RC4wd C2X Hilux, Fabbing a Custom Bobbed Bed Scale RC

Found I had an old tamiya hilux bed laying around. Figured id take a stab at giving the C2X a real truck bed.
My Amazon Influencer store; amzn.to/2ZWzkYS

[@BullgearRCvideos]

Looks better with the bed👍

[@michaellenheiser3157]

Looks much better! 👍

[@glennvinicombe1668]

Looks "AWESOME" it's what RC 4WD should have done

[@ReadySetRC]

Really like how it came out. The blemishes are just character😁

[@mattzillarcworks6417]

Holy moly awesome work brother

[@seanhanley947]

The bobbed bed really finishes the truck the way it should've been.

[@stacygeorge7448]

Very cool 😎 can’t wait to see your wheel choice . I am learning a lot from your channel. Thank you . 🏎🔥💨

[@brianbeck7468]

Looks way better with the new bed!

[@waynetate9895]

That's a great look for that truck.

[@sophie28ize]

I think it looks great!! Stop being so hard on yourself. You do great work!!

[@Modellbau-Kanal]

Great Videos 👍👍👌Greetings Andy 🙋🏻‍♂️

[@ssamssamssamsson]

Yes! Truck looks complete now, the flatbed is cool but flows so much better with the bed now.

[@grski900000000000000]

Best C2X I've seen on YT 👍🏻

[@rcallterrain3440]

Congratulations friend excellent job I congratulate you

[@oldironsfury]

Nice hearing constructive criticism of your own work but man does that truck look perfect now !!! Awesome look, RC4WD needs to do this from the box !

[@thedave83]

Great looking truck look for ssd slots great wheels an that old school look

[@indybama80]

Nice job on the bedsides josh. Looks good. If u dont mind puttin a hole in the back of the cab, u could put a screw just inside the fender to keep it from pushin in n breakin off. All the more thats there, a screw with a nut under the screw head would give enuf for the fender to push against, but shouldnt b so much u can see the screw very easily

[@mutstumbo]

Looks awesome! I have fallen in love with this truck. It is on my list....in the front of the list of trucks to get. Thank you for your videos.

[@nicholasbarber4193]

Your bumper and that bobbed bed make it look way better! I liked how it looked stock, but those have both proven to be major improvements. I'd leave it no bumper on the back.

[@sophie28ize]

I love how it came out. The imperfections are fine. It just shows that your human like most of us..Not everything has to be super perfect. I want to do something like that. Thanks For Sharing!!!

[@_Boxcar_]

Looks awesome. Can't wait to see it on the trail

[@brokenmalisharc272]

I think you did a great job I think it looks sick awesome

[@michaelhoyle2665]

Looks s lot better. Lot of work, but looks like it paid off.

[@richardfleming9243]

Very very sweet job.

[@12R1rcbashr]

WOW thats such a sweet truck very nice on that bed great job man happy bashing bud.

[@kinslersrccustoms6945]

And I think it changes the whole look of the truck I like it way better this way nice job

[@chrisgardner1431]

Lookin really good. Can’t wait to see what you come up with for it next

[@krashkingrc9715]

awesome job made it look even better awesome video

[@One.eyedfisherman]

This came out awesome. I just ordered a c2x and was thinking about getting a Mojave II bed to do a bed. Happy i found this video. Good job man.

[@BlueDually4x4]

Put a red strip on the wheels, they already look like American Racing black wagon wheels. I like it better with the bed, and the imperfections make it look like the builder forgot about the bed after slapping full size axles and huge tires under the truck and just took a sawzall to the bed to make it work.

[@sefferrr]

Also I wonder if anyone will ever make a 3D printed bed for this body that would be so cool!

[@srbnut2226]

Grey is surprisingly hard to match. Truck looks more complete now.

[@robmorrissy1566]

Just when I didn't think I wanted that truck anymore You do this

[@jayr5331]

Looks GREAT!!!!!!!!!!!!

[@totalrc32]

Great craftsmanship!

[@brentpollock4137]

Awesome build keep up the good work. 👍👍👍👍

[@stonekoldkustomz8033]

They might be a little pricey, but I like the DuraTrax Deep Woods 2.2 tires and a black and chrome wheel combo, available from A-Main Hobbys, for $31.49 per pair. With those big fender cutouts, they should fit. As long as it's a 12 mm hex.

[@alexhardwick2855]

Awesome job I think it looks brilliant fair play.

[@boldrbangr9834]

Great job! Much cooler than stock.

[@frankmontoya341]

Great Work! 👊

[@irok1d]

Friggin sweet dude! Lots of work involved but worth it I even have a couple of old Tamiya beds i can cut up.

[@notorious4x4]

That is how it should have been. Great work.

[@JoshWeaverRC]

That looks great. I see a hi lift jack and a shovel looking great on it. I'm going to check out your Humvee video now.

[@sefferrr]

Awesome! Can you show us clocking the motor and possibly show us how you would modify the suspension to your likings? I remember you saying the rear could be slid forward to bring the rear down. Have an amazing day!

[@keithcarchide806]

Sick man looks awesome

[@jeffparryncc1701]

I've got to do this with a trx4 defender body. I'm making an extended rear bed and which will make it a single cab. This video will help a lot. Thanks for sharing. (see Defender Perentie)

[@HBGEB]

Great video. You’re very creative and talented. Keep put out the vids. Awesome music also. Thx.

[@rcsnapon2132]

Looks better with the bed good job 👍

[@rccrawlersmid-wales645]

That looks brilliant. Top work!

