RC EDF afterburner - proof of concept

I used a 35mm RC EDF out of a MIG. I took an empty light gas refill can and put in a special shaped brass tube as burning chamber. I attached some second inner metal tube to avoid burning the gas refill can and to allow a cooling effect.
For this proof of concept, I used a modified blow torch for the butane gas regulation.
Gear I used for this:
• EDF 35mm with 9000kv Brushless Outrunner Motor out of a MIG 15 from Hobbyking: hobbyking.com/...
• BLHeli Series 12A ESC from EMAX: www.emaxmodel....
• Turnigy Nano-Tech-370mah 3S 25 ~ 40C Lipo-Pack: hobbyking.com/...
• FrSky VD5M 2.4Ghz 5CH Receiver: hobbyking.com/...
• Old Graupner TX with obsolete FrSky 2,4 GHz module
• Blowtorch
• Empty lighter gas refill can
• Tubes, pipes and glue
See discussion on RC Groups: www.rcgroups.c...