Project - Giant Shoe Box

[@charleyandsarah]

So nice seeing your wife help you out and happy that she likes the boxes. They look great.

[@DesignBuildExecute]

Thanks! It was good to get her out to the shop.

[@JayBates]

Nice stash of plywood! I'm about to pick up a similar stack. Those shoe boxes turned out great! Very cool

[@DesignBuildExecute]

Thanks, Jay! The rest is reserved for some large shop cabinets.

[@barryroberts6470]

WOW Great project and video Jason, and those shoe boxes are really big! There's a lot of plywood left over there, must be cheap in the states as over here its expensive for one sheet. Cheers. Barry from England.

[@DesignBuildExecute]

Barry Roberts Thanks! Actually, I designed the layout in CAD to fit all of the parts on a single 4'x8' birch plywood sheet. I used 3/4" for these. The only part that I couldn't get from the sheet was the drawer bottom. That was 1/2" birch plywood. 3/4" Birch sheets run in the $50-60 range here in the states.

[@DIYTyler]

Those are HUGE Jason! Turned out super awesome....please send over several of the sheets of plywood when you have a minute, looks like you had a few leftover.

[@DesignBuildExecute]

Thanks, Tyler! They're on the way :)

[@plemieux7237]

That's a interesting automatic sander and painter you have...... Nice project.

[@DesignBuildExecute]

+P Lemieux She's reliable and likes painting way more than I do ;)

[@SterlingsWoodcrafts]

I would hate to meet the person wearing the shoes that came out of that box lol, Very Cool Jason !! Looks Great

[@DesignBuildExecute]

***** Thanks, Sterling!

[@jessicamatlock8911]

is it possible to get the plans for this? This is amazing!!!!

[@rickywalden4206]

Great idea Jason. Turned out nice. I must be doing something wrong, as I need to know your secret on how to get the wife to do my sanding and painting!

[@DesignBuildExecute]

Ricky Walden She likes to paint, usually on canvas. For this project, she liked that she didn't have to come up with what to paint, she had a clear picture what needed to be done :)

[@jitu757]

Great video dude and I like how your version used less screws to construct the overall box. Also, for the lid/cover, I was hoping to see you make it with dove tail joint instead of using screws...it would have been more time consuming for sure but something about making joints without screws and nails is very cool. =)

[@DesignBuildExecute]

I was building these for strength, but also as fast as I could because I was on a strict deadline. In the end, Titebond II and brad nails really worked well. They were rock solid. Thanks for watching!

[@StoneandSonsWorkshop]

Nice build, Jason. Those turned out pretty cool.

[@DesignBuildExecute]

Stone and Sons Workshop Thanks! We were pretty happy with them and the client was very happy with them. She ordered another one on the spot.

[@JohnHeisz]

Pretty cool Jason!

[@DesignBuildExecute]

Thanks, John!

[@labruins09]

Do u have plans for the show box available.

[@stevecollins9450]

Very nice design and build, Jason!

[@DesignBuildExecute]

Thanks, Steve!

[@macrapidito1]

hey quick question what kind of circular saw guide did you use to make the long cuts at the beginning of the video? thanks for the response

[@DesignBuildExecute]

+macrapidito I have a DeWalt DWE575. Thanks for watching!

[@macrapidito1]

I was talking about the guide not the saw

[@NickFerry]

well done Jason - cool idea

[@DesignBuildExecute]

Nick Ferry Thanks, Nick!

[@GaryTruesdale]

very cool

[@iveranswer]

very nice project , Jason. I have one question , where I can get the 2By4 shelf u were using at 0:22 ? If u can send the link will be awesome .

[@ITSAWOODTHING]

Those turned out awesome.............. what a cool idea.............. great work............

[@DesignBuildExecute]

ITS A WOOD THING Thanks!

[@aJ-od9vv]

This is fantastic ! How long did it take your to build this?

[@DesignBuildExecute]

Took us about four days from start to finish. We built three at the same time.

[@sarrasin4754]

Hello very good job :) You can make a list of all the tools needed to cut, the glue... Please

[@moyperezwoodshop1722]

The boxes look great! Great video Jason.

[@DesignBuildExecute]

Thanks, Moy!

[@mfwoodshop]

Nice boxes Jason. I wish my wife would do the finishing on my projects

[@DesignBuildExecute]

Mike Fulton Thanks, Mike! She gets all of the painting credit. She actually likes painting, but it's usually on a canvass.

[@albertacosta5158]

How did u paint the Oreo pattern on the Jordan box? What was the easiest way for u to make it look like swirls of Oreo?

[@DesignBuildExecute]

We found loading the brush up and then tapping it against a piece of wood flung the paint onto the box in a decent random pattern to get the effect we were looking for.

