wandering talk about the new TB40 from Align. I'm just a beginner with a passion for RC Helis
Пікірлер: 33
@sganzerlag7 ай бұрын
Thanks for posting this build review!! What a nice little heli! Rmk: the tail fin is the part of the tail that touches the ground when the heli is stored without battery and with the main blades folded back. It keeps the tail rotor blades from contacting the ground. I do believe that part is carbon fiber.
@raymhuang7 ай бұрын
You may be right, thanks
@johncgibson47207 ай бұрын
Thumbs up. More people should care about small helicopters for their natural high endurance of flight time. I modified my 230s to become a FPV helicopter at 249 grams and HD onboard video recording that flips and snaps with 35 minutes of flight time per charge. No quads under 250 grams can ever beat that, not even professionally designed DJI. They either have to change a battery and going over 250 grams, or they have to turn off HD video and turn off FPV and navigation and make the drone fly in a circle at constant speed to get that advertised 35 minutes per charge, and even then, they can't snap or flip.
@Fran117847 ай бұрын
Very nice, can’t decide if I want one of these or not. Looks like a very nice kit.
@rchelicopter7 ай бұрын
Nice job Ray!
@Backyard_Buzzard7 ай бұрын
holy shit i want one of those too!!!
@JG-dx1ud3 ай бұрын
Any advice on TB40 tail rotor setup? It seems there is uneven travel / More travel rudder left than right. How did you setup your rotor? Do you notice any issues in flight?
@raymhuang3 ай бұрын
I have plenty of adjustment for my two different tail servos (KST Ds565 and Theta THM982) in the tail rod. I set up with tail blades a few degrees to the right to counter torque and up up pretty close on left and right travel in the radio, but not exact numbers (not required).
@alwaysflying65406 ай бұрын
I used to wrap my wires but it made them too bulky and they wont take corners well.
@sawyerheslep84937 ай бұрын
Thank u! I have the tb70 and I'm looking At the tb40. Aligns manuals are definitely not the best. How's performance and power?
@raymhuang7 ай бұрын
I'm a beginner, but it feels like it's got loads of torque. Physically the motor is huge.
@michaeltrager43814 ай бұрын
Hi Ray, I am building this heli now and was wondering if the ESC comes in GOV Mode? It will have a Futaba radio and Spirit 2 FBL controller. Just built a OMP M4 and M4 Max last year and this heli is a bit more complicated to put together. My two OMPs fly great with their direct drive motors on the main shaft. Very simple to maintain. All three helicopters use the same batteries.
@raymhuang4 ай бұрын
I am not sure what default is TBH. The program box is fairly cheap, I would get that if you dont have it already. If not you have to set it with beeps! NO thanks,
@user-mr3je5fj6y6 ай бұрын
Your tail fin is carbon fiber. Are you referring to your tail blades?
@sawyerheslep84937 ай бұрын
Would u buy it again?
@raymhuang4 ай бұрын
I now have two
@RotoRCol4 ай бұрын
for what purpose do you use the super lube grease? is it synthetic grease?
@raymhuang4 ай бұрын
It's a silicone grease that I use on body grommets, O-rings, head and tail shafts and dampers.
@RotoRCol4 ай бұрын
@@raymhuang do you use it in thrust bearings? Or what type of grease do you use in thrust bearings?
@raymhuang4 ай бұрын
@@RotoRCol no, I use a thick grease called Botolube that is easy to apply with an injection type dispenser right into thrust washer.
@RotoRCol4 ай бұрын
thanks@@raymhuang
@elitecol694 ай бұрын
@5:35 you farted. Nice.
@Dysl3xicDog7 ай бұрын
Where are you getting those servos for $20? I have my kit preordered and need to get some servos.
@raymhuang7 ай бұрын
Seller on ebay. Just search for MKS ds95, should come up. I have no affiliation.
@alwaysflying65406 ай бұрын
@@raymhuangI would be interested as well
@modelaircraft65767 ай бұрын
What is the battery size
@raymhuang4 ай бұрын
1800 HRB for me, but I think a little heavier better to balance.
@raymhuang7 ай бұрын
More like 7 hours to build and yes, is buy another though I love my Gaui X3s.
@elxero21897 ай бұрын
No separate bec?
@raymhuang7 ай бұрын
Built into HW ESC, but I could. Do you think I need one?
@alwaysflying65406 ай бұрын
@@raymhuangno their bec is kick ass
@johnblythe64535 күн бұрын
Hello I bought this it tipped over on take off very disappointed destroyed gearbox I have goosky Heli,s they not do this, not buy Align again I am not new to Heli,s lots of work for nothing !!!!