RC PLANE CRASHES & MISHAPS COMPILATION - TBOBBORAP1 - 2016

CHECK OUT OUR VIDEO PLAYLIST OF OVER 63 CRASH VIDEOS HERE -
www.youtube.com/watch?v=6Q1Wp...
CHECK OUT PART ONE OF OUR 2017 RC PLANE CRASHES COMPILATION VIDEO HERE -
• RC PLANE CRASHES & MIS...
CHECK OUT OUR VIDEO PLAYLIST OF OVER 60 PLANE CRASHES HERE -
• RC PLANE CRASHES & MIS...
WELL FOLKS ITS THAT TIME OF YEAR WHERE WE TAKE TIME OFF FROM WORK AND CHILL OUT WITH FAMILY AND FRIENDS THEN SIT BACK AND WATCH THE ILLS OF OTHERS IN THE FORM OF A CRASH VIDEO !
I WOULD LIKE TO THANK ALL MY SUBSCRIBERS AND FRIENDS FOR THEIR SUPPORT WITH OUR CHANNEL SINCE IT FIRST STARTED BACK IN 2009 !
WE CANNOT BELEIVE WE NOW HAVE FIFTY THOUSAND SUBSCRIBERS AND HAVE HAD OVER FIFTY SEVEN MILLION VIEWS AS WELL !!!!!!!!
ALSO OF THE 1655 VIDEOS THAT WE HAVE UPLOADED THERE HAVE BEEN SEVENTY THOUSAND SHARES WORLD WIDE - WOW !
DEANO AND I HAVE HAD SUCH FUN WHILE FILMING AT THE RC SHOWS AND CLUBS HERE IN THE UK AND HAVE MADE MANY MANY NEW FRIENDS OVER THE PAST SEVEN SEASONS ITS BEEN QUITE HUMBLEING AT TIMES,
THE MOST HUMBLELING MOMENT OF ALL CAME AT THE WILLIS WARBIRDS FIGHTER MEET BACK IN JUNE WHEN UNBEKNOWN TO DEANO & I THE TWO TEDS - MATT HARROWVEN AND CHRIS WILLIS HAD ORGANISED A FUND ON FACE BOOK ASKING FELLOW MODDELLERS TO MAKE A DONATION TOWARDS UPGRADING ALL OF OUR COMPUTOR EQUIPMENT AND CAMERA AS A VERY BIG THANK YOU FOR ALL THE VIDEOS WE HAVE UPLOADED OF THESE GUYS & GIRLS OVER THE PAST SEVEN YEARS AT THESE SHOWS !
IT WAS SO HUMBLEING THAT I MIGHT HAVE CRIED SEVERAL TIMES DURING THAT AFTERNOON - LOL,
AS IF THAT WASNT ENOUGH OF A SHOCK WHEN WE FINISHED FILMING ON THE FLIGHT LINE OF THE LMA ELVINGTON SHOW TWO WEEKS LATER DAVE & ANDY JOHNSON & KEN McCORMICK PRESENTED US WITH A CARD WITH MORE DONATIONS IN IT - GOBSMACKED AGAIN TO SAY THE LEAST, WE WERE THEN GIVEN SEVERAL CASH DONATIONS FROM MORE FRIENDS AND THE TOTAL DONATION FINALLY CAME OUT AT OVER £1650 !!!!!
WITH THIS MONEY WE BOUGHT TWO NEW MONITOS AND ALSO A TOWER COMPUTOR AND WILL UPGRADE THE VIDEO CAMERA SOON,
ANOTHER MILESTONE IN OUR RC HISTORY WOULD BE THAT OF DEANO BEING OFFERED A POSITION AS A DISPLAY PILOT IN THE HORIZON HOBBY DISPLAY TEAM ALONG SIDE TEN OTHER PILOTS INC AZZA STEPHENS & SONNY MILGATE,
SPECIAL THANKS FOR THIS GO TO ALI MACHINCHY, MARK DIVITO & OF COURSE AZZA STEPHENS AND HORIZON HOBBY,
AGAIN MANY MANY THANKS TO YOU ALL (TO MANY TO NAME) FOR YOUR SUPPORT AND GENEROSITY OVER THE YEARS AND WE LOOK FORWARD TO THE COMING SEASON AND MANY MANY MORE -
BEST REGARDS PETE & DEANO,
PLEASE LIKE US ON FACEBOOK AND SUBSCRIBE TO OUR CHANNEL TBOBBORAP1 AND FOLLOW US ON TWITTER NOW AND KEEP UP TO DATE AND WATCH OUR HD QUALITY RC MODELS VIDEOS AND PICTURE UPDATES OF THE MAJOR UK RC SHOWS AND CLUB FLY-INS AT -
/ tbobborap1-1. .
/ tbobborap1
/ tbobborap1
UPLOADED ON 20-12-2016,

