvious, but others not so obvious. For example: ls - list pwd - path of working directory cd - change directory mkdir-make directory rmdir-remove directory cp-copy mv-move nano-???? doesn't mean anything, except that it is a replacement for pico another small text editor cat-conCATenate and print file sudo-SuperUserDo etc...

[@mbunds]

PWD = "Print Working Directory"

[@christinaspil8519]

THANK YOU!! I was really trying to understand where it comes from in order to remember it!!

[@nelsonorozco4569]

excellent explanation method. thanks very much

[@GAment_11]

I enjoyed your cat / dog rant. Excited for vid 5!

[@anghelalexandru9373]

Still very useful. Thank you!

[@ochienoeliud5723]

Pretty nice and cool guides to get up and move on..

[@richard_wenner]

You are spot on with your comments about faithful dogs and deceitful cats. I also like the fact that you keep your mis-typing in the video (great learning tool - as every student shouts at the screen). What about a REAL challenge for the next video series 'Cat Whispering'?

[@paulmcwhorter]

Funny you should bring up cats. Something has been bothering my chickens at night, so I put out a live trap. I go out this morning and what do I find in my live trap? A house cat. So the mystery was solved, it was the neighborhood cat that has been disrupting the domestic tranquility of my chickens. Hence, I prepared to dispatch the cat, but at the last moment my wife came out and granted to the cat a pardon, so the cat was released instead of being shot. My wife is not a cat lover, but yet somehow she came under the influence of the cat, and hence I was not allowed to properly dispatch the cat.

[@richard_wenner]

Another option is to place a GPS tracker on the cat (not the wife (they HATE that!)) - some of their wanderings can be quite surprising!

[@sela4720]

Excellent video, thanks a lot. Great teacher!! :)

[@johncharles81]

You are awesome 👏 I love your video’s. Very easy to follow along 😯Thank you very much....👍🌠🌠🌠🌠🌠

[@dmeadows11]

Just Fantastic a whole new World

[@JorgeJimenez2020]

Good lesson, I learned about cats too! :). I've never been a cat person either, now I think I know what vibe I was getting... Lol

[@babykilla999666]

wonderful video!! very informative! greatly appreciated

[@butchh4004]

The " Raphael Kit for Raspberry Pi " came in to day , jammed packed full of goodies. Q: In your lesson 1 for the Pi . In location :On the Panel/Menu Bar click The pi icon - Preferences - Theme and And Appearance .In the window labeled "Customize Look and Feel ". There is no Tab labeled [ Window Border ]. Can you advise .

[@paulmcwhorter]

I am on the Buster operating system. You probably flashed to a newer version after I made the video. Download and flash the Buster operating system and you will have exactly what I have.

[@butchh4004]

@@paulmcwhorter Thanks I well give it a go

[@mdnobi]

hi, how to copy data from files (which converted to txt format from excel file) into nano? any advice...thanks

[@beomseokpark1500]

You know I love your lecture, and I'm learning so fast thank to you. But can't agree on your thoughtanout cat

[@RupavaBaruah]

Great Explanation Sir....just that its over explained. This is not a college lecture so we can just rewind and pay back if we missed anything. Overall great tutorial but I had to skip most of it to complete it

[@brettswiferose50]

you are great I wish I would have seen your tutorials before...I corrupted at least 4 times my micros lol

[@brettswiferose50]

ok question...I went through all the steps with you...Step by Step and downloaded raspian but it did not take me to the config page. How do I get there? sudo config?

[@saylechen5058]

when I write the command sudo shutdown, but forgot the rest of "-h now", now it gives no response. what should I do to restart my raspberry pi

[@horse433]

Nice lesson and I love the dog story. I'm going to have to put my dog down in a couple weeks. I grew up with her. It's extremely sad

[@TheArchaeus6]

Aside from the great tutorial, what you're saying is.. Cats are smarter than dogs and would survive longer because of their disloyal ingenuity :)

[@permanentlypatriotic]

Super helpful!

