RC Bench Test Of New motors and Controller

Messing around with some wheelchair motors and a Sabertooth 2x32 motor controller for an upcoming project.
Transmitter/Receiver= FlySky FS-T6
Motor Controller= sabertooth 2x32
www.dimensione...
(bottom of page for links for the pdf documentation)

[@dgb5820]

Great video especially your dip switch setting off, on, off, on, off, on

[@richardhoover5776]

What tires do you use for these jazzy motors? I've been looking for these wheels for this motor and I can't find the right size

[@williamgunter5199]

It would be good to see a closeup look as to how the receiver is connected to the Sabertooth. Is a battery pack required? Also conventional 3 pin servo cables?

[@thangyoung1166]

Well done. Can you make just one motor the right or left turn. Please let show. Thanks so much.

[@dippinator1705]

You show us forward/backward and left/right, Whats about forward or backward + steer?

[@justinking7331]

Can you run 4 of those motors from one motor driver

[@pol_khol____6405]

How turning systems works in remote, both motors runs opposite way.

[@jetenginethrust863]

Are these worm type gears inside the gearboxes? Without the brakes if these were installed on a powerchair/wheelchair would it coast a little when electric power is removed abruptly from full power with someone lightweight sitting on it? I'm trying to find out if I can use them on a model locomotive I'm building. I need them to coast when power is removed without the solenoid type electric brakes installed. Like a RC car with a pinion and spur gear on it. Thanks...

[@sebastianspielerei6403]

Hello can you help me? I have the same controller BUT When I turn it on, the motors run always one sometimes alternately without contact with the recipient This also happens with a connection to the receiver

[@itsdanny83]

Did you ever figure out what was causing it? Mine will do that at times

[@anythingcanhappen4939]

Hi could you explain why you removed the brakes?

[@saravananjothi3723]

Could you please share the motor brand name or the specifications used here? It would be really helpful

[@CunningLinguist01]

I would like to know also

[@TroutGravyWithPancakes]

cclmotors.com/public/assets/common/images/product/product/product-46/spec.pdf?1620198099

[@theantichrist6524]

Really good video information thanks for the info 👍

[@thaisgiacullo3309]

great explanation

[@freemurray]

do you think that sabertooth 2x32 motor driver would drive 4 total motors? or would I need 2 motor drivers? I am making a slope mower and it needs to pull a hill with ease. thanks

[@MsIndianarmy]

its great work i need to know how the break system works can you guide me how to release and apply break

[@gatyi28]

Cool. That what I’m looking for a similar setup . I have two hoverboard Motor with two 350w Motor Controller . I have a Ppm receiver from a rc helicopter . Will it work if I just connect the receiver with a throttle signal ? Or how should I connect it ???

[@aavesh.bagwan]

please can you share motor and motor drivers you have used

[@venkidusamykandasamy453]

clear explanation great work

[@buster2725]

how do you test them on a chair where you cannot take brakes apart? how much voltage and which wires go where,do those have brushes? you gonna take em apart?

[@sototech1]

Hello do I have to use that type of remote?

[@user-pc8ql6yp2x]

I want to order this circuit. Recommend how to order i live in thailand

[@larrywilliams6774]

Where did you get the remote control?

[@WV591]

Have you done a voltage leak test on the 2x32?

[@arthurkuntz1525]

DOES ANYONE KNOW HOW TO WIRE UP 4WD RC LAWNMOWER

[@israeldelatorre7331]

Great work!

[@mdkhalid4797]

How to adjust rc transmitter or received ...? Make vidio

[@markr.2781]

I am having trouble with that, also.

[@MrCoder101]

Can we use LiIon batteries on this? More power density?

[@mikejohnson2659]

With a complete battery powered wheelchair, how do you add the sabertooth into existing wiring and still have full use of built in wheelchair battery charger?

[@markr.2781]

Google sabertooth 2x32 image.

[@madhuvajrakarur7175]

Which type of motors used in this video

[@jaxsonroy6894]

Madhu vajrakarur they are from a jazzy wheelchair if I remember correctly

[@williamgunter5199]

I commented before watching the entire video. My apology. I do want to know if the batteries are deep cycle. I have two 12 volt 12 ah batteries...is there a major difference?

[@geekoutgarage8725]

I believe these are the ones I am using or very similar. Seem to work great. here is the link . amzn.to/2FrtsJ4. Thanks

[@buster2725]

they are gel cell only to be charged by a 5 amp charger takes a long slow charge