RC Crawler Shock Series Part II Shock Brands in 4k 2022

[@Smile-N-Bear]

Really enjoyed the info! Knowledge is power. No matter what your try'n to achieve! Just cause it's expensive doesn't mean it's good! Enjoyed the visit Brother! Right On!💪

[@Stickies72]

Thank you so much Kevin Brother!!! I am shifting my channel to be not just running videos but to have stuff to try and help people avoid making the same mistakes I have.

[@AddamsPlayground]

I am with you, those Element shocks are some of the smoothest I have built and go together really easy. Their stock springs work very well too but offer a few additional spring rates to accommodate heavier or lighter trucks than stock. I mostly have stock shocks on most of my rigs but if I were buying replacements I would go ahead and pick up the Element ones!

[@Stickies72]

Thank you Addam Brother!!! I love the Element shocks, I even bought a set of the Factory team for my Rover build. Having gone through a few sets of springs before i got the right ones was important, that trucks works so good for how heavy it is.

[@marekmarko2274]

Guys I can't find those element shocks on internet,, is there some another name for it? Thank you.

[@AddamsPlayground]

@@marekmarko2274 Element RC Factory Team 10x90mm Enduro Shock Set Part#: ASC42078

[@NAWARESKIF]

Hi . Can you suggest for me good shocks. My car mn78 -1/12 jeep cherokee . . Thanks

[@Stickies72]

Considering this looks like a between 1/10 and 1/24th scale possibly a 1/18th scale I would look at the shocks from Traxxas for their TRX-18. They have a nice set that would likely fit and will give you a nice oil filled shock which you would be able to use different oils to get the setup just right. thank you very much for watching and leaving a comment!

[@BradypatRC]

Great video and info, thanks for sharing 👍🏻

[@Stickies72]

Thank you so much Brother, am really trying to create more content to help people. Times are getting tougher and I think it is going to get worse, if i can help people from wasting money on things I am all for it.

[@BradypatRC]

@@Stickies72 I understand buddy. I’m currently working on my channel with some 1/24 course obstacles that I’ve made with bits I’ve had laying around and bits from household waste. Hopefully it will help people to understand that it can be done without spending too much money or any at all. 👍🏻

[@riffraffsrc]

Hi Rich! Great review and comparison between shocks brands brother! Nice job! 💯🤜🤛

[@Stickies72]

Thank you so much Riff Brother!!! Hope all is well my friend!!

[@RcNickster709]

Nicely Done rich. Will be very informative for people for sure. :) Learned a couple things myself. ;) THanks for sharing

[@customdrums]

Great info, I have element shock on my ecto but they leak a fair bit. They have the plastic caps on them. I bought the rebuild kit but hesitate on the aluminum cap because of the price. Do you think the caps would stop the leaking

[@Stickies72]

If the cap is leaking then yes the aluminum should put a stop to that as the o-ring in the cap will have a better sealing surface. If it is leaking from the bottom seals then try and use a healthy amount of green slime when rebuidling the shocks. I am a big believer in the green slime from associated, throughout many years of racing it has been part of my shock building and re-building process. Whatever it is they use to make it really works. I have tried a few different things but the slime seems to have something in it that keeps the o-rings from wearing out so quickly and it helps to keep the seal nice.

[@vancebergersen13]

Thank you for the info. Looking fir a good set of shocks for my custom scx10ii build

[@Stickies72]

I would reccommend either going with a set of Element or Desert Lizard if you not going super scale. For super scale I would check out check out the SSD or Proline pro scale shocks. I have had good luck with all of these.

[@vancebergersen13]

@@Stickies72 thank you so much buddy. I'm gonna try the elements the ones you had look really good 🙏

[@KurtsRCs]

Great video I have only used the Elements and Traxxas shocks and I would definitely buy both again. The Traxxas shocks do stick but one you push them that work awesome

[@Stickies72]

I have a bunch of freinds who swear by Traxxas shocks, and from what I have seen they are really good. I just have never gotten any yet, but at some point I am planning on going to Dixiland Rc and getting a set of his modded ones. Thank you so much Kurt's brother!!

[@fishnrc294]

Your review of the King shocks was spot on I have a set & I’m not impressed & the shaft seems very thin to begin with. No less but there on a RC that I don’t take out very often. Stoped by to check your reviews I’m getting new shocks for the ew Vanquish RTR.

[@Stickies72]

I have a vanquish Phoenix kit I built several .oaths back and I am pretty impressed with the incision shocks, I also really like the ssd for vanquish. Vanquish has a skinny shock mount so a big bore like Traxxas or Element won't fit. I love my element shocks more than any others I tried.

[@STRYKER_PT]

same here. king bad ones i have in my life, scx10ii plastic ones works better for me (less leak)

[@Stickies72]

@@STRYKER_PT There are good ones out there, the Element and Traxxas shocks are good at a decent price and leaking is much less of an issue with both of them. These king shocks are just not good at anything other than looking the part. Thank you Luis!!

[@jeremyoshea7941]

I’m not positive at all, but the SSD shocks are those pretty much the same as pro line. I have a set of pro lines that I just use for my vehicle that has leaf springs. I just really like the distance in travel I don’t use the springs them self, but there’s no leaks. I would like to try them out on the CX2

[@Stickies72]

I think ssd and proline are very close, I just got a set pf proline and side by side they are not exzct but really close. I like the quality of the proline, they are what I expected from them. Thank you very much!

[@krashkingrc9715]

Awesome video Rich great job shocks look great move great

[@Stickies72]

Thank you KRash Brother!!! I am going to try and do a bunch of videos like this over this year. If you have any feedback good or bad please let me know, I want to keep improving how the videos work and look.