[@msnene884]

if only I had all the material and space and the talent to build things. lol I hope you guys are still making these good busmess . if so where can I order mine...

[@TheUStechreviews]

What type hinges were used, tried 3 different types that didn't work.

[@DesignBuildExecute]

Piano hinge on the back side. Lid stays to keep the lid up.

[@renewedtub2169]

Fantastic job I mean a+ what's the measurements of that box? An the draw sizes? And how much u do you charge?

[@DesignBuildExecute]

Thanks! I have uploaded a cut list type drawing of the main box to my website www.rauschwoodworks.com. I'm building these for $300 each, plus freight shipping, depending on your location.

[@renewedtub2169]

Fantastic! I would like to get one and I live in maryland

[@SteveCarmichael]

Those boxes are so cool! Good to see you two working together. Hey, I saw that thing on your door. LOL :o) Great video Jason!

[@DesignBuildExecute]

Steve Carmichael Thanks, Steve! Yeah, how did that guy get in there? :o)

[@Mitermikeswoodshop]

Steve Carmichael Yeah that is one handsome guy....how does someone get such a large picture like that?

[@elicortes9040]

What are the lengths you used to make the jordan box?

[@davidgood2598]

OK thanks and I appreciate your sharing, will attempt this weekend thanks again, I subscribedo nice job

[@DesignBuildExecute]

Thanks for watching, David!

[@hamplitosway4979]

How deep do you make your Dado cuts on the inside walls of the sides?

[@DesignBuildExecute]

I typically go one half of the material thickness. Helps hold everything together while gluing, before I can get brad nails into it.

[@kaylaswisher3455]

What measurements did you use?

[@LaCatHTF]

I wanted to build one. Possible to get some measurements?

[@BradleyMakesThings]

These came out nicely! And at the end - drop the nut down into the table saw? I definitely know that pain, haha.

[@DesignBuildExecute]

Thanks! I was wondering who was going to watch until the very end and comment on that! To make it worse, to get it out I have to unclamp the dust collection hose to get to it.

[@BradleyMakesThings]

Definitely know that pain! Only on my saw, because of how they made the dust shroud around the brad, I've had to take off a while dado stack and snake my hand down in there. No fun! Suuuuuuper careful when I do blade changes now.

[@eddieaponte3836]

Nice!! What was the thickness of the plywood?

[@pecaitoxxx]

just will like to know.... how did you do the logo ... was it just a regular computer print and cut... or something special

[@QueenB-nq3qz]

do u make just the box no paint.... i really want to do this but dnt have table saw do u have any other ways or ideas

[@DesignBuildExecute]

I have in the past for other clients. Contact me for pricing.

[@davidgood2598]

how big is this box. and did you use 1 sheet of plywood if you dont mind sharing thanks

[@DesignBuildExecute]

+David Good One whole 4x8 sheet of 3/4" and about 2x4 of 1/2".

[@propsandcosplay]

I like the shoe box do you have the plans I would love to make one for myself

[@imabroncofan7]

Hey Jason did you print on sticker paper and then cut it out with an exacto?

[@luiscortex1326]

Kinkos,can do em.

[@DesignBuildExecute]

I used contact paper in my ink jet printer. You have to be careful because the ink will never fully dry on the vinyl surface. Just trace/cut with an X-acto carefully and it should turn out. I also tried using a cut out stencil, but even thick card stock curled up and I got some underspray from the paint.

[@dmoss8928]

I'm in the process of building one and wanted to ask what did you use to fill in your screw holes? Love the video!!

[@stuartkerr6831]

Sorry bout late reply dude, but “B4” u paint use polyfilla/putty then wait on the small amount to dry,.. prob few hours then sand down any rough parts until flush with surrounding wood mate! Hope this helps some?? Regards fi Scotland UK

[@Freethrows36]

Is there anyway I could do this without having direct access to the tools like is there any shop classes I could go do this locally this would be dope

[@DesignBuildExecute]

I think with some careful planning and going slow this could be done with a circular saw, jig saw and maybe a router. The rest of the tools are a basic drill and impact driver. Of course, the screws could be installed with a regular screwdriver.

[@007darthvader007]

awesome video but the plans are missing the drawer measurements/cutouts. Did I miss something?

[@DesignBuildExecute]

Thanks for watching. I'll go back and check that out.

[@briezeclark5934]

HI, can you tell what dimensions you used for the box?

[@dannielegarcia737]

Where can i get the vinyl stickers for this box??

[@DesignBuildExecute]

We made the stencils in-house and spray painted the logos on.

[@woodandmetalandstuff]

Nice work , Great design

[@DesignBuildExecute]

Paul Dove Thanks, Paul! There are a ton of pictures of these on the internet, but no one is sharing plans, so I just had to eyeball and draw some up in CAD. Once I refine the numbers and make those changes to the drawing, I plan to make them available on my website.

