RBC PREP FOR K24 SWAP

Prepping rbc manifold with stock accord tb

[@pacific7775]

Huge tip on the 03 accord throttlebody ...dirt cheap and no adapter needed ...that is a budget saver 👏

[@oemworx4147]

One of the gems I was able to put out there for you guys.

[@gufiaito69able]

@@oemworx4147 I have a stock 04tsx and I'm looking to get some bolt on parts would this rbc and throttle body work?

[@oscarsalas1065]

Can u use an 05 accord tb??? One came up at my local junk yard

[@Freeflowslow]

Oscar Salas yes 03-05

[@seffysaez8038]

Such a great build brother keep it up.

[@irundstreets7126]

Good shit man. Appreciate the tips and information. Putting a k24 together right now for a 99 civic ek. Going to buy my motor this Saturday fresh with 40-50k miles on it.

[@oemworx4147]

Very nice. Good luck on the build.

[@UCHIHA1TACHI11]

excellent tip on the tb that was cool man

[@peterath7347]

I love this build

[@oemworx4147]

Thank you very much appreciated.

[@londalewilliams]

Heard keep gunning and just liked.

[@TheMichaellopez]

Great video.

[@oemworx4147]

Thanks. Much appreciated

[@hahnmowermotorsports179]

As far as the fuel fitting for the rail another option is a quick disconnect to 6AN fitting. Doesn’t require any cutting and costs about the same as a compression to AN fitting.

[@K24_FG2_Coupe]

Stock injectors on Si are also 310cc FYI

[@nopaint1]

I know this is a late post but great video… what throttle cable do you use?

[@bryannunez8541]

love the video one thing is make it longer

[@oemworx4147]

Thanks. Will do I try to keep them short so I won’t make anyone bored watching

[@kenshousewash7312]

I'd love to see the cable bracket. The RBC and Accord throttle body do not have bolt holes to mount the cable bracket. Hmmmm....

[@dakinepr2782]

Amazing video, you got me sub👌🏻 i got a question, the tb must be from a 5 speed m/t accord 03+ 2.4 right ? The a/t tb from them can't be used ?

[@oemworx4147]

Thank you much appreciated. No has to be 2003 accord dx 5spd only model that comes with that tb

[@CryptoMarcos]

Love the build , quick question can I use the stock k24A intake manifold and use the 03 accord tb ? like you suggest in some videos and what gasket and/or deletes are necessary for this to work ???

[@oemworx4147]

Yes you can use a stock accord tb gasket

[@RandomDude320]

what mod did you do to make the accord throttle body fit? , mine hits the manifold on the spring and what bracket did you use ?

[@lifeschoice6235]

what size adapter is for that tps and what size bro. Also will that accord tb work with the rsx and rsx throttle cables?

[@G23teknik]

🔫🌎❤️

[@george.k24]

Hey bro I got a 05 accord n been wanting to swap my manifold to the rbc do u think it would work fine without a check engine light or any problems

[@themadoct]

Yeeeeeer salute 🔫🔫🔫

[@TheLilBroBen]

I have a k24a4 right now with intake, headers, and exhaust system. Honda accord 2003. is it worth getting a new intake manifold on my engine? rbc’s are going for around 300 now. and if I do go for it, will I need to get a tune for it? thank u

[@franciscoesparza410]

I have 2003 Honda accord Ex 2.4 I Vtec

[@FloresRacing]

Does the TB have to be from a 5 speed or can it be A/T?

[@droboyjr]

Would this be the same process for JDM k24A 3 lobe vtec. I think it’s basically the same engine but maybe off of a jdm odyssey?

[@irundstreets7126]

Following...

[@kuasakudamedia8035]

Very detailed explanation. Good job. Subscribe

[@quanwilts357]

I thought the injectors we the same size on both manifolds? Do I need to swap anything if I have the complete rbc?

[@Otjmore]

Is there a big difference ep3 intake manifold and rsx rbc? Shiild I use rbc instead? Could I get away with knock off rbc or stick with ep3 oem

[@76dro]

which imported did you buy the engine from?

[@Raptors_MotorSports]

That trottle body should work with the stock tsx intake manifold as well correct ??

[@oemworx4147]

Yes

[@raysb240sx]

what size adaptor this you use for the temp sensor?

[@pacific7775]

So for your fuel rail did you cut off the flared bit or leave it ?

[@oemworx4147]

I cut just to have the line sit a shorter to look cleaner. You don’t have to cut it

[@franciscoesparza410]

Did you need a tune after or it’s plug and play

[@druginducedfeverdream1613]

I had an 04 accord EX, K24A4 I'm pretty sure. Would that have a different throttle body than an 03 DX? also is the throttle body from the 03 mechanical?

[@Freeflowslow]

The only reason you would need a different throttle body is for k24a2 because it’s dbw not cable

[@bluewanderer9903]

This is interesting. 2 questions if you dont mind: -what is the size of this tb? Any other benefits beside not needing an adapter? - what swap harness are you using? Cheers

[@oemworx4147]

Benefit is using a factory part that’s affordable to get you car running nothing Like oem parts. Ep3 engine harness.

