RC MN128 JEEP WRANGLER BLACK, CRAWL 1

This MN128 Jeep really is an excellent base for a 1/12 crawler. Lots of metal upgrades available for the already establised MN86.
Although is very good standard, some lower down weight helps alot. This is where I had previously gone wrong on my MN86. Which will now have a comeback.
Upgrades so far.
* 540 35T injora motor. Needs to be short version to clear the body. Adaptors available on Amazon or Aliexpress for the 540 motor to the standard gearbox
* Metal driveshafts
* Aftermarket adjustable shocks
* Metal 1.9 beadlock wheels
* 90mm Tyres. Not the softest or the best grip. But they look mean...!
* Metal axle links
* front axle moved 5mm forward to give tyre clearance. 3D printed spacers in the links to increase length
* Metal sterring horn to replace servo saver. It 'saves' too much & then fouls the front bumper when the axle is moved.
Still standard ESC, servo & transmitter. They are pretty good out of the box. Best so far for MN models.
Lighting is still standard.
I bought a spare gearbox to make the motor swap quicker & easily reversed. Note that the slipper clutches are supplied loose. I tightened this one, but it still slipped on some climbs. Needs another tweek.
I was very impressed with this truck on this first run. I got loads of footage. So expect to see lots of this one & the grey Jeep soon.
Thanks for watching.

[@satorrotas]

Really splendid jeep, I like it 😍 Very good rock crawling and nice video 👌

[@RC3DPrintAdventure]

Thank you! 👍 These are great crawlers for the money with a few small mods. Thanks for watching & commenting. 👍

[@satorrotas]

@@RC3DPrintAdventure 😉👍

[@cat-cambodia1801]

Nice RC truck friend 👍🤠

[@RC3DPrintAdventure]

Thanks 👍. It is a very nice truck 😁

[@maxmixrc]

Great rock crawling, nice jeep 💯👍👍

[@RC3DPrintAdventure]

Thank you very much. It's a great smaller crawler..! 👍😁

[@DSPIC444]

Can't wait to get mine in the mail! 😃👍🏽

[@RC3DPrintAdventure]

😁

[@Fonzierc]

Superb work great run

[@RC3DPrintAdventure]

Thank you very much! These are great crawlers for the money with a few small mods. thanks for watching & commenting. 👍

[@fatbiker5159]

Top notch..!

[@RC3DPrintAdventure]

Thank you..!

[@Fonzierc]

Superb

[@RC3DPrintAdventure]

Thank you very much for watching & commenting. I really enjoyed driving this truck..! 😁👍

[@rcsbyrich3035]

Wow that looks awesome 👌

[@RC3DPrintAdventure]

Thank you very much. These trucks are good out of the box, but with a few cheap mods they are really good. This Jeep surprised me wheat it could climb even with a slipping clutch..! Thanks for watching & commenting. 👍

[@lucianooliver9729]

Whats scale of pilot ( female figure)? 1/18 or 1/12?

[@RC3DPrintAdventure]

1/12. Black widow figure.

[@rcnew1600]

Esc pake apa bang?

[@RC3DPrintAdventure]

Masih standar atau stok ESC. Bekerja dengan baik.

[@candratrikurniawan6768]

what tires and wheels did you use on this rc bro?

[@RC3DPrintAdventure]

Hello, the tyres I bought off ebay a couple of years ago for the MN86. They are 90mm diameter for 1.9 inch wheels. The wheels are just typical cheap 1.9 metal beadlock wheels I got from Amazon. The rims were silver, but I painted them grey. Hope that helps. Thanks for watching. 👍😁

[@d_riez8190]

Ukuran roda??

[@RC3DPrintAdventure]

Velg 1,9 inci dengan diameter ban 92mm.