Рет қаралды 5,733
This is a quick recap video of my first time building a RC Drift Car from Pandora AE86 Trueno Body.
Tools I recommend using for first time build:
1. X-Acto Knife - I would recommend using a new blade the plastic is pretty thick and a dull blade can be dangerous to use.
2. Painters Masking Tap - The Body does come with masking stickers but they are very sticky and hard to apply correctly. I would put masking tape on then cut out the edges with your X-Acto Knife to get a nice paint line.
3. Paint- I used Tamiya Spray Paint (TS26 - white, and TS-6 Matte Black) you will need minimum 2 Spray cans to fill in the body I would recommend getting 3 (the third to use to clean up any mistakes.)
4. Model Nipper Cutter - You dont need this tool but I recommend to be able to cut around the fenders and clean up the plastic cuts
Stay tuned for Part Two, I assemble the Body and Wheels
Check out our other products at ▶︎
www.f2suspension.com/
Subscribe ▶︎
kzbin.info...
If you have any questions about our products please contact us at:
support@f2autolife.com
and follow us at:
INSTAGRAM: / functionand. .
FACEBOOK: / functionandf. .
Song - F2F by BLKFLEECE
Thank you!