[@kevinperry5458]

Killer ,,, you are the master!!!!!

[@fatboymig1]

Great job

[@Firewlkre]

Looks great! I think some full link side decals or pinstriping from front to back would help to tie the whole thing together.Hope fully the aftermarket will come up with something also to add to that unfinished looking flatbed.I bet a roll bar would look good added to yours.Or maybe a canopy? Really enjoy your channel and i am a "new" subscriber and scale "convert"!

[@andyrichey1192]

Wow turned out awesome dude, I like it !!

[@jonmic4232]

Your bed fits perfect. Just my opinion. 👍

[@pedrodelacabra1855]

It's moderately perfect! Awesome job. I used to like the YO trucks too.

[@RegularGuy76]

Good work!!

[@devonspike8349]

Looks sick!!

[@allana5930]

It's a nice job definitely getting the Body Lines looking true now it just needs a so the tires and maybe some fresh paint all around unless you like that colour which case looks great

[@sgtlt]

looks great, awesome fab work

[@dezfan]

Looks fantastic!👍🏼

[@rcpete7055]

It's your truck or 'Yo' truck in the end its only your opinion that matters on our own trucks 👍

[@Beaten4.8]

If the paint matched and I didn't see the process I'd say that was factory. It really suits the truck and it came out awesome. It looks complete now

[@octane2099]

Those imperfections make it look scale

[@stwright318ify]

Looks great! If it was perfect it wouldn't be an off road truck!👊😁👍🇺🇸

[@kinslersrccustoms6945]

On the inside of the fender that isn't supported you can cut some Cyrene do the same shape as the fender glue it to the inner Fender and then cut it so it matches the delron parts and then at least secure a little more rigid

[@operation11charlieinc]

Amazing job brother

[@ridef1rst]

This looks amazing

[@williamgreen9307]

It looks awesome dude

[@williamschmidt8020]

Nice touch 🤙

[@davejohnson7755]

Spot on looks good like it should of.

[@ThisOldYota]

Where do you find this truck and what price should I expect? Thanks . Yours turned out well. Would like to find the 89-95 body as well

[@adamcuster3190]

The couple of imperfections look like bond-o, extra scale points.

[@charlesyoung8600]

Where's the music from? Thats fire. Great upload

[@kevinbreaker2683]

Great job looks great😎👍👍🇺🇲

[@STOLENM1NDS]

I'm gonna do the same but gonna buy a regular 4 door cab bob it in the rear I'm not into the bed that's on it awesome job on your bed look 100 percent better that way

[@altaga66]

Great work men!!!👍🤙👍

[@comeandtakeit5709]

What a cool truck I want one man. I’m new to the crawling scene and on the fence with what platform to start with.

[@RCeveryday]

Youve got to figure out if you are a crawler or a scale crawler, lol. SCX10 will out perform this thing all day. This C2X will look way more real crawling.

[@jamesn.449]

Injora 1.9 beadlocks are cheap on eBay and quality. Truck look great to me, a tf2 roll bar on the back might finish off the bed area nicely. Most likely need to be trimmed down to fit the height of the cab.

[@BobbyJr556]

Looks pretty cool! What about adding wood floors?

[@danielemulazzi7309]

Spettacolo !!!

[@irok1d]

Have a look at SSD wheels. Some great styles for a fair price and they mount up with no drama.

[@sb4pro]

Looks amazing I went with the Marlin instead though .

[@mrbrightsidewill5213]

Omg its amazing. Wonder if u can make more for sale?

[@imemovengeance]

You can get bed scanned and 3D printed to sell. Do a patina job on the body and use a sticker to cover up the tailgate cut through.

[@Nickwillfixit]

I really like the job, just as you would have seen with a budget crawler, steel wheels would fit the budget theme. I would have liked to see (rather not see) the mounting L bracket's, uder the bed would have been better, even in a channel so the bed slides on and off you would only see the bolt head's, itneeds a bit of square stock to cover the gap at the bottom of the tailgate inside. The fact the bed does not match the cab really say's made in my drive it does not need to match, a roll bar would be the finishing touch and a spare wedged in the bed, to look work in progress. Cant wait to see where it goes, heat up the tailgate and push it in a bit right where the cut is, will look like he reversed into something, don't weather it.

[@fernsolo]

I like it 👍🏼

[@rckn-rndlwestvirginiarc4388]

I like it better with the bed

[@RYCOPZ]

Love it man. How'd you glue it?

[@RCeveryday]

I use JB plastic weld 2 part epoxy for gluing body things.

[@RYCOPZ]

Thanks man. I have a bed I’m about to bob for my C2X and the right glue was the missing link in my plan!

[@keithcarchide806]

What about the marlin rims bet they'd look cool

[@jkotva22]

WOW!!!

[@Del350K4]

I think it looks great : )

[@jrsantoyo9028]

I think ima build a aluminum bed/roll cage type of bed

[@ahmad_oni]

This is RAD

[@DEeMONsworld]

very nice "proof of concept", If you or someone else wanted to improve upon it all the design work has been done. Excellent. looks good overall just needs some more fastening points and dressing up if desired.

[@JoseHernandez-yv3nt]

👌👌👌👍👍👍👍

[@jeffbearden2059]

A few scale accessories, it will look more rugged

[@davidarnold2427]

YO! i like it

[@IgnisMan]

Looks Great ;-)

[@JUNXRCZ]

Badass

[@mikecoaker5133]

decent! weather it up just a touch man, a couple small dents ! you could stick one of those chinese roll bars on it. be sweet