Assembling a HARBOR FREIGHT 4x8 heavy duty Folding trailer

  Рет қаралды 327,032

Ray MAKES

Ray MAKES

Күн бұрын

Пікірлер: 398
@fuzz1303
@fuzz1303 7 жыл бұрын
Thank you for your video. I was completely dumb-founded about how to secure the wheel to the axle when it came all preassembled. Your note about knocking off the dust cap was the missing piece to the puzzle for me. Again, super helpful!
@RayMAKES
@RayMAKES 7 жыл бұрын
+Nick Evans awesome!! Glad it helped you out! Btw I modified this trailer to fit a 12' boat.... You might find those videos interesting
@milk2percent416
@milk2percent416 7 жыл бұрын
Tons of help
@keithlucas6260
@keithlucas6260 5 жыл бұрын
Real mechanics use channel locks to take them off when the vehicle comes in the shop, but since they're not "attached" to the axle any pipe or rod fitting in the "hole" works. Using a screwdriver tends to punch a slot right thru stuff.
@gagandeepsanghera6707
@gagandeepsanghera6707 4 жыл бұрын
Ray MAKES was wondering how much it was to title and registration
@pahu47
@pahu47 3 жыл бұрын
Well-known that the included 'grease' for bearings is sub-standard and fails prematurely. If youre going to build this trailer, use good grease on the wheel bearings
@klinkster1955
@klinkster1955 Жыл бұрын
Wow, $269 is a steal. Im not sure what year this video was made but in 2023 that trailer is over $500
@SiXiam
@SiXiam 7 ай бұрын
@@Threedog1963 Still cheaper than a Tacoma.
@agentcovert
@agentcovert 7 ай бұрын
😂😂😂..in 2024 the 1720lb 5 lug " super duty" is $550..grabbed one for $412 with a 25% off..the smallest/cheapest 40x48 trailer was $199 back in the day..currently its $399..
@RayMAKES
@RayMAKES 3 ай бұрын
Yeah it was a while ago
@wordzenpix
@wordzenpix 3 жыл бұрын
Excellent, straightforward tutorial, clean presentation, tight editing. Very helpful. Thanks.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@joshcarrier6392
@joshcarrier6392 4 жыл бұрын
I wanted to thank you for sharing this video. I watched this video many times while assembling my trailer, due to the directions being very unclear on what parts were which. The walk thru on the wheel assembly was a life saver. Thank again.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@ebohls
@ebohls 4 жыл бұрын
Here I am, thinking about buying this trailer for my 12' homemade plywood boat, so, yeah, your video is really perfect. Thanks.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@bobvoorhees1436
@bobvoorhees1436 5 жыл бұрын
Good catch on the two longer bolts for the trolley/fender bracket tie points. I put the fenders and the dolly caster frame on per the manual vs. waiting until I had tires on due to the cramped space once tires are on. Also, if you fold the trailer as it shows in the manual while doing this, there is plenty of room to assemble everything. Don't tie the front and rear frame channels together before this point even if you don't want to use it as a fold up. do it after tires are on so you can fold trailer to install tires. You can tie the two channel together after you flip it back over.
@RayMAKES
@RayMAKES 5 жыл бұрын
good points!
@paulpinto9783
@paulpinto9783 3 жыл бұрын
Thanks. Me a a few techs at work built it yesterday for my bass raider. I can’t wait to finish it off with a deck. And btw. I didn’t build it to fold either. But it didn’t realize it tilted. So cool. Thank for the video. Subscribed
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@herbmorris2762
@herbmorris2762 6 жыл бұрын
Excellent video. You saved me quite a bit of time with your helpful hints and overall explanation you don't get in the box. Thank you!
@RayMAKES
@RayMAKES 6 жыл бұрын
Glad it helped out
@yvonneserpa3105
@yvonneserpa3105 4 жыл бұрын
God bless you sir for doing this video, because even though the diagrams helped a lot, some parts left me confused. Your video cleared things up and I now have a working utility trailer.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@BobZed
@BobZed 4 жыл бұрын
I'm in the process of assembling mine. It will NEVER get folded up, so I didn't install the hinges. I'm cutting the end off of the bracket for the casters so it's just a piece of angle iron. I'm going to drill holes and install it where the hinges would have gone. Way more solid than hinges.
@RayMAKES
@RayMAKES 3 жыл бұрын
Great idea
@natejohnson903
@natejohnson903 4 жыл бұрын
Thank you so much for this video it really helped me out in assembling this trailer. I was trying to understand the directions when I came to this video and it worked out great. For me on the wheels I had to jack up the trailer and put it on jack stands to put the fenders on. Thank you for explaining and showing how to assemble
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@dt719
@dt719 5 жыл бұрын
Thanks. This was the best assy video for this trailer on youtube
@RayMAKES
@RayMAKES 5 жыл бұрын
thanks, glad it was helpful
@laven111
@laven111 3 жыл бұрын
I brought the 1720 lb rated . Glad I watched your video . Makes a huge difference . I am by myself so we will see what happens . Thanks again
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@stevenbaker4221
@stevenbaker4221 7 жыл бұрын
I had a trailer similar to this given to me after the original owner had bent the original axle twice. his axle was even a full tube, but still didn't support much weight. My neighbor gave me a 90's Dodge Caravan axle with the leaf springs and shock still attached. That has worked great for 4 years now, even filling the trailer with oak and walnut firewood with foot tall sides on the trailer, and over 30 mile distances.
@RayMAKES
@RayMAKES 7 жыл бұрын
yeah, the axle was one thing i definitely was not happy with as i noted in the video. luckily for my purposes i am only taking the trailer out about 1 mile each way to the river and just using it for my boat, so it is just light duty. not sure i would trust it with the "rated" capacity.
@stevenbaker4221
@stevenbaker4221 7 жыл бұрын
For your application, I'd imagine it will work fine. I just put this on here so others who have bought or are thinking of buying one of these trailers know that this is a good working option. I think mine was originally bought from a Tractor Supply. Not saying they aren't out there, but I've yet to see a store bought small trailer with a decent axle. Which isn't really a problem since the minivan axles are plentiful, cheap, and easy to modify to fit. It's still easier and cheaper to buy a premade trailer and modify it than build one from scratch.
