RC ESC 20A Brushed Car Motor Speed Controller

[@sonarfleet2375]

Excellent video. Congratulations

[@albertmarkish]

Thanks for the demo!

[@jonathanardon3784]

Tnk u 4 demo

[@hyperjohn6627]

Thank you for making a video, but the music is horrendous! It would have been much better if you talked about the product.

[@rafanievesarriaga4783]

It helps me a lot. Thanks you

[@marcelschwantuschke4083]

Hi. Ich habe alles richtig angeschlossen und auch eine funktionierende Verbindung zur Fernbedienung aber wenn ich einschalte dann drehen sich die Motoren sofort. Auf Beschleunigung,Bremsen,Lenken reagieren sie aber wenn ich nichts mache laufen die motoren auf voll last. Was könnte das sein..??

[@rcgusar3425]

Спасибо большое тебе за помощь в подключение

[@mro2d1]

it's true I also buy some in gearbest and they do not work with 2 cells they only serve with a 3.7v cell, if you use 2 cells in series 7.4v the engine vibrates and the accelerator does not respond

[@dimitrikasztanovics4959]

I need help please!!! Is it possible to install this esc in my JJRC q60 with standard electronics and battery? And if so, how to do it? Any help would be greatly appreciated!

[@1australianbeacon]

How do you bind them I want to use it to fly diy plane.. does the digital flysky controller pick up the coading????

[@nomusicrc]

Music is horrible

[@simtcr]

are you providing 2s voltage to the ESC? And is that a normal 130 brushed motor? Will the 130 brushed motor work on 2s voltage?

[@Manly]

Is there a Voltage cut-off feature?

[@dragostns]

Mine is blinking red... How do i fix it? Edit: nevermind... Was the battery

[@jasedobson2793]

so is mine how did you fix it?

[@kyte4948]

Fix?

[@analyncaasi3530]

Sir what is the purpose of the small switch the small one without wire

[@JaLawPT]

Brake on/brake off

[@dammikarathnayska3032]

20A esc eka CT 400 rimodekata wada karanawada

[@wolffin100]

These ARE NOT LIPO SAFE , please use either Nimh or use a low voltage lipo buzzer , stay safe RC friends 👍🏻👍🏻

[@EdRandall66]

Please explain, what does 'LIPO SAFE' mean?

[@Udjeox]

Most of the parts links are broken. Can you please update the links. Thanks.

[@luoncuoihaha4342]

which chanel on the receiver connect to the esc plug, Sir?

[@tuga4D]

You may connect on 1, 2, 3 or 4 channel.

[@luoncuoihaha4342]

@@tuga4D thank you

[@onlyfacts7396]

Sir two ECS use Ker sakte hai one receiver me

[@ponrajkrishnaj]

weather it can work with 12v dc 775 motor

[@miguelwon]

Where can I find that regulator you are using to control the speed and direction?

[@tuga4D]

You can buy online here www.banggood.com

[@miguelwon]

@@tuga4D Can you please describe what it is? Otherwise, I'm still blind about what to look for... Is it a PWM signal generator?

[@ashishbomble8547]

If we have 2 motors do we need 2 ESC? Or 1 ESC is okhey

[@xxterpzxx581]

You find out yet?

[@hifromkevin714]

Hi! What is the connector from the ESC to the motor called? Thank you!

[@KJSutube1]

I believe it is a JST plug connector - www.amazon.com/gp/product/B06XRBKSY2/ref=ox_sc_mini_detail?ie=UTF8&psc=1&smid=APHB2NWNKDSBL

[@dvvvideo]

Revers ?

[@ytchannel2057]

Can we use this ESC with bigger 12v 5000rpm brushed dc motor.

[@randomstuff-wg6nj]

size of the motor ? keep in mind this esc can just output 7.4v.

[@omkarkhade4602]

Yes , there are different ESC for different motors. You should check out that which Esc supports which motor.

[@nizamismailpaklong3533]

Hye, can i ask you one quection, if i want to make two dc motor for exscavator treks can you explain for me, please, tq

[@dammikarathnayska3032]

Oya motor 4k control karnna barida

[@cadcam9592]

max rpm?

[@brsrc759]

Why you bother to show us that there is an extra little switch on the side of the board but don't bother to tell us what it does?

[@amadorgonzales2608]

What’s the switch for?

[@nomusicrc]

It shows you in the video with or without brake

[@nomusicrc]

THE MUSIC ISNT LOUD ENOUGH

[@rayrobinson8239]

Why the awful music?

[@northernfreelance5788]

No stearing?

[@neilhamilton2621]

How do you bind them