[@krashkingrc9715]

@@Stickies72 I think you did a great job and very informative take care and keep up the great work

[@nickwilliams6869]

I have a arrma voltage will crwler shocks work on it

[@Stickies72]

No, you will want to go with something that is more like a racing shock. I would look at shocks for 1/8 race buggies, like an associated, tlr, or xray. They will give e you the best performance and help to make the voltage more drivable Thank you very much!

[@nickwilliams6869]

@@Stickies72 ok thanks

[@nickwilliams6869]

@@Stickies72 i just ordered some hobbypark it says its for 1/10 scale offroad monster trucks

[@Stickies72]

@@nickwilliams6869 let me know how they work, I have had my eye on them myself.

[@islandrc-duke1972]

great video and information on the shocks

[@Stickies72]

Thank you Duke Brother!!! It has been fun making this series, I think I'll have another couple videos on shocks and then I am going to move to link geometry and weight distribution. Am hoping to have the entire series go throughout the year.

[@TheAmericanUhate]

You didn't mention pro-lines shocks?

[@Stickies72]

I have not tried any Proline shocks myself, I know a few people who love them. Since I had not had any experience with them myself I did not want to guess on how good they are. From what people have told me they work very good, I have ordered a set of them for my Phoenix build and a set of Kronix as well. Just waiting for them to ship out. Thank you very much AmericanUhate, great name btw!

[@TheAmericanUhate]

@@Stickies72 A phoenix build is what I'm looking for shocks for too. Haven't even ran it yet and one shock is leaking already lol. Right now it's between trx4 shocks or proline shocks. Definitely want 90mm to 100mm. The stock shocks on my trx4 has been perfect for over a year. Only time I had one leak was from a nasty roll in moab which bent a shaft and broke a rod end lol. New shaft & oil, still doesn't leak. I really hate leaky shocks lol

[@Stickies72]

@@TheAmericanUhate TRX4 shocks and Element RC shocks are my two favorite shocks. I have sets of both on a couple rigs and they have both been almost perfect. I run the TRX shocks on my LCG rig right now and they have been perfect, not even touched them once in 3-4 months now. I think I would rank TRX and Element my top 2 for sure.

[@rustyachenbach1233]

I'm a Marine I'm interested in getting involved with Operation Charlie volunteering time setting up a local chapter ect.

[@Stickies72]

Rusty, you can reach them by going to their website at O11C.org. All of the info on how to get involved is there. Thank you for your service, God Bless.

[@rustyachenbach1233]

@Stickies RC Thanks brother and thank you for the awesome videos

[@CoachD386]

I had desert lizards on my scx10.2 they were awesome…

[@Stickies72]

I really like the Desert Lizards as well, I did not have the truck with mine on it to show so I made them an honorable mention at the very end. The only knock i have on the lizards is I did have to drill a few extra holes in the pistons as they were really dampened, even at 20 wt oil they were super tight. After adding a few holes though they work amazing, and I have run them solid for a year without having to rebuild them. Thank you 3d RC!!!

[@CoachD386]

@@Stickies72 it’s CoachD Rich

[@Stickies72]

@@CoachD386 AHA, Very sneaky Coach D brother!!! Thank you so much my friend, I truly appreciate the support!!!

[@ryurc3033]

Its hit and miss with the cheap ones. But I'm a big fan of the desert lizards once they are set up.(sometimes it takes a few tries) I really like my trx4 shocks mostly because they aren't leaky, and have a good Ballance right out of the box.

[@Stickies72]

The Trx and Deseret lizards are two of my favorites, the Element are also good for staying sealed. I have also had some good luck with rclions Amazon specials. Thank you!

[@carloseblanco]

Todo mi respeto con la Operación Charlie. En mi pais nadie piensa en los veteranos.

[@rcplaytime]

great info dude😀👍👍

[@Stickies72]

Thank you rc play time, I have a couple more shock videos to come. A lot more info ti share!

[@usbsol]

Links to everything but shocks?... I am confused... 🎅

[@Stickies72]

Sorry, A while back I took all of the links out as they were all broken.

[@kellykuretich6366]

😎😎👍👍

[@Stickies72]

Thank you so much Kelly Brother!!!

[@trevorcourt1403]

i must of owned every make of shock they all leak

[@Stickies72]

The Element factory team are the only ones I have had that have not leaked. I have 2 sets of them and so far I have been lucky. Thank you Trevor!!!!

[@trevorcourt1403]

@@Stickies72 ah ok thanks

[@trevorcourt1403]

i did put 1 extra o ring in some gmade xd series shocks in cartridge & they don't leak now but are a little stiffer but i can live with that. thanks trevor from england

[@Stickies72]

That is a great fix, after many years in Rc it still amazes me how many new ideas pop up. Going to take apart my RC4WD Kings shocks and try adding an extra ring in there to see if that fixes them. Of all of the shocks I have ever tried those were the ones that disappointed me the most. Thank you Trevor, send me an e-mail at [e-mail] and I'll get some stickers out to you!

[@Cyberwendy]

don't move your hands so much, talking with hands

[@Stickies72]

Hehe one if those subconscious habits. Thank you Wendy!

[@HBFTimmahh]

one last is the Pro Line Scaler shocks. They are also worth the pennies (65 a pair). I really like the SSD Scalers myself.

[@Stickies72]

I just got a set of proline and they are pretty nice. I am thinking of doing an updated video with more shocks tested. Thank you very much HBF!