@Thom4123
@Thom4123 7 жыл бұрын
Had similar problems except 1 big issues one of the hubs didn't fit the spindle and in the end I ended up with one extra axle (lol) and 3 extra hub assemblies. But after 8 years I have to say it works for what I need. Take care and keep up the great work.
@RayMAKES
@RayMAKES 7 жыл бұрын
well now you have a few extra parts for a another project!
@kentblairl
@kentblairl 2 жыл бұрын
GREAT video. I kind of like that the axle is open, less chance for water to collect and rust, hidden from sight, which is what kills most boat trailer axles. Thanks for making the video.
@RayMAKES
@RayMAKES Жыл бұрын
thats a good point
@MrSTOUT73
@MrSTOUT73 7 жыл бұрын
I had that same trailer for 25 years and put many miles on it. Was an excellent bargain for the price and I just recently sold it for $160.
@RayMAKES
@RayMAKES 7 жыл бұрын
+Wayne Novotny for the price, I think it's about right.... and I don't intend to overlaod it
@edwardh1003
@edwardh1003 3 жыл бұрын
Did you ever have to replace the bearings?
@rogergoff5874
@rogergoff5874 4 жыл бұрын
I'm getting ready to buy one of these. My modifications will be to beef up that axle. Use some heavy perf. Channel and incase the existing axle in it. But only up to where spring brackets and springs attach. Should beef it up and In close that U channel.
@RayMAKES
@RayMAKES 3 жыл бұрын
Good ideas
@jonbeams9786
@jonbeams9786 6 жыл бұрын
According to reviews i read at hf on their trailers-everyone i read talked about repacking the bearings to avoid axle problems later on.
@RayMAKES
@RayMAKES 6 жыл бұрын
ive had alot of comments on this very thing, i will be addressing it soon, thanks
@timkaldahl
@timkaldahl 4 жыл бұрын
That isn't grease in the bearings. It is rust inhibitor. You need to pack both the inside and outside bearing on each wheel with a good grease. And that red paint turns pink rather quickly.
@RayMAKES
@RayMAKES 3 жыл бұрын
Thanks
@carololivie2095
@carololivie2095 5 жыл бұрын
I got the small trailer and putting it together is very difficult. My box wrench and socket wrench will not fit over the nuts inside the rails because the holes are too close to the sides not letting the wrench fit over the nut. As I turn the socket wrench on the outside the box wrench keeps popping off since it can't lay flat over the bolt. Carriage bolts would have made all the difference and cut the assembly time to 1/4 of the time. Thanks for a great video!
@RayMAKES
@RayMAKES 5 жыл бұрын
i agree, carriage blots would have been the way to go
@marcster13
@marcster13 10 ай бұрын
For anyone considering buying a trailer. I just went through a nightmare and not sure it's finished. It took a total of 3 stores. I went online to look for the closet store that had heavier duty one in stock. The store closet to me had none, so I went to the second closet. They told me they do not have any. They had one sitting up front on display. It turns out the one on display they are counting as inventory. I told them I'd take it and they told me no. They know these trailers are often hard to find so they trick people into coming into that store location for the trailer, only to be told they actually do not have any, even though it's sitting right in front of everyone as a display. Very crooked or at least dishonest. Anyhow, they at least call another store but it's pretty far. They confirmed they had the trailer I wanted in stock. What was interesting is the guy was clear to me that they had both matching boxes. At the time this seemed odd to say but I didn't pay much attention to it. I get to the store and pick up a couple of items and tell them I'm there to pick up the trailer. They bring it out in two boxes. The guy gets nervous because he has to fill out the title stuff. Had a 'how to' binder, I assume the store created so the paperwork gets completed correctly. It was a disaster. He was coming things out and stamping in the wrong place. I was like hey man are you sure you know what you are doing. He asked a couple of people for help. They assured me all is good with the paperwork. I ended up going to the store next to me to have a manager review because it looked off to me still. She made a correction but no stamp in front of the title. I went to get the title and registration a few days later. They basically laughed at me. Told me to get an affidavit and correct the stamp location. I went to the store closest to me again for this. She was very helpful but had to call the store manager in the place I bought it from originally. I went back to get it registered and after a lot of people reviewed the paperwork they decided to do it but advised it could come back later as not valid. So it was a nightmare going through all this. Lots of my time wasted. I hadn't even put it together yet. Now get this. I open the large box with all the parts because I wanted to paint it with a paint that would not fade like the factory paint does. What's odd is i unpack a front cross member. In my head I'm like oh wow, I thought this only came with the light weight version of the trailer. I'm like sweet, they upgraded. I take all the red parts out and paint them. Looks great. Lots of time spent on it. I planned on putting it together this weekend. Even though I've watched at least ten videos on how to put it together I decided to read the manual. I almost crapped myself. The manual is for the smaller trailer!!!! They gave me the wrong trailer!!!!! I paid for the heavy duty version and they gave me the lighter version. Wth!!! It turns out this goes back to the comment about two matching boxes. They gave me the small box of the heavy trailer which has the wheels and springs. The large box is all the framing and axle of the lighter trailer. What a joke! I've put so much time ahead work into this already without even assembling it, even have a wood deck purchased and cut. I can't return it at this point with all the registration fees paid, the frame painted and the store being an hour away. I will put it together and see how it turns out. Not happy about it at all. This also means the next person will get mixed boxes, or maybe it happened before me and I got the mixed boxes. This is just a warning for anyone thinking of getting a trailer. First, call the store to see if they are trying to be crooked by showing a display as available inventory online. Two, when they bring out two boxes make sure they match! If you make it to three, demand a manager completes the paperwork and that the manager goes slow. Any corrections or scribbles will require you to go back and get an affidavit later. If someone from Harbor Freight contacts me and makes this right I will let everyone know. I will be sharing this in many places to get the word out.
@RayMAKES
@RayMAKES 3 ай бұрын
I wold not recommend it today, but it was readily available when I got it
@danthemakerman
@danthemakerman 7 жыл бұрын
You had me at mods. Thumbs up for assembling the trailer in your chanclas.
