RCA TV: How to Control without Remote (Turn TV ON/OFF, Change Channel/Volume, Source/Input, Menu

I show you how control your RCA TV (this is not a smart TV) without using the remote. You can use the button on back of the TV to turn tv off/on, change volume or channels, source/input (HMDI), as well as bring up the menu. This is a 50" 4k Ultra HD (RLDED5098-UHD) that I got from walmart.com. Hope this helps.
Amazon Daily Deals: amzn.to/2QVcoRC
----My Gear for KZbin videos----
Main Camera 99% (smartphone): amzn.to/2utQFGH
Tripod: amzn.to/2xxpKcw
Cell Phone Tripod Adapter: amzn.to/2iM4Kw5
Selfie Stick/Tripod: amzn.to/2iK2Agu
Microphone: amzn.to/2xTAw13
Lights: amzn.to/2xVa5Ic
Electric Desk: amzn.to/2LLyzqU
Dual Device Tripod Setup w/ Hand Grip : amzn.to/2sOXuC2
Cheap Video Editor: bit.ly/2HdAMb7
Business inquires: [e-mail]
Twitter- / worldoftech11
Disclaimer: The above links are affiliate links meaning if you buy products using those links i will receive a small commission.
Also i am not responsible should anything go wrong so do at your own risk!

[@Alec_Rock]

EVERYONE, when hovering over the channel you want to select on source/input, you have to hold +volume

[@batskulls1957]

thank you so much i’ve been searching everywhere just for this one question.

[@Alec_Rock]

@@batskulls1957 no problem, I found the answer in a reply of a comment and I wanted to share it

[@Alec_Rock]

@Adam Cinq-Mars thanks man, I'm glad I helped👍

[@Lastpersonn999]

@@batskulls1957 me too 😭😭😭

[@sarahvictoria1419]

Top tier comment!

[@jengsmukbangofficial7047]

How can you enter when you want to change in HDMI to AV

[@DrewForDrew]

I have this exact TV nearly. A bit different but menu looks identical. I’m having a issue where every time my TV turns on and off the HDMI MODE is reset… I use “Graphic” but it always resets itself to “Auto” it seems…

[@boominator64]

On my Westinghouse 55” flatscreen I inherited had no remote. The buttons in the back are the same as you showed on the RCA. Which of those buttons is the SET button. I get to what I want but no matter what button I press I cannot get what I chose to set to move on to the next part. No body mentions this in their videos. Can you please help me or am I wasting my time responding ?

[@Lilsmokie_23]

Can this tv be connected to the wifi/ internet because I got one exactly like this one..??

[@kathleennorton6108]

In the new place I hooked my cable to the place that brings in the buildings antenna. Only on cable setting it brought in over 200 channels. But the channel up and down only let 4 channels come in that are blank except one with emergency alert letters on it. How can I get the 200+ stations to be accessed, and manually changed, please?

[@lany_07gaming]

Nice info as always.👍

[@abbeyp8834]

I cant enter "run channel auto scan". Any ideas? Trying to set up Pro Crystal HD antenna

[@nima5398]

Thanks bro helped me a lot

[@codiegentles9986]

But how do you select the once you hit where you going that was my whole reason of coming here is how do I select it I can go up and down but once I go up and down how do I select

[@Alec_Rock]

Hold +volume, you've probably figured it out by now tho

[@johanfriesen6851]

@@Alec_Rock Thank you good sir, the information I needed

[@deefee9453]

@@Alec_Rock almost threw my tv away appreciate it fam😂

[@themainmanme6940]

@@Alec_Rock thank you Mr. bruh. This is valuable information

[@marixalilith]

@@Alec_Rock When i hold the +volume all it does is making the volume go up but i cant select anything from the Input still.

[@mySeaPrince_]

For OK... Press and hold +volume.. or both channel or both volume buttons... That covers most models...

[@FlorBantique]

i will try this too ..just to be able to watch tv..