[@MikeZak101]

I'm in tears, can't remember the last time i laughed like that

[@aaronjones8254]

My heart breaks when a plane is totaled but I also laugh and thank god it is not mine

[@skippajack]

Growing up in Hawaii my dad was into RC in the 60's , 70's and 80's and I was always surfing , now I turned into my dad and I fly, lol. He would build beautiful planes and bring them home in pieces on occasion. Now with foamies that are easy to build and are great park fliers , the hobby is much more affordable for newbs like myself. Being in the visitor industry in Hawaii I have to say that Aussies have the coolest attitude in general as a people and it shows in the way they are dealing with these crashes of there beautiful planes. Simply amazing, thanks for sharing Brah! Skippa

[@p330hne]

skippajack this is in uk

[@skippajack]

Thanks for the correction, these guys still have a great attitude! LOL

[@kevins1114]

This brought back memories of an R/C Ju-87 I spent two years scratch building, only to lose it on the first flight because another guy ignored the flight rules and "tested" his radio gear while I was flying. His gear was on the same channel as mine...

[@gooniac33]

All of that was rather painful to watch.....

[@bwxmoto]

Looks like some pilots are much better at building than flying.

[@johnsnowfreedomnorulers4830]

joy to watch pissed my pants laughing

[@davidregan9872]

I agree! I've seen some brand new foam planes that were toasted on their first flights. I've toasted a couple of nitro trainers myself. You feel like crap, and sometimes stupid because it happened. I lost one because my transmitter had a short from the battery. I didn't know what happened until I looked at the wires weeks later.

[@DevronCariba]

gooniac33 jm

[@avery1d626]

gooniac33 my wallet was crying

[@panther105]

You guys land better on one wheel than when both are down. Something in that.....

[@aryooon1493]

panther105 true, true

[@anncarson5260]

i know dummy

[@RCScaleAirplanes]

WoooW ... first and last crash was horrible. Too sad

[@tbobborap1]

thanks m8, its a shit hobby some days !!!!!!!!!!!

[@RCScaleAirplanes]

That's right. Especially if you do not have to disassemble your plane for the journey home.

[@tbobborap1]

lol - been there done that m8 !!!!!!

[@robertgaudet7407]

That recovery on the second one though!

[@arturocavazos7604]

😅 awesome air planes

[@PC9JEFF]

I had an Ultimate biplane go in like that at about 70mph in knife edge. Saved nothing but the tail to mount on the wall. It hurts. In all the years of seeing R/C crashes, I have never seen a cylinder head bounce down the runway like that. Damn good filming Pete! J

[@tbobborap1]

ouch on the ultimate m8, I wouldn't have noticed the cylinder head if I hadn't actually heard it pinning of the tarmac ! steve burnt his fingers when he picked it up - still hot ! john gave me permission to post this crash bless him,

[@glennojordan]

Very sad and heartbreaking to see this😢

[@lknanml]

Pucker landing with the Vulcan. Very nice save.

[@BLThackrey]

That opening crash ! The clatter of the dslr shutter going like the era machine gun that brought these wonderful looking aircraft down ... thought evoking .

[@JaccovanSchaik]

One thing I've learned from these clips: stay away from Corsairs.

[@nibblecraft6841]

ha

[@atillarafi2483]

LMAO XD

[@crazycrow3378]

Stay away from the most beautifull WWII fighter ever built? NEVER!!! 😉

[@GeosJackson-fi1pd]

Nah mate it was the spitfire

[@JorgeMolina-ly3zd]

And don´t even get close to a fucking Lancaster

[@MrStamperh]

Number one plane to avoid. Corsair. Absolute insanity

[@GeosJackson-fi1pd]

MrStamperh or p-51

[@Sammakko7]

MrStamperh hellcat*

[@leniterfortis4832]

That corsair landing was amazing.

[@AitorBeobideRubioSpotters]

Una pena de accidentes! Muchos se podran reparar. Gracias por compartir

[@halloweenjack4482]

Today I've discovered what the world needs...and that's someone who can make a decent landing gear for rc aircraft!