@RayMAKES
@RayMAKES 7 жыл бұрын
+Dan The Maker Man ha!!! You noticed my fashionable footwear did you!!
@billypowell1332
@billypowell1332 Жыл бұрын
I needed a small trailer to pull behind my UTV at the farm. I bolted together and got squared up then welded together(wasn’t ever going to fold it up).
@RayMAKES
@RayMAKES Жыл бұрын
good plan
@joemartz7512
@joemartz7512 Жыл бұрын
Great Video Ray!!!
@RayMAKES
@RayMAKES Жыл бұрын
Glad you enjoyed it
@precisiontileflooring4436
@precisiontileflooring4436 5 жыл бұрын
I have a general question. The hardware included with the assembly did NOT use nylock nuts. I'm concerned all of the bolted connections would vibrate loose. Did The Harbor include lock washers with the kit? Also, have you noticed on your assembly any nut/bolt combo coming loose? I also notice you didn't fabricate some sort of a jig to keep the trailer frame square? How much time did you spend ensuring a square trailer before assembling the axle? I'm curious to know how this trailer tracks behind a truck once assembled. GREAT VIDEO! It is pretty informative! Thanks!
@RayMAKES
@RayMAKES 3 жыл бұрын
The trailer has been great, no problems. I just used a square when I assembled
@RayfordHumphrey
@RayfordHumphrey 4 жыл бұрын
Just curious how your wheel bearings have held up since you did not clean out the packing grease and repack them as the instructions say to do? The instructions also do not say anything about the inner bearing but it also needs to be removed, cleaned, and repacked. There are a couple of videos on KZbin that show how to do this and preserve the rear grease seal.
@RayMAKES
@RayMAKES 3 жыл бұрын
Perfectly, no problems
@dubmob151
@dubmob151 3 жыл бұрын
So why did the manufacturer pre grease the assembly if it needed to be cleaned off and greased? Just to handle corrosion on the boat ride over?
@RayfordHumphrey
@RayfordHumphrey 3 жыл бұрын
@@dubmob151 the bearings are not fully packed, they only have a small amount of manufacturing grease in them. I also thought it was strange but Harbor Freight assured me that they needed to be repacked per the assembly manual - www.manualslib.com/manual/65073/Haul-Master-Trailer-94564.html?page=11#manual .
@nathanhoover2225
@nathanhoover2225 5 жыл бұрын
How tight should I tighten the leaf spring bolts, eye bolt and shackle bolt I believe they are called? Should I tighten them as hard as I can, or should I tighten them snug then back off a bit? Excellent video! Thank you for this. Also, should I tighten the axle U-Bolts as tight as possible? I did tighten in a diagonal criss-cross pattern.
@RayMAKES
@RayMAKES 3 жыл бұрын
Tight, but loose enough to rotate
@ChristianConservativ
@ChristianConservativ 5 жыл бұрын
Ray, I want your workshop. Man, mine looks like I don't have any tools and work in a shed, compared to yours. Kudos to you.
@RayMAKES
@RayMAKES 5 жыл бұрын
lol, the "work" workshop is definately nice, and even more so since we put up another 5k sqft building. at home my shop is only 170sqft... so that why i build it at "work". glad you liked the video
@videodistro
@videodistro 5 жыл бұрын
When I built my small trailer many years ago, I went ahead and welded it as well.
@RayMAKES
@RayMAKES 5 жыл бұрын
Good idea
@vincentmalice544
@vincentmalice544 2 жыл бұрын
I was interested in how you were going to use as a tilt trailer. ? I was thinking. Of using 2x6 wood decking extend a couple of feet longer. So when you back off of trailer it does not flip the back end back up hitting under carriage of Vehicle would like very much to hear your idea thanks
@RayMAKES
@RayMAKES Жыл бұрын
i eliminated the folding feature when i modified it as a boat trailer
@jacrispy8802
@jacrispy8802 4 жыл бұрын
At the end of the instruction manual there are pictures of all the parts with their designated number next to them
@RayMAKES
@RayMAKES 3 жыл бұрын
Thanks
@dubmob151
@dubmob151 3 жыл бұрын
Maybe black sharpie mark the parts in an inventory check before starting assembly then
@danburch9989
@danburch9989 6 жыл бұрын
Looks like you have a well-equipped shop. Maybe welding flat bar stock to the axle to enclose it will give it the strength you need at a lower cost than a new axle..
@RayMAKES
@RayMAKES 6 жыл бұрын
yeah, i think that's a great idea
@chartle1
@chartle1 7 жыл бұрын
I've been looking at these trailers for some time. They are popular in the homemade teardrop travel trailer community. They also get rid of the folding feature of the bed by taking those two back to back cross members and put them in the side channels so instead of just a 6 inch or so plate its now spliced together with two 4 foot pieces of steel. they then replace the cross piece usually with wood but I think you may have some scrap metal around somewhere that could work. They also usually move the axle back to get the proper 60% of the weight in front and 40% behind the axle. In most teardrops the kitchen in in the back and thats where most of the weight is. Some add a box beam that connects the hitch to the frame by going down the middle of the entire trailer. How much of a hassle is it to register? In many states its a huge hassle and it was to the point that in my state, PA, they stopped selling them because people returned them after getting a round around at the DMV. One person's account had him taking multiple pictures form many angles and taking it to a certified weigh station to get an official weight. He sends it all in and weeks later it gets returned because of something about the pictures not being labeled properly. :( One work around that still may work is you register it by mail with I think Maine. You send the proper form with a check for maybe $30 and they send you a Licence plate, a plate that's like your VIN you pop rivet to the frame and the proper registration card. Its good for a year and then you can go to AAA and now its a transfer and not a new registration. Maybe you can use some of that extra hardware on the . . . . . wait for it .................. Captain America Shield. :)
@RayMAKES
@RayMAKES 7 жыл бұрын
i was wondering how long you were going to take before mentioning the Capt America Shield, lol. can you believe they still haven't been back this way!! in DE the registrations is simple enough with the certificate of origin and receipt. i amy have to build my own tear drop trailer....i really like the idea!
