Рет қаралды 4,715
More RC videos: / landoftheeagle
Subscribe! ► goo.gl/A5yHBz
I had a small delay with part 3/3 of Jeep Nukizer 715 v2.0, but it's finally here! Video shows how I made custom inner fender wells and floor panels (model: Vaterra Ascender with Axial Jeep Nukizer body), and how I waterproofed RC4WD winch controller. Yes, you can always pay $60 or more and order a finished product, but if you are on the budget, you can make fender wells and floor panels for a few bucks. In my case, it cost me nothing - some nice lady gave me the containers on a local market, and I already had the rest things like glues, rubber paint, plasti dip etc from my other projects. The only thing you need is TIME because believe me, it's a lot of cut a fit... Enjoy! :-)
If you didn't see the video from the building process of Jeep Nukizer v1.0, here's a link: • RC Project 2 | Axial J...
My other RC Projects: • Land Of The Eagle - RC...
If you like this project, subscribe - it's free! And a LiKE click is always appreciated :-)
---------------------------
Follow Land Of The Eagle on:
/ landoftheeagle
/ landoftheeagle
---------------------------
Useful links:
cutting / painting lexan body tutorial:
• RC Project 1 | Pro-Lin...
--------------------------
Body: Axial Racing - Jeep NuKizer 715 Body - .040" (Clear) AX31267
Chassis: 1986 Chevrolet K-5 Blazer Ascender 1:10 4WD RTR - Vaterra
---------------------------
What I used in this video:
4 food storage containers
3mm styrene sheet
Velcro
glue: Gorilla Glue / Zap Goo
rubber paint and plasti dip
electrical tape
hobby knife and some basic tools
---------------------------
Tracks from KZbin Audio Library:
Silent Partner - Midnight
Silent Partner - Pacific Hike