RC Plane project for world speed record

✈ instagram: / ivan.markov.avia
✈ facebook: / ivan.markov.avia
.

[@GrantOakes]

I'm impressed with your determination and the research you've done. It's clear that this isn't just a dream, you have a real shot at accomplishing your goal. Please post an update.

[@yaqshanullah]

Bro made his own jet engine when he couldn't afford it, this is some Tony Stark vibe

[@iamsick5204]

Elon musk vibes

[@yaqshanullah]

@@iamsick5204 Nah man Elon is just hyped he's not a genius

[@iamsick5204]

@@yaqshanullah Elon wanted to buy a Russian rocket but he thought it was too expensive so he started his own company... The character of tony stark takes some inspiration from Elon.

[@transgender_F-117]

@@iamsick5204 yea like being a twat sometimes

[@theecstatic9686]

Except that Tony Stark is a billionaire playboy that can afford anything he wants....

[@DashieDasher]

I really love how every other sentence is another, "I was put in touch with someone who specializes in something like this" moment. Getting help and learning from professionals is the best way to improve

[@atompower6267]

This is what engineering is supposed to be, identifying the problem and synthesizing a solution through a lot of research and testing while breaking a lot of stuff along the way. I wish you the best of luck with your project.

[@jet4fun54]

I don't know if an autopilot assist is allowed by the rules but at those speeds, keeping the airplane in sight and under control has to be extremely difficult.

[@ivanmarkovavia]

Autopilot is not allowed for the record. But during the flight I will be changing elevon rates for different speeds.

[@9HighFlyer9]

There's probably weapons laws that would come into effect with an autopilot. With a preprogrammed path it's essentially a cruise missile.

[@frogsoisuoiusd7326]

Fpv could make it easier right?

[@FishbedMyBeloved]

@@9HighFlyer9 Well lockheed martin builds them. Just get a federal permit.

[@Ozzy3333333]

Not sure gps will output when going that fast, to avoid using it for the wrong stuff. Look at the latest unlox chipset for more info.

[@redriver4447]

Ivan's project is a dramatic effort, particularly the engine, that is a jewel of engineering. The one thing to remember is that a sailplane was flown approximately 80mph faster (548mph/882kph)two years ago. It is under Dynamic Soaring here, the sailplane (an original design and construction) is nearly or is getting to the transonic range of speed and is near faster than any aircraft from WWII or the 3Km FAI propeller powered aircraft. Keep trucking Ivan, a powered aircraft record is huge.

[@siriusalpha4254]

I just had this recommended by youtube. Incredible! I can not wait to see more of your progress. Not only does the aircraft look amazing but everything you are learning is very cool!

[@BadPractices]

I love everything about this. CNC, composites, Aerospace, and world records. Good luck man, I can’t wait to see you break that record.

[@crescentlive1]

bro this man has some serious connections like, getting funded by an actual Aeronautics company?!! I am simply impressed how supportive the people are in these kind of projects

[@Lozzie74]

That design looks HOT! I admire your “can do” attitude and the amount you have done yourself. Every time you’ve come across a part you needed, you took the attitude “I’ll build it”. You did it well.

[@eemelilaurila5803]

It's totally amazing how you have accomplished this. You didn't just stick with the internet and plans and just went for it. You totally show people that everything is possible if you are truly interested in it. ❤

[@Videolinquency]

Respect. I always love to find instances of theoretical competence in aeromodelling, and I consider your project a very welcome overdose. Thank you for not recognizing the concept 'impossible', and thank you for elevating our hobby to a level we can feel proud to be remotely connected to. The best of luck.

[@kevinbaird9763]

This project proves that if you have an interesting idea and you are good at explaining your concept to others, with the proper enthusiasm, you can accomplish great things. Good luck moving forward. Remember that failure is often a big part of success, don't give up.

[@xXFaillixXx]

I think your spacebar is broken xD

[@anthonystownsend]

That's amazing, I'm also working on a speed project but for a quadcopter, it good to see that I'm not the only one who dreams big and put a lot of hard work.

[@sillo4442]

"2:04 I got a crazy idea, I will build my own engine" 🤣🤣 We are all crazy in this shit

[@jagevt]

One engineer to another,this is amazing. Congratulations

[@The-KP]

Very impressed. Engineering is one of the universal languages, which unites people on this planet! Others being music, math, sciences, sports. Best of luck, hope you break the record!