@robertevans6481
@robertevans6481 7 жыл бұрын
thanks for the info on this trailer. have a great weekend...
@RayMAKES
@RayMAKES 7 жыл бұрын
+Robert Evans you're welcome! The modifications​ are next!
@mckrackin5324
@mckrackin5324 3 жыл бұрын
I'm thinking about buying this kit just for the raw materials. I'll weld it together myself. I was just looking at it because buying the raw materials and spindles for a trailer this size is about the same cost. At least this one has everything already cut to length and all I'll need is some touch up paint and apparently, I'll need to finish the tube on the axle.
@RayMAKES
@RayMAKES 3 жыл бұрын
Good plan
@craigmonteforte6111
@craigmonteforte6111 Ай бұрын
There are vAdvantages and Disadvantages to the open Axle frames Boxed Frames can hold water and Mud inside and Rust out faster, either way ?iMO all Trailers Axles have some weakness to them as far as Construction goes a plus to that is the prices of many replacement Axles has dropped significantly over the last 25 or 30 years so purchasing a upgraded one for any project is Affordable and easy to find with upgraded Spindles or whatever you want many of them can be shipped right to your door for a very reasonable cost
@gamesofcontent
@gamesofcontent 4 жыл бұрын
Channel is nearly as strong as a boxed frame and much more resistant to rust. Nearly all of the strength comes from the vertical component of the channel, this is because that is the direction of the force on the trailer. Boxing it would barely improve its strength, but it would increase the chance of corrosion greatly.
@RayMAKES
@RayMAKES 3 жыл бұрын
Great thanks
@soyomofo3162
@soyomofo3162 3 жыл бұрын
You can't use the carriage bolts (w/o mod) because the drilled holes on the trailer frame are round and the carriage bolts have a square neck. It seems there'd be a lot of filing involved? I'd install the 2 castor support bars to the trailer and mount some mud flaps (old rubber door/car floor mats, etc...) to them instead. Dress up the electrical wiring with simple flex tubing (from a junk yard/new) to protect it from weather/rocks/rodents. Mount an old tool box (metal/plastic) to the tongue cross beam for cheap/rusty/non matching tool storage (extra flat tire hardware, bolt tightening, chain stow, chaulk block etc...) or extra tire (may need new holes drilled). Some of the extra holes around the frame can have reflectors bolted to it? Just some many ideas I like sharing.
@RayMAKES
@RayMAKES 3 ай бұрын
All good points
@tylerclearwater6786
@tylerclearwater6786 5 жыл бұрын
Great build! Did you have a torque spec for bolts?
@RayMAKES
@RayMAKES 3 жыл бұрын
Sorry I don't
@americanrambler4972
@americanrambler4972 6 жыл бұрын
Hi Ray. Did you actually repack the wheel bearings before you installed the hubs onto the axle? A common complaint I see about these trailers is wheel bearing and tire wear and failure. I was looking at the 5 lug wheel version of this trailer which is rated for 1,790 lbs payload or something like that. When I contacted harbor freight about the different model numbers, we also talked about wheel bearing issues. The technical representative I spoke with said you must repack the bearings prior to use because the bearing grease the trailer is shipped with is only shipping grease to protect from rust. It is not proper wheel bearing grease. I have noticed a number of the You Tube videos on these trailers show inproper assembly for the wheels and guys making modifications to these trailers which are not towing safe or seriously overloading them. Well beyond what the axle and tires can support. With down the road issues following shortly there after. Ron
@RayMAKES
@RayMAKES 6 жыл бұрын
Im lucky the river is less than a mile from me, so I won't be on the highway much. I will definitely check the bearings when I'm ready to move it again.
@chrisc6874
@chrisc6874 4 жыл бұрын
the numbers are in the back with a diagram. its not hard to figure out. there are 20, 25, and 30mm bolts if I remember correctly . 4 of them are carriage bolts. Best thing to do is organize your parts (like me). Its very easy to build then . The instructions are very clear with great drawings (a 1st for china)! Sort your parts and organize first and you'll be able to see if you are missing anything also. It only takes a few minutes to do that. Then you use the rear of the manual with the diagram as you put it together.
@RayMAKES
@RayMAKES 3 жыл бұрын
Good tips
@LeicesterEnglandUk
@LeicesterEnglandUk 4 жыл бұрын
That was very good Where to buy this flat pak Trailer mate Thanks
@RayMAKES
@RayMAKES 3 жыл бұрын
Harbor freight
@Toycoma
@Toycoma 3 ай бұрын
I've been waiting to get one but I didn't know you have to go get a title for it...... new jersey is a pain. How do I go about that if buying from harbor freight?
@RayMAKES
@RayMAKES 3 ай бұрын
They will give you a certificate of origin, then you take that to the dmv to get a title
@RafaelGuerreroThe4th
@RafaelGuerreroThe4th 3 жыл бұрын
Thanks for the video. Is that 8 feet long trailer includes the A-frame or is that for the bed only. How long is that A-frame? I am thinking of buying this for 10-foot and 5-feet wide inflatable - would this trailer be a good fit?
@RayMAKES
@RayMAKES 3 жыл бұрын
8 foot is the bed
@chartle1
@chartle1 7 жыл бұрын
I think the issue with the grease is not everyone will have the proper tool to properly pack the bearings. At least as much as I know about trailers and grease.
@RayMAKES
@RayMAKES 7 жыл бұрын
you are probably right on that one Cliff! i take a lot for granted in my ship, lol
@MarkLindsayCNC
@MarkLindsayCNC 7 жыл бұрын
According to a friend of a friend who works at Harbor Freight, they used to ship the bearings dry, but got tired of getting returns from people who didn't grease them during assembly. I don't know how true that is, but... yeah... there it is.
@chartle1
@chartle1 7 жыл бұрын
Mark Lindsay even if they did doubt they would use the right grease packing tool. I've heard old timers know how to do it in the palm of their hand.
@RayMAKES
@RayMAKES 7 жыл бұрын
it wouldn't surprise me
@Thom4123
@Thom4123 7 жыл бұрын
Cliff Hartle I guess I'm finally a old timer lol. It's very simple to pack bearings bye hand that was the only way to due it there was no bearing packer tool for years but you know I bought one as soon as I found one. Take care
@lindsaysalyards87
@lindsaysalyards87 2 жыл бұрын
Hi Ray! This video is wonderful! Question - does it seem possible to construct the trailer to be half the length by not attaching the back half? Would there be a safe way to mount the axle to the center of just the front half?