[@mackyribargoso2387]

sir, what type of paint did you use for the jordan box?

[@DesignBuildExecute]

Just regular home store latex. Nothing special like outdoor.

[@luism2924]

wat r ur measurements

[@davidgood2598]

Ok, sorry to bug, but there is not a bottom, just the drawrer correct ? just want time to make sure I am seeing this correctly thanks

[@DesignBuildExecute]

That is correct.

[@GibsonYoudad]

What stuff do u need to build it

[@yhonie714]

Where can i buy the plans for this build

[@cgio3206]

which wood do you use Is this Plywood ??? Please reply im making one for my Design and Technology project work

[@DesignBuildExecute]

Birch plywood.

[@jroyal2589]

CGio you could also use MDF board but it's going to be heaver and more expensive.

[@VEEVEEISME]

Man I wish that I remembered the basic training I received in wood shop class..

[@DesignBuildExecute]

+Creole Kisses Just get into your shop/garage and start building! You'll be surprised how much comes back to you. Keep watching the videos here and on other channels. They will inspire you to build more and learn more. Good luck!

[@dmoss8928]

What type of plywood did you use?

[@edybertogonzalez5710]

We're did u get your Jordan stencil

[@DesignBuildExecute]

I printed it out from an online image and cut it out on contact paper.

[@lamar22587]

How much would you charge to just make the box and ship it

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@mad_dad2600]

do you have a plan for how to make the shoebox?

[@laneledwards4826]

How do we purchase one? Do you ship them ?

[@DesignBuildExecute]

I do. I build custom. Contact me through my website rauschwoodworks.com

[@camrevill5089]

Great job Jason. Do you sell these? If so how much? Thanks!

[@DesignBuildExecute]

Thanks, Cam! email me at [e-mail] for details.

[@varejera1]

how much do you spend to build , and how much cost one of this my friend? thanks

[@dmoss8928]

Do you offer plans?

[@kdtshy5996]

how much do you charge to make one?

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@pure_paint_life1523]

Do you have all the cut measurements

[@spiffykikz1487]

what are the things in the corner used to hold the door open called +jason rausch

[@DesignBuildExecute]

+spiffykikz I call them "Lid stays", but I doubt that is what they are actually called. They are a form of scissor hinge, with locking detents. I get them from Lowe's and Home Depot near the other hinges. Make sure to buy a RIGHT SIDE and LEFT SIDE. They are different.

[@spiffykikz1487]

+Jason Rausch thank you very much found exactly what i need and its called a lid stay hinge

[@CaptainCater32]

Great Job!

[@che2smoothtv6]

where can I get one of these because I need a Jordan, nike box just like these asap!

[@TawnyWolf11212]

Same here. I brought like 12 pairs of sneakers from Flight club and I need storage...

[@che2smoothtv6]

fr i got more than 100 jordans never worn so ima need a lot of boxes

[@Stepheng198]

what type of paint did you use?

[@DesignBuildExecute]

+Stephen Greene I bought interior quality sample cans of the colors I needed at Lowe's. I think they sell the Behr brand on paints.

[@jimsfunbirdhunting]

how much do you get for one of these?

[@DesignBuildExecute]

I charge $300 each, plus freight shipping if it can't be picked up locally.

[@jimsfunbirdhunting]

nice..i own a large print / marketing firm and wanted to find a project to do some kind of crazy stuff...this was so cool..

[@jimsfunbirdhunting]

Jason you have an email sir?

[@kevinmaxson7304]

1) Hi, Shaena! 2) Picture-in-Picture?? How'd you do that? I need to do that. 3) That photo of Steve Carmichael is just plain creepy. ;-) 4) Nice work, Jason.

[@DesignBuildExecute]

Kevin Maxson If she was sitting here right now, I'm sure she would say hi back! PowerDirector makes it easy to add a second clip to another timeline, size it down and run it "over" another clip. I can show you the next time you're down this way. I printed Steve on my new printer, so it's an awesome 11"x17" Steve! Thanks, buddy!

[@kevinmaxson7304]

Jason Rausch PowerDirector, huh? I use Windows Movie Maker, but it looks like there's a sale going on at CyberLink right now. It might be worth it for the supposed increased speed alone...

[@DesignBuildExecute]

I think they're always running some kind of sale. I just looked at it and I think I paid the same price.

[@deejay2426]

where can you buy this Jordan box

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@JimE6243]

Lookin' good. Must be nice to have a "finishing department". JimE

[@DesignBuildExecute]

Thanks, Jim!