[@KingJellyfishII]

Bloody hell what an amazing project, I wouldn't have thought designing a whole custom turbojet engine would be feasible, that's so incredibly impressive!

[@munzirataalsid6872]

This is incredible Ivan. I wish you luck! I am into aerospace and learning the Russian language as well. I will definitely get in touch with you!

[@daniillebedev4035]

Вау

[@fonwoolridge]

Wow! Im an avid aeromodeller and youtuber...This is some seriously impressive stuff here! Amongst other things - I see this guy is very good at networking - and utilising the help of others - a good skill to have! I build some RC models - Im not sure if im depressed or inspired after seeing this LOL! Bravo young man - I believe you will get the record!

[@solarflare623]

This man is the definition of if you want something done you do it yourself.

[@a.p.2356]

I hope you are a *very* skilled RC pilot. This thing is going to be incredibly difficult to fly, and you've got zero margin for error at those speeds. Good luck!

[@0x00zero]

not hard to fly, just takes a lot of sky. If you want to make it hard to fly, make it tail heavy. We do this on purpose for aerobatics, like in biplanes.

[@mwales2112]

Very cool. Dynamic Soaring, Transonic speed of 545 mph (without a motor)

[@steve00712]

Yeah they seem to forget them records.

[@littleseal833]

I'm late here, but I don't think they forget.. it's just a totally different thing!

[@abdulsaboorraza6691]

Wow I can only imagine how difficult it could be to control a supersonic UAV without visual assistance on the aircraft. Godspeed to you my friend.

[@BobrMorf]

приветствую всех любителей турбореактивной тяги!!)))

[@jotham123]

What a journey! Your passion shows. Keep going!

[@dasemifake]

I have my powerplant exam this week, and thinking about your project has given me lots of ideas for what I'll do after it

[@Solips1sm]

Очень крутое видео! Я бы был ужасно благодарен, если бы ты разобрал моделлинг и техническую специфику проэкта в более детальном видео - даже если бы это был бы стрим часа на 2-3 где ты больше рассказываешь о том, как прогрессировал - я бы поддержал с большим удовольствием !

[@brahmdempers1005]

the victory will be so much sweeter seeing that u make everything yourself. good luck. cant wait to see u destroy the current world record.

[@prodkirkwall]

That's sick that you just build an engine because you couldn't afford a pre-built one. That's dedication. Is it possible to get a hold of the 3d-engine you made, so i can make one aswell?

[@halfabee]

I have had experience of welding and machining Inconel and Nimonic alloys in the 70s and know how hard they can be to machine and weld. One of my projects was a high temperature wind tunnel to analyze the wear on gas turbine engines for ships. Quite amazing they are now printing nimonic alloys

[@euphoriess]

Russian engineers never fail to amaze me with their craziness and their ambitous projects I once followed a Russian guy who has built his own mini jet engine from scratch I wish you can complete this aircraft ASAP, can't wait to see it break the record

[@mirekslechta7161]

Perfect video. Thank you from Czech Republic.

[@choubidoupl]

Complete this project and people will think you can make anything feasible. That'll lead you to very nice jobs. You are learning how to make people believe in you. This is how Elon Musk made it where he is. It's all money from others who can't make it happen. Go Ivan!

[@239giant2]

Wow Ivan,what a beautiful aircraft ,I hope your madian flight goes perfect. Please post more videos !

[@alexandregrynagier1762]

As a designer, i would have gone another way around: use the same engine, but instead make the aircraft more aerodynamically efficient. Which seems possible, with a reduced wingspan, and maybe take off assistance from a rocket motor or a towing aircraft or even a catapult/winch as the one used for the rc gliders. And maybe a more simple engine like a ram jet would be enough, with a leduc style air intake to erase as much drag as possible. But let's be honest, i wouldn't do it, because i don't have your knowledge. And i thank you for sharing about your dev! I wish you good luck!

[@KarelRode]

Skils, skils and more skils. I hear you doing one internship after the other. Many believe they MUST get a job because of training or some other attribute. You are doing it right and should be motivated to achieve your dream, but you will also be recognized for your talents, determination, and stamina to pursue a dream. Keep at it please and do update us.

[@crddrones3457]

God bless love the video , keep innovative!

[@sustainablenergy]

Those who have a why, can overcome any how. The future is built by those who seek obstacles and find a way to overcome all one at a time.if there is no solution to your problem, you create one . Well done. Great minds like you are the bridge between yesterday and tomorrow.