@RayMAKES
@RayMAKES Жыл бұрын
Yes its possible. You just need to fold it up, might need to rearrange some components
@SilverBullet93GT
@SilverBullet93GT 4 жыл бұрын
gloves, cardboard, power tools, all good friends
@RayMAKES
@RayMAKES 3 жыл бұрын
Truth
@SeattleCastro
@SeattleCastro 4 жыл бұрын
awesome video, thanks for making it.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
3 жыл бұрын
Where did you ground your wiring? That's been my biggest problem with this trailer. Otherwise, I absolutely adore mine.
@RayMAKES
@RayMAKES 3 жыл бұрын
You ground it to the frame
@pahu47
@pahu47 3 жыл бұрын
I used a second ground wire in the middle of frame, joining the 2 pieces, so theres no problem down the road. The 2 halves of the frame are only bolted together, and corrosion over the years may cause a grounding/lighting problem.
@walterhynson2898
@walterhynson2898 4 жыл бұрын
Nice Vid ,remove the hinges one bolt at a time and put the bolts thru the center beam holes...also grind that bracket for the caster wheels off.
@RayMAKES
@RayMAKES 3 жыл бұрын
Good idea
@hudsonhawk0016
@hudsonhawk0016 4 жыл бұрын
Nice job!
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@3dprintingandairguns668
@3dprintingandairguns668 5 жыл бұрын
I wanted to see how you attached the castors... The nut is so thin on the top of the castor I can't tighten it.
@mikejd1364
@mikejd1364 4 жыл бұрын
Other than trying to find one to buy that will fit you can grind one down. Worked for me.
@3dprintingandairguns668
@3dprintingandairguns668 4 жыл бұрын
I used the wrench I got with my washing machine to adjust the feet.
@foxmulder7616
@foxmulder7616 2 жыл бұрын
Why would one need fenders? I would like to put larger wheels on one of these, are they absolutely necessary?
@RayMAKES
@RayMAKES Жыл бұрын
my state requires them, alot of states also
@visualkeirockstar
@visualkeirockstar 5 жыл бұрын
I just got new tires on them and they wobble a little bit. Everything is tight and bearings are still good. Any tips on what I should do?
@RayMAKES
@RayMAKES 5 жыл бұрын
no idea, i haven't had that issue
@visualkeirockstar
@visualkeirockstar 5 жыл бұрын
@@RayMAKES I figure it out. My hubs are just warped. I'm pretty sure it came like that from the factory because theres nothing I did that could of warp it.
@RayMAKES
@RayMAKES 5 жыл бұрын
made in china!!! there is always a catch
@jackstraw5527
@jackstraw5527 3 жыл бұрын
Would this trailer be good for loading and unloading a mower/snowblower many times?
@RayMAKES
@RayMAKES 3 жыл бұрын
I think so, provided they are not super heavy
@ReaperWoodworks
@ReaperWoodworks 7 жыл бұрын
Nice job Ray. Can't wait to see your modifications.
@RayMAKES
@RayMAKES 7 жыл бұрын
+ReaperWoodworks thanks Mike! The mods are next!!
@rayligon7230
@rayligon7230 4 жыл бұрын
I am considering getting the 1720 lb. capacity trailer. I checked out the owner's manual and noticed that it says not to exceed 45 mph when pulling the trailer. What are your thoughts on this? What is the highest speed you have pulled the trailer? Great set of videos by the way!
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it , I think the limitations are the tires. I had mine up to 60 mph
@thomasdevitt8964
@thomasdevitt8964 9 ай бұрын
How hard is it to title a store bought trailer and how long to receive title?
@RayMAKES
@RayMAKES 3 ай бұрын
I titled it the following week, no trouble at all
@saskmuddinatv
@saskmuddinatv 3 жыл бұрын
Mine came with a solid square axle. Also no instructions at all. Took a little while to figure that all out.
@RayMAKES
@RayMAKES 3 жыл бұрын
Well, the instructions were not that helpful
@TKevinBlanc
@TKevinBlanc 5 жыл бұрын
If you've got a spring right above each wheel, does the weight of the axle matter much? I mean, it's just keeping the wheels in a line.
@RayMAKES
@RayMAKES 5 жыл бұрын
Cause I like to overdo things
@TKevinBlanc
@TKevinBlanc 5 жыл бұрын
@@RayMAKES Good enough. Seriously, though, it was kind of a question. Do axles break in he middle under normal use? I'd envision it breaking where it meets the hub.
@RayMAKES
@RayMAKES 5 жыл бұрын
Where they like to break is either at the weld (weak weld) or at the axle shoulder. Where ever a small diameter meets a larger diameter, it creates a stress point. This is why you typically see a radius at the transition, to minimize breakage
@gophucyuseff1181
@gophucyuseff1181 5 жыл бұрын
Great video Maybe folding the toung first would make it easier to flip over
@RayMAKES
@RayMAKES 5 жыл бұрын
probably right on that... where where you when i was flipping it over? its been doing pretty good, never folded it up
@brandonbecker1927
@brandonbecker1927 3 жыл бұрын
How do I get the stake pocket for the 4x8 pocket trailer
@RayMAKES
@RayMAKES 3 жыл бұрын
Mine came with it... I sold them
@harleyrdr1
@harleyrdr1 4 жыл бұрын
Crap so many people get rid if the storage rails and casters! I got a hand-me-down trailer and I really need those! ☹️
@RayMAKES
@RayMAKES 3 жыл бұрын
Oops
@jimholmes2555
@jimholmes2555 4 жыл бұрын
No spare tire, I'm guessing it's the standard 4 on 4 bolt circle?