[@johnjacob1521]

Build Design im going to get the materials for this project tomorrow may I ask if wats better 1/2 or 3/4 sheet of mfd

[@tooljunkie555]

Once again, having all the fun..;) j/k Looks awsome jay! And dude thats so ironic u just made this. A friend of mine on facebook msgd me yesterday and asked ifni could make him one..lol NO B.S. so heres my question:how much wood u charge someone (materials not included) to make one 36LX24WX24H? And is 2 full sheets enough u think Im using birch or maple havent decided yet. Thanks for sharing. Now I know how to make it!:)

[@DesignBuildExecute]

Joe Walters Thanks, Joe! With my design, I got all of the major parts from a single sheet of 3/4" birch plywood. The only part that didn't some from this was the 1/2" plywood bottom for the drawer. I'm currently charging $300 each, painted. I already have a few orders waiting by the day I delivered these first two.

[@tooljunkie555]

Jason Rausch nice! &what are ur dimensions. If I can get away wth one sheet vs 2 id rather go that route..yea I was thinking between 150 and 2for mine. .I dont have the pull out drawer and this guys kinda a cheap skate. Lol

[@DesignBuildExecute]

Joe Walters Email me at [e-mail] The price I quoted is factoring in the piano hinges, the lid stays (I didn't show that in the video), drawer slides and the custom paint colors we had mixed.

[@tooljunkie555]

Jason Rausch these things seem to be a hot topic . Ive seen a puma, a chuck Taylor converse, adidas, nike, & of course the ring leader, jordan;), Good deal man. I wad wondering about the trailer of sheet goods. Looks like youlk be making a few buck$ thts awsome ur wife kicks in and supports ur woodworking. Mine just makes a list..lol

[@tooljunkie555]

piano hinges can get up there in price! and custom paint says it all..ill email u when i get home tonight..have a good one bro!

[@Whatgoinonupinhere]

What kind of wood did you use?

[@DesignBuildExecute]

3/4" birch plywood.

[@vizcarraviscarra2441]

How many sheets of plywood Per Box

[@priminagracialopez5926]

What are the measurements and materials?

[@candrasugihantoro]

Good idea 👍 .. from indonesia

[@chloerobb2591]

Can you tell me what the inside dimensions of this box is please

[@nicolasherrera3109]

Have you the plans? Thanks

[@angelhernandez5166]

What is the price for one box

[@jdeigenbrod1751]

How many pieces do I need?

[@zackedwards5294]

would there be any way that you would sell these? or make one for me?

[@影子-r8q]

Will I be able to tell each timber Size it?

[@kaseyjo6273]

Would you ever make/sale one of these?

[@KyleVeatch]

Hey, great video! A friend of mine was just asking me if I could make one of these! Courtney Banks

[@DesignBuildExecute]

Thanks, Kyle! Really not that hard to build. Just a little planning on layout.

[@JimDockrellWatertone]

I see you brought the pros in for finishing......I am not a big fan of doing the sanding either!

[@DesignBuildExecute]

Jim Dockrell She loves painting and volunteered for the job. She even took time to set the camera up while I was at work.

[@jdeigenbrod1751]

What kind of plywood is that?

[@DesignBuildExecute]

3/4" birch plywood.

[@jdeigenbrod1751]

Thanks! Going to make one for myself

[@youssefkabbati7]

where to buy the stickers?

[@curvysunflower]

do you guys make these ? for how much ?

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@ksigaming1333]

Would you sell one of the Jordan shoe boxes

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@kasectomi]

Liked + subscribed!

[@aznmastie629]

Amazed!!

[@DesignBuildExecute]

Thanks!

[@HavokZero]

good stuff Jason!

[@DesignBuildExecute]

***** Thanks, Joey!

[@staceyverley3851]

Do you still sell these?

[@kennyrobert9017]

Very cool brothers . damn,i like it . nice jobs !!!!

[@javierdorante3773]

which is the millimeter MDF?

[@DesignBuildExecute]

I used 3/4" birch plywood for the build. I'm not sure what the conversion is to metric, but a quick Google search will tell you.

[@sarahdean5057]

Please tell me you sell these???

[@DesignBuildExecute]

I do. I build custom. Contact me through my website rauschwoodworks.com

[@everybodycooksclub796]

hello , can u write plz the sizes of every single detail, i wanna try to do to

[@aliciaspencer9335]

do you do this as a business and do you ship

[@DesignBuildExecute]

Please help by liking and sharing my latest video! Thanks!

[@Justificable401]

+Jason Rausch how can i get one of these and how much do you charge ?

[@Justificable401]

?

[@baseog420]

Can you send me measurements on how to make

[@mrsaddiction18]

Do you sell these??

[@DesignBuildExecute]

I build custom. Contact me through my website rauschwoodworks.com

[@drkicks0072]

nice vid ! 👍

[@DesignBuildExecute]

+Dr kicks Thanks for watching!