[@jlg918]

Thank you

[@Omei3D]

Thank you the holding volume up worked for me

[@mySeaPrince_]

@@Omei3D Amazing I left this comment over a year ago.. if you buy a TV remote that does many TVs get advice on best one to get. Kindest regards 🐈

[@I_am_coming_back_in_2091]

thanks BROO

[@robinm9972]

do you know how to unlock the tv so that I can get my cable to work with it

[@johnhamletbasong7282]

Hey our TV is displaying keyboard locked. The remote even if changed the batteries still not working neither the buttons at the back. Please help

[@jihadalzanati2784]

Thanks u just saved me

[@xtianna.08]

Can you make a tutorial on how to get the blue floating thing back for screen sharing?I accidentally deleted it and I can't find it anywhere. I've held down onto the smart view notification and there's no 3 dots it just asking me if i want it to be a silent notification or alerting notification. Please help because now I can't watch it in full zoom

[@ChunkyPepperoni]

Holy fuck this video is useless.

[@aliawais7013]

I have question, I have the same tv but has only turn on/off buttons nothing else and I lost my remote for the tv and I was wondering how can I fix it. Any app recommendations or solutions would be appreciated

[@KingDune]

mine is the same

[@dianabueno2103]

How to rotate the screen in vertical view. I have the same model as the one in your video.

[@luqmaanzeadally4353]

Source button on my myros tv is not working. Screen remains on usb , i can't change it back to hdmi. Plz help

[@chriswarfield5657]

I notice your tv didn't go to Lock and channel. That's the problem I'm having. Do you know anything about this? thank you

[@bernadetterumpiag1046]

same with mine .it skips the channel icon...

[@GermanShepherdGaming1]

To everyone asking how you select the stores you just keep clicking the source button and when you click the source you want like HDMI two or something just don’t press nothing! Done!

[@patriciaharris4432]

I want to do a auto scan ok i can get it to autoscan but i cant slect it to make it start scanning how do i get it to scan channels the remote i have only changes the stations doesnt have a menue button on it so i can get to the auto scan but when i do volume up or down it dont select it moves it off it

[@Vxlenx]

Thank u so much

[@serious-cyrusnoelan8127]

Mine does not have those... Only has volume up/down and power...

[@FlorBantique]

this another RCA type tv I have small one 32cm/ i been 5 days busy upon purchase still i dont get //it says NO SIGNAL/ television/ today i buy new HDMI knowing i can watch tv / because the other one from old tv that is already/ not doing good../still i get sick of it that i turn off all/ now/ what ot do to watch television again? I like this tv only I dont know how to get SIGNAL???

[@aw5003]

How do I adjust brightness what button will I touch

[@kashytech]

What of gld tv to set from USB to dtv

[@watershed44]

*What do you do to get to "enter" your choice. eg say I want to to go auto scan channels, I can get there by scrolling with the channel + and - buttons but then how do I enter that command?*

[@rb194100]

Me too. How?

[@Briar08]

Yea this would be amazing to know so frustrating.

[@watershed44]

@@Briar08 I finally gave up looking for the answer and luckily I found an exact replacement for my RCA model RLDED4016A on ebay for 8 bucks. Type in " USARMT 6 in 1 single brand universal remote control "

[@joancastro7787]

how do you select the source tho you didn’t give that information

[@marixalilith]

exactly! im also looking for that same answer

[@mySeaPrince_]

Press and hold +volume.. or both channel or both volume buttons... That covers most models...

[@ajop4856]

how do you turn off voice guide on this TV model

[@calamcouzens2090]

How do I press ok or play on a tv without the remote?

[@SimilakChild]

My RLED3258A-C don't have a power button it has a standby button and for some reason it wont power on nor reset the TV and I don't have a remote for it and the universal ones don't work either.

[@mrpostnorts5259]

Same boat as you.

[@a_coneish_one4398]

every button on my remote worked except the power button, you just saved me.

[@MattRobloxYT1]

Nice

[@ebonysmith6845]

How do you turn the voice narration off?