[@ACG_Steel]

Man that lancaster bomber has some gear issues

[@F-14DSuperTomcat]

0:47 Hold J to exit your aircraft

[@ShockeWulf190]

War thunder is now irl

[@TurtleClashersRBLXPRO]

mmm satisfying

[@transgenerations]

Aside from the obvious pilot errors, it looks to me like retract design absolutely stinks.

[@adamharvey6373]

Lauren Robison it's just the heavy models that they carry

[@jv4read1]

more up elevator on landing and ditch the retracts

[@mikesuch9021]

Lauren Robison More times then not it's the servo's or linkage that causes the trouble.

[@WolfSniperM92]

+Red where do you get the better landing gears at?

[@aserta]

It's weight saving, otherwise, they'd need really big engines. You have to pick and chose. Personally, i liked the ones a South Korean (only jets, the name of the channel escapes me) made here on KZbin. Compressed air burst and instant lock design. The landing gear itself was beefy, but the compressed air part was not. Over all, very light. There's basically one control. On. And that's it. Downside, you need to charge it every time...forget.. and well, that's that. ALSO, it's not the expansion design that sucks (since most are scale copies) rather the deployment system. From what i've seen, from blogs and the such, people...just complicate things unnecessarily, for whatever reason.

[@123cp8]

Two lessons that I've gotten from this video: 1) Never use retracst and 2) never use tail-dragger-type gear! ;-)

[@tbobborap1]

lol - yep

[@ethanhiggins4887]

Or know how to fly a tail dragged properly and be able to handle a gear malfunction without doing something stupid

[@lmdetect]

haha....yeah Christian, you could do it that way, but they are fun to learn. Everybody screws up once in a while. Even the know it alls. lol

[@dkjens0705]

The Lancasters coming in on one main wheel is very WWII realistic.

[@bearnicholas3830]

some great landings here even if not perfect. Love the save on the vulcan...

[@tobymaltby6036]

6:13 - and that's an excellent demonstration of why, in real life, the full-size version was called the "Ensign Eliminator".....

[@tysoncott7402]

Flew r/c for 25+yrs and got out of it, after watching this video i still dont miss the hobby, even when everything seems right & going well it all can come crashing down (literally) at any moment

[@darkdestroyer8313]

awful lot of socks and sandals there.

[@mmkm8459]

kzbin.info/www/bejne/nYaUiX6Xg61sg68 Sharlandpa

[@ClingyCrab]

Alpha male attire

[@paulbutcher822]

I loved the crash where the cylinder head rolled away. Made me laugh.

[@Snyper1188]

Damn, some of those were really hard to watch. My heart weeps for those pilots who have to start from scratch all over again.

[@donkeyearrs]

Great CPR!

[@babadrumsantho]

who else love when they are totally destroyed?

[@stroppyrc9409]

Hmmmm Got to love Retracts!!!

[@bearnicholas3830]

outstanding one legged hurricane

[@ska2dt]

I enjoyed the saves as well as the crashes.

[@wmdayman]

Heartbreaking but helps in learning what not to do or what can go wrong.

[@lanceanderson1417]

I'm sorry for your loss.To me the video is positive it shows the skill needed, to build , pilot, and come back again and to do it again . I can feel every move ment from your X/T and the gut wrenching feeling your baby's Gone. I can speak this because I know this. I too fly R/C ,for forty years. Thank You for the well done video, a lot of us have walked this road. Sincerely Lance Anderson ( Maine)

[@tbobborap1]

many thanks lance

[@thomashockin4128]

So sad ........some of those belly landings were done well by the pilots though !!!

[@tbobborap1]

thanks tom

[@SubToTripleThreatRC]

Build, crash, repair (or burn), repeat. Thanks for sharing g! G.

[@tbobborap1]

story of my life G - lol

[@SubToTripleThreatRC]

We are in good company g, the "club" is bigger than you think!

[@tbobborap1]

oh yes I can imagine m8

[@squach6239]

TripleThreatRC That first one with aerobatic biplane .... Oh my God that looked so doable and it just disintegrated!!!! The left hand main gear looked like it Might be reusable! So terrible

[@antobilic2722]

TripleThreatRC enzo

[@jrcrawford4]

Never was so much owed by so many to so few....