@RayMAKES
@RayMAKES 3 жыл бұрын
Correct
@danleonard8287
@danleonard8287 3 жыл бұрын
Great video Ray! Your video remarks will make it easier for me to assemble without "winging it". Do you remember an estimate of the time it took to assemble totally? Just wondering if I should try on a weekday, or do it over an entire weekend. Thanks so much! Bubs
@RayMAKES
@RayMAKES 3 ай бұрын
I did it in a weekend
@1minibean
@1minibean 7 жыл бұрын
Thanks for the video, can you tell me the height from the level floor to the top rail ? Thanks- JJ
@ctmreynolds
@ctmreynolds 3 жыл бұрын
26”. Hope this got to you in time
@QuanNguyen-og6pq
@QuanNguyen-og6pq 5 жыл бұрын
Hi. Does anyone know the coupler height of this trailer? (distance from the ground to the coupling)
@precisiontileflooring4436
@precisiontileflooring4436 5 жыл бұрын
I ponder that question also.
@humbertovaldez6116
@humbertovaldez6116 5 жыл бұрын
Nice trailer build. One thing. Is this your home garage? Cuz DAMN! A HAAS milling machine in your garage?
@RayMAKES
@RayMAKES 5 жыл бұрын
Lol, no that's at my "work" shop. 30k sqft machine shop
@homegamerengineer3747
@homegamerengineer3747 7 жыл бұрын
Awesome information/review. Thanks for Sharing !
@RayMAKES
@RayMAKES 7 жыл бұрын
+HomeGamer Engineer anytime!
@HAVILA65
@HAVILA65 6 жыл бұрын
HomeGamer Engineer n
@STBRetired1
@STBRetired1 Жыл бұрын
The instructions for my folding trailer call for a 1/4" tapping screw to attach the white ground wire to the diagonal tow bar. What is a 1/4" tapping screw? Is it a 1/4" wide by 1/4" long or what? They are more expressive about using the 4mm self-tapping screws to attach the side lights. But they were included in the light package whereas I have to go buy the not included 1/4" tapping screw.
@RayMAKES
@RayMAKES 3 ай бұрын
I didn't see that on my set of instructions
@sdanville
@sdanville 6 ай бұрын
Why didnt you fold it , if it is a folding trailer like in the photo? and What is your forever trailer if this isnt good enough ?
@RayMAKES
@RayMAKES 3 ай бұрын
I didn't think about it at the time
@napoleonpineda2552
@napoleonpineda2552 6 жыл бұрын
Great instructional video, thanks what state you are at ? Does the trailer needs to be registered at motor vehicles office?
@RayMAKES
@RayMAKES 6 жыл бұрын
yes it does
@dubmob151
@dubmob151 3 жыл бұрын
He mentioned bringing it in for inspection. Do you need to trailer it to the inspection place with some temporary inspection like they give for cars when registering them?
@1999Shortstuff
@1999Shortstuff 6 жыл бұрын
Very nice job with the video and your explanation. Also, nice shop!
@RayMAKES
@RayMAKES 6 жыл бұрын
thanks, glad you enjoyed it
@danhenderson783
@danhenderson783 7 жыл бұрын
A cordless impact driver would cut the assembly time in half
@RayMAKES
@RayMAKES 7 жыл бұрын
i'm sure it would.
@drodriguez3935
@drodriguez3935 5 жыл бұрын
Yessir que the Milwaukee commercials pls
@jedisentinel1499
@jedisentinel1499 5 жыл бұрын
So would having good directions. But yeah, impact wrench would be fabulous.
@sv650rider
@sv650rider 4 жыл бұрын
i did mine with my new ryobi imapct driver. bought a driver adapter for my impact driver and used a box end wrench to hold the other side, only things i did by hand were the nuts on the U bolts on the trailer plates. gravity helped line everything up. well thought out design.
@stinkycheese804
@stinkycheese804 4 жыл бұрын
Faster yes, but in half? Not even close. By the time you get the parts aligned, have a wrench on the back anyway, it's only going to take 10 seconds per fastener if that, so the time the impact driver cut out would be more like 15 minutes.
@wolfy1
@wolfy1 4 жыл бұрын
So are those two boxes what it comes in from the store? I was wondering how people get it home with a smaller car
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad you liked it
@jimmyt568
@jimmyt568 3 жыл бұрын
biggest thing is repack bearings and prefer replace bearings and seals before use unless is just an occasional use with not alot of weight..
@RayMAKES
@RayMAKES 3 ай бұрын
Facts
@doryliggett8407
@doryliggett8407 7 жыл бұрын
Would you come to Memphis and put mine together? Do you think it's a good idea to exchange the 1 7/8" ball for a 2"?Also I've read that you need to change the grease for marine grade. My use would be hauling two 50lb kayaks.
@RayMAKES
@RayMAKES 7 жыл бұрын
Hi Dory, i would love to come to Memphis, lol! you can exchange the coupler if you like but it wont make the trailer any more Heavy duty. the reality is that this trailer is light duty, even though it will haul almost 1500 lbs that is an evenly distributed load, not a point load. if you want to change the coupler you may need to make some spacer plates. i show how i modified this trailer in my other videos. this one shows how i lengthened the tongue and put spacers under the coupler kzbin.info/www/bejne/kH3dnZh6f91-kNU
@usaproud3168
@usaproud3168 3 жыл бұрын
Ray, how do you go about getting this trailer titled? Thanks
@RayMAKES
@RayMAKES 3 жыл бұрын
It was easy in my state. You need a bill of sale (receipt) and the certificate of origin (comes with the trailer). Had to get it inspected, then took it in to the DMV.
@dubmob151
@dubmob151 3 жыл бұрын
Who does the inspections? Is it the same as an auto inspection process, minus the emissions testing?
@willisrogers559
@willisrogers559 7 жыл бұрын
I bought this and put it together, the only question I have is where does Bolt C, M10x50 go? It is listed on the parts list, qty 1, but for the life of me I can't find where to install it on the trailer?
@RayMAKES
@RayMAKES 7 жыл бұрын
i just looked at my instructions and that bolt is not listed... what is your model number
@willisrogers559
@willisrogers559 7 жыл бұрын
Item# 62648. I'm not to worried about it, just drives me nuts that it is listed on the parts list, it is provided, but there are no instructions on where it goes. haha
@Stucknarutt
@Stucknarutt 6 жыл бұрын
Thanks man. Informative and well done. I want to buy one and was planning on getting the heaviest one, "super duty", 1720 lb capacity for $349.99 but I don't see any difference in them. Would you know ? The axle and hitch/coupler maybe ??