[@BirdstrikeJack]

you beat me Ivan. its hard to make an engine. that super steel frame might give some really good push. id be concerned about side gs mostly so take care of stability on that speed as you might reach mach number with afterburner. its good to have sponsors, tech ready :) so now i have to make a faster one. will wait for your record and i have some old design somewhere to challenge you ;) i think you'll burn it :) :P

[@seahippies]

Ivan your project will work I'm sure - Also congratulations on your English Language...Best wishes from Australia

[@ThePapanoob]

You are one huge madlad! Props to you this is amazing

[@glennjones5349]

It is an honor to be a subscriber of this channel. You are gifted, please continue with your work. Thank

[@DerekFischer]

Bro, there is COUNTRIES that doesn't have the technology to build its own jet engines and you studied, developed and built. That's freaking awesome!

[@scottiusnevious5143]

So young for such talent and discipline. Respect.

[@eofthetrees]

Broooooooo this is friggin sweeeeeeet i love the ingenuity!

[@aaronsorensen5165]

Good luck. You should find a company that makes the jets engines and see if they can calibrate the balance, tolerances and gaps on your engine. It will be crucial for the longevity of your engine.

[@smartaIec]

Amazing that you got sponsors! Truly a hobbyist's dreams come true.

[@Make-Asylums-Great-Again]

Ivan, you're a genius.

[@daniillebedev4035]

Буду следить за новыми видео, потому, как сам интересуюсь данной темой RC моделей, а тавже авиа и ракетных двигателей.

[@wayneschenk5512]

Being small will make it very difficult I’ve flown models mid 400s you need everything going for you. I believe to go maybe supersonic you would need some form of automation to handle the low visibility.

[@ivanmarkovavia]

My goal is 600-650mph. But initialy I wanted to make supersonic plane. According to my calculations to go supersonic I will need more thrust. Also supersonic speeds might require aileron reversal.

[@ariafpv]

​@@ivanmarkovaviamake it fpv at some point. That would be crazy to fly this fast in first person

[@dbdbdb1111111]

The sacrifices you do today are the ones you will not have to do later, trust me. And do not worry you'll have enough to buy 10 in a few years ... But then again even if you did have the money, why should you? Coming back to what I was saying, me being broke enabled me to learn and adapt. It was out of necessity. I need the thing to do the things or else I am screwed even worse than I am. This gave me knowledge and perspective. I have way more respect for the kid with a 5k car that's manual, does his own maintenance, is paid for, than the dude riding in his Maseratti maintained by the dealership owned by the bank at yolo costs.

[@shrekofficial5349]

I believe in you I am building my self a big rc project so I understand

[@prequelanimations539]

Let’s go Ivan

[@n4thawin]

Awesome! I wish you all the best! Good luck!

[@timour470]

this is the most amazing rc project i have ever seen. good luck my friend

[@FukU2222]

Proof that there is more to it all than just having deep pockets! Will-power and networking goes a long ways!

[@ludviglindhe1262]

guys im getting a bad vibe with a russian building a almost supersonic drone. nah man, really impressive

[@dempa3]

Молодчина! Очень интересно! Желаю великих успехов!

[@TulseLuper92]

Amazing! I really appreciate your undaunted approach, the world needs people like you. Good luck with your flight, keep us posted!

[@MythicBricks]

this is incredible, can't wait to see it!

[@oldschoolman1444]

It would be cool if someone could break the sound barrier! Maybe add winglets to help reduce drag.

[@wokekkk]

beautiful work

[@BuckJackson-kc8pb]

Salute all of your hard work and determination. I hope you set the record and go over Mach 1

[@seanbosse]

Very cool. Thank you for sharing!

[@Firstnameslastnames]

I wonder if you could take the Indy car method of non mechanical airfoil manipulation with various methods of laying the carbon fiber. Maybe under high speed the wings can be manipulated to provide a different airfoils characteristics. I probably sound dumb, but it was a free thought.

[@LeeMooEez]

They backup you because they believe you’ll able to do that mission! 😍😍😍 hoping the best for you! And can’t wait for the result!

[@RCDUDEFPV]

Am on This train now, keep up the great work and BIG Thumbs up

[@makermandan]

Earned my sub. Looking forward to seeing the result!

[@TheNdege1]

Blessings on your journey. Don't give up, we are waiting to see what your project.