[@Spawn-td8bf]

Pete,at least some can have a laugh. I love the mouth to mouth performed on that "pilot". I also appreciate the fact that you have the ability and presence of mind to not target fixate and catch the sometimes tragic end to someones prized machine. Most appear as they will fly again, but I remember when you first aired the opening clip and were most considerate enough to get the owners permission to do so. It stated that fact just before you showed it. These clips show we all belong to a large group of "duct tape" owners. I could overhear one person conversing with the owner of that Sea Fury "you could just wrap a little tape around here" or something to that effect. It reminded me of a bush pilot who was hunting in Alaska, left his campsite, and when he came back, discovered that he had lert something in the plane that a bear really wanted. The bear tore the fusalge to heck. The pilot radioed his friend to bring duct tape and plastic sheeting. He rebuilt his plane and flew out of there. Happy Holidays, keep the rubber side down and God Bless, Paul from Florida.

[@tbobborap1]

thanks paul, yes the feelings of pilots do vary indeed, one pilot destroyed a model four years ago and still wont let me show the footage because of the bad memories it will awaken !

[@billp4]

0:13 THIS is what we want to see!

[@wmatheson1611]

OMG SO COOL

[@Siren851]

Fantastic, unblinking videography, even of such morbid subjects as this. Again, the sound is great. Vic M.

[@tbobborap1]

thanks mick

[@kadytoast5190]

gorgeous corsair landing at 1:00

[@1337acab]

0:56 wait let me help

[@bearnicholas3830]

hate to see all these hours of work become kindling!!!!! well done on the corsair

[@donaldparlettjr3295]

The Sopwith Camel with the pilot was hilarious, yeah the poor guy had to endure the mouth to mouth

[@tbobborap1]

lol - the mouth to mouth probably killed him he next day

[@roobsthedoobs2429]

awesome

[@rogerbayford8323]

Now I know why I never use retractable gear~~

[@bliglum]

Saved the best for last eh? Holy crap, that Corsair.. OBLITERATED!

[@jack_7840]

just get some tape... and tape that round~ my field repairs in a nutshell XD

[@dentidens7834]

i know this trouble - but I love this hobby

[@atillarafi2483]

you are not the only one

[@Frankinsteinguitar]

The bigger they are, the harder they fall.....and the bigger mess they make.

[@spg77777]

crashes yes... but many very deftly done saves.

[@zwanso]

These pilots must be in the scale heavy weights. Heaviest plane I've ever had was a 2 meter F3A- barley 7 quarter lbs. If I could only get my hands on a proper scale Hawker tempest kit. Great footage. Painful to see in the moment but I learn great deal every time!

[@tbobborap1]

thanks zwanso

[@Megalodon64]

Man those taildraggers are so vulnerable to prop strikes. LOL

[@lanceferguson7159]

Lol on the mouth to mouth bit!

[@julianducros8952]

6.03 corsair sounds lovely for a few seconds had that happen to me a few times

[@user-nn7pv9pk4v]

Foamies make life so much easier

[@MrCrazyjoe259]

Must be very heartbreaking for the builders/pilots, but i guess its part of the hobby! It takes some serious determination to rebuild and fly again. And nobody said it was cheap, either! Here I am disappointed that I ordered a few parts that i didn't need for my RCs and its past the return date! lol

[@simply-phil]

Oh Shit, that hurts 😂 Greetings from bavaria

[@mikemac2888]

5:29 - did he live?

[@InTheDogHouse3DPrinting]

Pilot down at 5:03 and no barn to be seen. Bad thing about those tail draggers is that you have to give them a lot of up elevator to keep them from nosing over. Must have been one hell of an impact at 10:46 to break the cylinder off of the block. That poor plane disintegrated on impact. I'm glad no one gets hurt by debris flying all over the place.

[@herik4006]

11:00 that moment when u realize that u need a broom to collect your rc plane

[@CharliChimp]

The time, money, and effort that must have gone into these things,... 'Oh the pain!'

[@OutaTimeFPV]

0:18 I literally just shed a tear

[@bigroy38]

OutaTime FPV hope Skip Stewart never sees it.

[@floofdapoof92akaafloofyboi22]

I'd love to go to these

[@davidgarrison6936]

@ 5:03 does anyone know if the pilot made it? he wasn't moving....so didn't LOOK good... 🙊

[@Suptom1]

D G yea he'll be alright

[@Verbally.autistic]

Sadly its been a year and the pilot succumbed to his injuries awhile back.

[@airgliderz]

Yes, and Barbie's pregnant...!!

[@davidgarrison6936]

ah.... i see he was Saved by a FIRST RESPONDER....GOD BLESS OUR HEROES....THEY RUN TO THE CRISIS....NOT FROM IT... nice legs too.... lmao.... 🙊

[@defmud80]

This is why I build and fly flite test planes.