@Stucknarutt
@Stucknarutt 6 жыл бұрын
Also, very nice shop you're in there with very nice equipment. You could have made one there I'm sure but probably not for the same $ money and I'm guessing that's why you bought this instead.
@RayMAKES
@RayMAKES 6 жыл бұрын
I'm not sure if there is much difference between the two trailers, except that maybe this one is a folding type
@RayMAKES
@RayMAKES 6 жыл бұрын
Yes you're right, I could gave definately built one, but yes it would have cost more.
@luiscortes7510
@luiscortes7510 6 жыл бұрын
Quisiera saber si se puede encargar, el costo puesto en Medellín Colombia
@RayMAKES
@RayMAKES 6 жыл бұрын
Harbor freight no longer sells this trailer
@alexandernavia5774
@alexandernavia5774 3 жыл бұрын
How big is the Cupler
@RayMAKES
@RayMAKES 3 жыл бұрын
It's a 1-7/8" coupler
@alexandernavia5774
@alexandernavia5774 3 жыл бұрын
@@RayMAKES so what size ball should I get
@RayMAKES
@RayMAKES 3 жыл бұрын
Same size
@jlopezjonathan
@jlopezjonathan 5 жыл бұрын
Does this trailer need to be registered? Does it come with a title?
@RayMAKES
@RayMAKES 5 жыл бұрын
Yes, it comes with a certificate of origin and then you apply for a title locally... if you want it legal
@marcelologan
@marcelologan 7 жыл бұрын
muy bueno y explicativo video, por favor me informaria que clase de medidas tiene las vigas, me refiero a las pulgadas de la misma o sea el grosor, ya que intentaria reproducirla aca en mi pais, ya que no existe este trailer aca y no lo envian tampoco desde su pais. yo soy de argentina. desde muchas gracias
@CombatDoc54
@CombatDoc54 3 жыл бұрын
I saw a video on here where a guy replaced the axle with a solid axle because he was building a camper on it and going for the long highway miles and speed.
@RayMAKES
@RayMAKES 3 жыл бұрын
Good idea
@ericsgreyhairwisdom5799
@ericsgreyhairwisdom5799 6 жыл бұрын
I am 68 and just did it. But not end over end. I picked it up and set it on it's side
@RayMAKES
@RayMAKES 6 жыл бұрын
Great, glad you got it together
@ericsgreyhairwisdom5799
@ericsgreyhairwisdom5799 6 жыл бұрын
@@RayMAKES I bought mine on craigslist for $100 and has all the conversion parts on it.
@thetruthrover
@thetruthrover 7 жыл бұрын
Why can i not find trailers on harbor freight's website?
@RayMAKES
@RayMAKES 7 жыл бұрын
+thetruthrover good question, no idea.
@danburch9989
@danburch9989 6 жыл бұрын
There was a major recall due to the trailer lights not meeting safety requirements relating to side marker lights on the lights and light kits. They may have fixed the issue by now - the trailers show in their online catalog.
@jamescheung6022
@jamescheung6022 7 жыл бұрын
Nice video good job too. Can you do a video with your boat on thereand maybe how you launch it?? Thx
@RayMAKES
@RayMAKES 7 жыл бұрын
thanks! i am currently making the modifications to the trailer, im hoping to have the video loaded for thursday...hopefully it will also have the boat launch too!
@dwightstewart7181
@dwightstewart7181 6 жыл бұрын
The numbers in the instructions refer to the drawings. Those drawings are your key to assembly. You can see which piece is which by looking at the holes. During assembly, make sure ALL the holes (up, down, front, back, etc) in each piece align with the holes shown in those drawings. At that point, just bolt it together.
@RayMAKES
@RayMAKES 6 жыл бұрын
thanks! do you know if they have reissued this trailer. shortly after i made the video it was discontinued.
@dwightstewart7181
@dwightstewart7181 6 жыл бұрын
Yep, just picked up one last week, which I'm converting into a boat trailer for my 12.5' inflatable. They've made a number of small, almost indiscernible, changes (a bolt here, an absent bolt there, etc) from my other trailer. Both are the 1720lbs versions, so can't say if or what may or may not have changed on the trailer in your video.
@RayMAKES
@RayMAKES 6 жыл бұрын
i know for sure that they had a recall on all their trailers due to the tires... so they stopped selling them for a while
@dwightstewart7181
@dwightstewart7181 6 жыл бұрын
Ray .. Yeah, they did. Don't know why. My first trailer wasn't in that recall and I replaced the tires (wear & tear) some time ago. Anyway, they're getting back onto the store shelves now (store said my new trailer is one of the first they received), so they are available again.
@w67rfhv114bjhjhbjhjvjhvyuvhjhk
@w67rfhv114bjhjhbjhjvjhvyuvhjhk 4 жыл бұрын
how big is the box?
@RayMAKES
@RayMAKES 3 жыл бұрын
I don't recall
@danburch9989
@danburch9989 7 жыл бұрын
I need a folding trailer, but it has to have a payload capacity of 2500 lbs or more. I don't think anyone makes one to that spec. Might have to look at building one with 2x3 box frame. At least the trailer gave me an ideal.
@RayMAKES
@RayMAKES 7 жыл бұрын
+Dan Burch great, glad the video was of some use
@sergiojardon6725
@sergiojardon6725 5 жыл бұрын
great info man thanks!!!
@RayMAKES
@RayMAKES 5 жыл бұрын
no prob, glad you liked it
@jharuni
@jharuni 3 жыл бұрын
A 4-sided box axle retains water even with drain holes drilled. If the 3-sided one does the job it will probably last longer.
@RayMAKES
@RayMAKES 3 жыл бұрын
Probably...
@stephenhunter6507
@stephenhunter6507 6 жыл бұрын
Avoid scuffs, get the free tarp coupon!
@RayMAKES
@RayMAKES 5 жыл бұрын
yes, and yes!