[@smsandel]

Ivan, this is an incredible project and very exciting to see your persistence to achieve this goal. You could setup some crowdfunding account to help you fund this and I would help because projects like this are what inspires younger students to enter the aerospace and materials engineering fields where we need more new and curious minds like yours to advance our technology for the future of humanity.

[@jstewart627]

Did you know a glider went 548 mph using 30 mph winds off a mountain? It is driven both by pilot and computer. The circle it completes is under 2 seconds. So not that fun to fly. 120g of force so the weight is distributed into the wings.

[@davidmorford2845]

I met a man who knew someone that put me in touch with someone who puts people in touch with people and now I will break the record. Dude, I wish I had a 10th of your drive. I believe you will succeed. I saw that same record-breaking video when it came out. Afterward, I just went to bed. You must have stayed up and said to yourself "I must break that record".

[@WizemanJSY]

I wish you Good luck . Very impressive determination

[@Truroben]

This is fascinating, keep up the good work!

[@chriskahle5863]

FPV it!!!! Amazing work.

[@GilchristMcGill]

Am subscribing, from 304 to 305 😃😉

[@nithikasandinu9034]

Interesting project 😀. Keep it up

[@mihirthosar6560]

Amazing determination you got there! Really liked the amount of progress you're making!

[@dc-ic5lj]

I look forward to seeing your progress.

[@aravindshreyas3571]

Good luck and I wish you the very best for this project.

[@marcfalomirvila2531]

Now you have become an inspiration for the engineer I want to be. The only think you deserve is success!!

[@brealistic3542]

I really hope you go supersonic with your plane. Just one thing. At these speeds it will be extremely difficult to control. You should have a on board autopilot and a capability to fly it from the cockpit like many RD pilots do now with a onboard camera in the plane. I am really glad your trying this and really hope you succeed buddy. You have a lot of technical support I can see. That is wonderful.

[@WinterCharmVT]

Love this project! Hope to see it fly soon!

[@raymondo162]

it would be an understatement to say i'm impressed. rock on mate / komrad

[@rsmstudio4634]

Так держать!👍

[@CanineDefenseTechnologies]

Subcribed, very very excited for this project!

[@crxgames]

This is awesome, man! Keep it up!

[@matveygal]

Братан, удачи тебе в этом проекте! надеюсь все получится)

[@pauljs75]

Good luck. In the hobbyist realm, it seems no powered aircraft have come within range of the transonic speeds of dynamic soaring gliders - and those things are ridiculous. (Sometimes they shatter apart from the stresses of flying and explode into bits and pieces of fiberglass or carbon fiber before even hitting the ground.) The only remote controlled aircraft to go faster are owned and operated the governments of various countries.

[@notmenotme614]

How did you make the complex shape of the compressor and turbine blades? How did you get them perfectly balanced for high rpm? How did you make the turbine blades withstand high temperatures?

[@CyberLights0]

Finally somebody that i can relate too, i wanted to make my own jet too but i couldn't afford a model jet engine. This video inspired me to start thinking on how to make mine thanks dude!

[@RavenRaven-se6lr]

Massive congratulations

[@yaca_]

I love it and i believe in you ! They should make a film of your progress !

[@MrAli171]

Wow what a project good luck for the future

[@MaxGuides]

If your existing engine can get you up to speed you could get more power by building a mode-switching ramjet engine around it which simply moves the shock cone & opens internal intakes to bypass the turbojet engine once the blades of the engine itself start to get in the way. …just have to get going fast enough that you no longer need moving parts to get achieve the pressures required for the engine to operate & can just dump fuel in to achieve supersonic speeds. Go ceramic or liquid cooled shell. Also can play around with shape-memory alloys to replace hydraulics just by controlling the temperature of a metal rod.

[@jamesyoungquist6923]

Impressive work! I hope it doesn't get used to make attack drones

[@motionsic]

Ambitious goals. But you cannot safely fly RC plane by line of sight at those speeds, simply can not see. You will need to fit long distance FPV system to be able to see and fly properly. It’s a guided missile at that point. Good luck on your project!

[@unclephil2500]

I'm not sure if this would help with the problem of the underpowered engine, due to possible weight increase, nor if it would it even be needed because of the afterburner you designed ; but have you thought about using a ram/scramjet instead of the afterburner? you could use your underpowered engine to get the jet to an appropriate speed, then use the ram/scramjet to break the record and maybe even achieve Mach.

[@maksrodman809]

Nice man