[@stevejones9044]

to the nose over guys, when its down throw that elevator up to keep the back end down

[@mikeday62]

Several pilots contained herein...apparently do not grasp the hazard of an extreme sink rate on final approach.....until....DOH !

[@leeroyholloway4277]

Ive flown a lot of full scale and RC. One thing that RC'ers lack is training in holding a steady and stable approach, whether landing with power or dead stick. A good approach almost always insures a good landing.

[@ZeFluffyKnight]

Did that F4U's engine stall right after retracting the landing gear?

[@Basketcase_02]

That’s what it looks like!

[@julianducros8952]

Woh the one at the end pmsl

[@markmnorcal]

RIP all gave some some gave all 2016

[@alexfranco7325]

Broseph Hrjfkfjhxdj

[@tbobborap1]

thanks broseph

[@rcslay3rz126]

Imagine the crashes that were not recorded

[@achuuyang1156]

my little brother loves airplanes and it's cool

[@mikeholt7881]

Worst, and therefore best, compilation I've seen!

[@tbobborap1]

thanks mike

[@tune7333]

sea fury - gaffer tape..sorted

[@thegreatowl5282]

I love seeing balsa wood explode!!!!

[@stevesplace7230]

.03 I'm the pilot. I'm very cool.

[@brendongyde]

That would be cool to watch. Put some cap gun rounds on some little model machine guns attach to a servo.

[@marktalbot1305]

Heck, the size of these things - look at the first, if it was much bigger you could put a child in it! I actually wonder if that one could lift a young kid off the ground? But think of the risk, and the insurance!!! Marvelous machines, just terrific to watch, all those 100s of hours of pain to build it, of mastering it from the ground, with the real prospect that the darn thing will awol misfunction and do a kamikaze. Great stuff, many thanks, but do try to stop burying them!

[@michaelhartzell9758]

I think at the 10:47 Mark the pilot lost his plane! I don't feel so bad, but you need a video of someone hitting the windsock on the field, that would bring back memories

[@Hoshimaru57]

Note to self when designing RC planes: don’t worry about how they fly, worry about if they can land in 1 piece.

[@Not_honest_enough]

It's better as the landing gear fails then that the plane crashes and goes totaled

[@Frankinsteinguitar]

I got a 37 second maiden flight from my Hobby Zone Super Cub before total destruction. I'm trying another hobby!

[@odranreb000]

This is a general question to everyone who would like to answer me. In my city we use a paved runway only. I found many landings In this video use grass as runways which I think is more likely to damage the landing gears? The wheels usual get stoked in some holes and the surface is not so even. Why to they still prefer to use grad even if they have the option little farther of a paved runway?

[@tbobborap1]

simple - tarmac destroys models when they come into contact with it, if a £20,000 jet tips a wing onto tarmac when landing across the wind then that wing will be torn open in seconds (same for any model) and the wing will have to be repaired or replaced (very expensive) grass does no damage at all - simple

[@stevesplace7230]

11:42 "Is that hot?" "No, it just doesn't take me long to look at it."

[@Thanatos9029]

At least some of them got off with relatively minor damage.

[@baptisteoddon2323]

first

[@lemonblitz8573]

2:29 Focke-Wulf FW 190 , First ever Failed Takeoff , 1939 [Colorized]

[@yanisboucherit6565]

00:20 nice machingun

[@RCJunky]

They always say.. the first thing you buy after completing your model is a Black bag to bring it home in.

[@brynosaurs363]

Kids with money. I love it tho

[@perhamburger4305]

Det er fedt at se .¥

[@jasona-EV]

Name of plane coming in gear up starting at 4:51? It looks like a Cirrus Vision jet but is lacking the rear inverted tail fins. Great landing though

[@mikeday62]

It's so sad when some people disrespect the scattered debris that used to be your airplane.

[@josipvrandecic2472]

It is not pleasant to watch, but it is exciting and instructive. I have a feeling (maybe wrong) some builders are neglecting strength due to less a weight of models , but they paid the price.

[@tbobborap1]

thanks Josip, I think your right,

[@billville111]

no - airplanes do not survive crashes like cars do

[@squach6239]

Josip Vrandecic Yeah I think your right man! Give up a little performance for landing gear beef up in particular! Some of these mishaps with the nose gear gettin wiped off and just collapsing in general seem like things are a little to weak!

[@alexfranco7325]

Josip Vrandecic v cfggnfcfvg gnajhdugkpkfk

[@fatcat4155]

These can't be cheap. I wonder what the cost is on some of those cool jets.

[@tbobborap1]

£8,000 to £15,000 +