@videodistro
@videodistro 5 жыл бұрын
Why ship hub separately and ungreased???? They saved you time and cost. It's not messy if you do it right. Pop off the dust cover from the outside and slip the wheels on. Wow.
@RayMAKES
@RayMAKES 5 жыл бұрын
That's what I did
@dubmob151
@dubmob151 3 жыл бұрын
Is there any preload adjustment for the bearings when installing the wheels?
@jedisentinel1499
@jedisentinel1499 5 жыл бұрын
How's it working for you? If you are using it for your boat did you replace the bearing grease with marine grade?
@RayMAKES
@RayMAKES 3 ай бұрын
Working great
@jnichols3
@jnichols3 4 жыл бұрын
I finished mine yesterday. Today I tried to register it. OMG, this may be imposible. These trailers are not sold in Louisiana, but theoretically can be bought in Texas and registered in Louisiana. I went to my favorite DMV office in Vivian, La. where after waiting 20 minutes outside, because of the Chyna virus they only allowed 4 nonemployees in the building at a time. After being allowed in the building, I waited another 20 minutes to be told that they would not recognize the receipt as a "Bill of Sale", despite it having the price paid and the VIN number (in addition I have the actual title in hand). They gave me a form that would require me to take a Longview, Tx. HF cashier to a notary, or vise-versa. Also, they were behind a plexiglass shield and wearing a mask. It was like talking to Kenny on Southpark. Thinking they were wrong, I then drove to a title company that does registrations in Bossier City, La.. Another 20 minute wait outside. They basically told me the same thing. After half a tank of gas and standing around waiting outside, I was a little frustrated. I called the Longview HF where I purchased the trailer. The young lady told me that since the trailer is a kit and did not come assembled, it does not require the paperwork they are asking for. She told me that this problem is nothing new and that there is a form that explains that the paperwork is not required and should be avalible at any HF (even in La.)or the staff should be able to get me a copy of it to take with me to the DMV. I drove from the title company to the nearest HF (just a couple of miles). Told the lady at the cashier counter what I needed. She had not idea what I was talking about. She called someone over who she believed would know about what I was requesting. He had no idea what I was talking about. He did try to help though. After going to his office he searched on his computer for this mystical form, and could not find it. His best advice was to keep going to the DMV until I was assigned someone who would register it. I will have to probably have to get a Texas HF to mail me the form, or have to drive to Longview and and pick one up in person with no guarantee that it will fix the problem. For this reason I cannot recomment a HF trailer. This is sad because it has nothing to do with the trailer itself.
@oscargreyhound5401
@oscargreyhound5401 4 жыл бұрын
You might want to look for a form used for "new" types of vehicles, that is, vehicles that are built. Other types of this kind of vehicle are DIY campers for example. The form starts the process of determining which class this trailer is, it's dimenstions, color, tire ratings, speed, electrical system, etc. Then it has to be taken to a state inspection agency to approve it. Then back to the DMV for a new vehicle title and registration. This is probably why the people at the DMV are confused. It's not just one form, it's a whole process in most states.
@jnichols3
@jnichols3 4 жыл бұрын
@@oscargreyhound5401, I found the law regarding it, printed it out and took with me. Had no problem after that. I thought that I had posted links to that law on this thread. Seems to have gone missing.
@RayMAKES
@RayMAKES 3 жыл бұрын
Glad it worked out
@artisticbrit
@artisticbrit 7 жыл бұрын
I MIGHT buy one of these Ray, to take my boat across the USA and back... Not sure yet.
@RayMAKES
@RayMAKES 7 жыл бұрын
this wold be much better for that many miles than the "boat trailer" they offer. next video will be modifications to hold the boat! might help give you an idea
@artisticbrit
@artisticbrit 7 жыл бұрын
Ray Pena I can't see if I responded here on my phone, but I will certainly check out your future videos on that trailer modification. I may simply end up renting from U-Haul just for the trip.
@RayMAKES
@RayMAKES 7 жыл бұрын
+Andrew Jones that's also a good option!
@artisticbrit
@artisticbrit 7 жыл бұрын
Ray Pena I am thinking of a camping/boat carrying trailer, it would have the boat on the lower portion off to one side. And the sleeping quarters would be above the boat in a separate box off area. Obviously this would have entertainment/heating/windows/power and Wi-Fi etc. I don't think I'm going to have enough time before I do the US tour to complete this. But will be coming up to see you before the tour.
@RayMAKES
@RayMAKES 7 жыл бұрын
+Andrew Jones great idea!!! Look forward to seeing you! Now that I have the trailer I can get my boat back home Where I have my wood tools...Woodwork is difficult in the metal shop!!!
@KayakMike
@KayakMike 3 жыл бұрын
This is great - but the only part I am struggling with from the directions and I can't find on youtube is the tire installation front to back - everyone fast forwards through it but someone without prior tire experience is completely lost on what you are doing. Is anyone who has watched this or the owner of this content able to shoot me a link on a how-to for the tire portion?
@RayMAKES
@RayMAKES 3 жыл бұрын
Did you figure it out?
Harbor Freight Trailer Build. Full Assembly from Box to Road
20:51
Installing Plywood Deck on Harbor Freight Utility Trailer
8:26
Mother Daughter Projects DIY
Рет қаралды 135 М.
Harbor Freight Trailer vs Custom built Trailers. Is it really this easy?
17:41
Is Your Car Ramp a Death Trap? Let's Find Out!
16:55
Project Farm
Рет қаралды 1,8 МЛН
How to Assemble Harbor Freight 4x8 ft FOLDING Trailer
12:47
Mother Daughter Projects DIY
Рет қаралды 140 М.
Harbor Freight Folding Trailer
6:09
Mr Fred’s DIY Garage School
Рет қаралды 163 М.
Harbor Freight folding trailer ready to use in 4 minutes
3:50
Mike Butterstick
Рет қаралды 182 М.
10,000 Miles Later: The Hidden Dangers of Harbor Freight Folding Trailers
13:22
Unfiltered 100% Waste Oil Vs Stock Diesel Heater
19:38
SteinFab Garage
Рет қаралды 495 М.
How to Turn a Van into a Comfortable Home for $365 | No-Build Van Life
18:23