[@Xxshadowsnipe]

You are fantastic. I would hope you're a professor of some sort. You have great skills for a professor I can tell you that much

[@muratmetin3057]

how can I remove the blank line in the nano

[@jimjimf7534]

really nice job!thank you a lot!really descriptive!! :)

[@williampelletiervslol1949]

#ask can you do cls insteed of clear like in cmd

[@mcpitala]

Paul, awesome video's...Question: When you saved "my_dogs.txt", could you have saved it as "my_dogs.py" to run it as a script from the saved file..Thanks much!

[@lipitalikibab]

Very useful lessons. Maybe a bit long videos but funny anyway. I laughed a lot with cats comments

[@unikron]

little sweet is a sweet name. I'm naming something that ASAP!

[@capistor1]

perfect for beginners

[@tomadams1066]

It would be helpful to learn how to open the games. I am trying to learn how to open a CNC program called bCNC. Thanks

[@fusauce5962]

So, not a cat person then Paul? :-) Thanks for the tutorials, great intro to linux on raspi

[@joymakerRC]

wow. so many cat ladies hate you right now Paul, lol, thanks for everything , now have done fusion360, arduino, python, and working raspi,

[@bathulachandan3773]

Hello Mr. Paul. I am student of masters in bio-medical engineering. My project is to send the data (wireless via wlan) that i receive from the sensors of a patient simulator to the PC. i have like 4 different kinds of sensors. I am new to raspberry pi systems. Currently am using raspberry pi 3 for my project. I have to initially test with some data if i can transfer the information wireless to my laptop. It would be of great help if you could help me with some information regarding my project.

[@hassinayaz7310]

your cat vs dog story was great :D ... but alas!!! we have to use that cat command to open a file though :/ :P

[@what_is_myname1289]

Hey, I learned something new about cats today, lol

[@patdossenko1820]

thsnk you

[@ryansfamily]

Thanks! Hope my cat doesn't eat my arm when i'm sleeping. If I die it has permission though.

[@paulmcwhorter]

Oh no, another cat lover!

[@Canada434]

Great job Sir

[@yuangao9731]

But how to copy and paste, just like in windows?

[@TechDark]

First, you have to physically go in to the GUI desktop on the raspberry pi and go to the file manager there😊

[@ritheshmanikandan6006]

20:21 you wrote /py/ instead of /pi/

[@mbunds]

LS = "List System"

[@CatGuyTX]

FYI, when I was young, I attended Travis Jr. High, now called Travis Middle School in Temple, TX. I also was a newspaper carrier on So. 19th. For a few days, there was this terrible smell in the 1300 block of So. 19th. Then someone discovered what it was! The lady had died in her back yard, and her dogs were eating her! So much for the domestication theory.... Put dogs on the street with other dogs and they will revert back to their wolf-pack mentality. Gotta love pets! Oh and I have 4 cats! I hope I don't die tonight. LOL Dogs bark, don't bathe, and can't be litter box trained! I don't like dogs...LOL

[@commenter4799]

She made those dogs promise to eat her to stay alive if they were trapped with her until someone found them. MADE THEM PROMISE! Don't you feel bad now, lol.

[@tundea7632]

pls i need your help with configuring my rashberry pi 2 to do voice command ....and pls can i have ur mail or sype name need your help big time

[@Bayle_Bune]

Dude, use the tab key for auto-completion in the terminal. cd ~ ls my[Tab]

[@direzionidiversewebradiost9670]

what you have against cats?my father's cat died less than a week after he died...surely would never eat his arm....but even...would have been nature,just good use of resourses--lol....nice lessons...better with less of the booom....greetings from italy...ciao

[@paulmcwhorter]

My channel is tailored towards an audience who enjoys people who yell 'boom', and hate cats. Those things, my friend, are not going to change

[@scotttrek4182]

If i die then my cat is free to munch on my body until someone comes and recues them

[@hotquebec]

Very informative! Get that cough checked out please.

[@ROHITPANSARA007]

Oh now I know difference between dog and cat as pet because I haven't pets till the date............

[@polyesterbebe]

Engagement

[@otzi_2020]

9:32 thank me later.

[@ritheshmanikandan6006]

I hate cats too

[@Inaflap]

So... you don't like cats. Do a web search on "Dog Eats Paralyzed Man’s Testicle As He Sleeps". Sleep well.

[@mailtojarriya]

Thank you so much.