[@PolishedMobileDetailing503]

Aftermarket throttle bodies are larger allowing more air but they are often problematic with idle and sticking, response etc. oem Honda throttle bodies drive nice lol

[@bluewanderer9903]

Right, good to know, I do prefer oem parts anyway, will keep this tb in mind. If I could only find brand new set of ek9 showa shocks now ☺... they dont make them anymore, no choice but aftermarket. Thanks to both of you.

[@gufiaito69able]

@@PolishedMobileDetailing503 so is this throttle body bigger than the stock tsx one?

[@dakinepr2782]

Can i use rsx 02-04 throttle cable with this tb ? Or do i need to use a specific one?

[@oemworx4147]

You will need custom bracket which I will have available soon

[@lucidvtec]

What about the port that gets blocked off?

[@pototatoehead3]

Question I have a k24a8 which uses a electric throttle body. What harness adapts for a manuel throttle?

[@oemworx4147]

You won’t need adaptor if you use the accord tb

[@nicolejohnlachica9778]

what manifold gasket did u use that goes to the k24 head?did u use the gasket from an rbc or the rbb?

[@oemworx4147]

K20z3 thermal gasket from golden eagle.

[@nicolejohnlachica9778]

so it just has to be from k20z3?to block the other coolant outlet from the k24 head?

[@123212vtec]

Can accord CL9 6 speed gearbox be used in the swap?

[@gerardodelgadillo6965]

Per vtec academy you need to use the gearbox that matches its transmission

[@ALLCOMPTON]

This engine belongs to a jdm honda accord k24a not at acura tsx k24a2... I know there essentially the same but I get confused when I hear tsx type s. Just my OCD. Nice video.

[@oemworx4147]

Not everyone knows that in Japan there is no tsx it’s actually a accord. If I say accord k24 everyone will automatically assume k24a4 which we all know it’s no goood. You might be confused but the goal here is not to confuse people on how to do their own kswap.

[@BruceLee-xp5fc]

Never knew tsx came with a type s. Do you know the differences between the rbb1, rbb2, rbb3 and rbb4 ?

[@oemworx4147]

Yes the rbb1 and rbb2 are Ike accord k24 the rbb3 is the true vtec 200hp k24 the rbb4 same as rbb3 except for the one port exhaust head

[@BruceLee-xp5fc]

Oem Worx awesome , I made the right choice with my rbb3 k24. Thanks 🙏🏾

[@wisinyvianel]

Thats a JDM k24a, that one he says it comes from accord type s similar of the TSX 04-05 so thats why he says Tsx type s. Thats what i think.

[@solidstreetrunz3956]

Hey man I’m in the process of choosing a header for my k24 swap and I seen that you went with a megaphone header .. what are the benefits of that header and also do you think it’ll be really loud with a megaphone?

[@oemworx4147]

Megaphone allows powerband to flow smoother creating more exhaust flow before it exits the exhaust its will actually sound quieter with megaphone

[@solidstreetrunz3956]

Oem Worx so basically better gains AND quieter than other k swap headers ?

[@oemworx4147]

There are other designs that might be better than the header I have the one I’m using is budget that will give you the most for the cost.

[@jojofromthaburg6247]

Does it matter if the accord is manual or automatic? 😅

[@carmelomaldonado3799]

What Throttle cable bracket did you use

[@jafaribenjamin9829]

I wanna know too

[@Slaughterk360]

Can I do this rbc swap on 2009 element ?

[@Munchiie]

This is the JDM K24a,right?

[@gcarias57]

Where you get the temp sensor adapter?

[@oemworx4147]

Ebay about $10

[@Rattle_canned_restorations]

F23 throttle body?

[@Macfrugal_]

No such thing as tsx type s but great content so far

[@oemworx4147]

There is a tsx type s in Japan it’s called a accord

[@gufiaito69able]

Yes there is!

[@davnes83]

What swap harness

[@PolishedMobileDetailing503]

Is the return line from the regulator only ?

[@oemworx4147]

Yes what you see is the fuel rail feed the return comes from the regulator

[@PolishedMobileDetailing503]

Oem Worx nice I didn’t know you could mod the oem rail like that. Good looks on the diy vids

[@oemworx4147]

No problem. I just want to share the little I know about going k and keeping it budget for those that can’t spend top dollar I know I can’t lol

[@autintbone1647]

can we use stock intake manifold ?

[@oemworx4147]

Yes you can.

[@SlinkyTHAshooter]

How do I get around the whole drive by wire system?? Can I just cut the plug off the tsx harness and can I keep my stock k24 manifold and use an accord cables throttle body

[@zacharymccauley5345]

What size was that compression fitting on the rail? Or a link. Thanks 🔫🔫

[@oemworx4147]

5/16

[@TheShangralaaaa17]

That thermal gasket doesnt do jack lolol

[@oemworx4147]

You should do some research buddy

[@TheShangralaaaa17]

@@oemworx4147 they literally do nothing but cause air leaks. The manifold and TB get just as hot with them then without them. I run OEM gaskets on my K24

[@user-pwfus]

Keep gunning build lmao dude find your own intro words not someone else's lol

[@oemworx4147]

Are you mad?

[@user-pwfus]

@@oemworx4147 ya furious too fast too furious lmao

[@jaymesp95]

No such thing as a tsx type s

[@oemworx4147]

07-08 Accord/Odyssey in Japan equivalent to the American tsx type s