[@sabongeroboys1465]

PLEASE MAKE A VIDEO ABOUT ONEPLUS ONE REBOOT LOOP FIX I HAVE A ONEPLUS ONE A0001 AND IT RESTARTS ENDLESSLY IT ONLY STOPS WHEN I CHARGE IT AND WHEN I REMOVE THE PLUG IT SUDDENLY SHUTS DOWN AND STARTS THE BOOT LOOP AGAIN PLEASE PLEASE PLEASE HELP!!!

[@lcdoesthings]

My RCA TV has no menu/source input buttons, just power, volume, and channel. The buttons are in the middle, under the RCA logo, if anyone knows where the menu/source input buttons are.

[@rosielily9984]

Following!

[@bahaalsingh7090]

I have the same problem did u find any solution for that ?

[@lcdoesthings]

@@bahaalsingh7090 sadly I don’t remember how I resolved it. However, it may depend on your tv’s model, as some don’t have menu buttons at all.

[@hautfenne]

no menu and source for me😫bought 2 diff. universal remote RCA and they are not working with my rca smart tv! Same trade but not working.tried all codes but nothing.

[@adellabryslan1734]

If this doesn't work for you, if holding down the volume plus doesn't work, On my old RCA tv I had to click the input and volume+ at the same time to select my input option.

[@celisecalderon234]

Yeah but how to select the input

[@branflakesbrix8770]

Ye how

[@lillcutie6189]

Press both volume buttons at the same time it took me so long to figure that out 😭

[@kayla7376]

@@lillcutie6189 Thank you so much this is so helpful!!!

[@sh0]

Tfw the video is totally useless and the real info is in the comments.

[@lechic5660]

@@lillcutie6189 Thank youuuuuuu this is the REAAAAALL ANSWER GODD THANKS

[@jadeneversole8802]

My dad has a rca with the power button in the middle and no other buttons i cant find anything about it

[@biopyramid0384]

How do i change channels through the source button?

[@6Uncles]

I have the same issue. Is there a way to "select"?

[@Alec_Rock]

Hold +volume when hovering over your channel

[@lillcutie6189]

Does no one know how to select on the input

[@jasper2114]

need this answer lol.

[@janicek871]

Mine was holding the + channel and after selecting it hold +volume for a second or two

[@Alec_Rock]

@@janicek871 OMG, your a life saver! Thank you!

[@janicek871]

@@Alec_Rock you're welcome ☺️

[@HockeyBox19]

@@janicek871 Thank you so much

[@chrislevisen1010]

cannot change source...it doesn't work because there is no way to move up or down. I tried volume but it reberts to volume up down. tried channel up down, but reverts to channel change. If you loose your remote you are truly screwed.

[@alexisigwe9216]

How do I get a full screen without remote

[@quteniggawayneja3824]

Mines won’t change and the buttons are working please help

[@devonlowey5862]

What if you don’t have any buttons on it and only on button but can somehow open the menu

[@bahaalsingh7090]

I have same problem did u find any solution for that ?

[@SoundKat]

my tv doesn't have any buttons expect on the back light the middle is on/off and right and left a volume and up and down do nothing how do I change channels

[@byrontackett228]

have u figured how to change it?

[@SoundKat]

@@byrontackett228 no

[@yoryanadejesus.sopranolirica]

Cómo conecto este TV a una WiFi sin cable por fa

[@gigikardashian1166]

So how do you press enter

[@MrMikeb8]

im looking for that also. i programmed a universal remote but all it does is it turns it on /off and volume control .

[@mySeaPrince_]

Press and hold +volume.. or both channel or both volume buttons... That covers most models...

[@darlenemontez6218]

I only have a menu button volume button and channel

[@joyyvelvet2003]

do how to change language in iPad but do Japanese to English

[@elflacoprettygarcia3976]

Como lo conecto a una red wifi sin control , respondeme por favor

[@yoryanadejesus.sopranolirica]

Yo quisiera saber ya averiguaste cómo conecto este TV a una WiFi ? Gracias por fa

[@not_a_gym_weeaboo_420]

There's no buttons on my TV

[@Canadiangamergirl8618]

Omg the title comes off like maybe you can talk to your TV. Lmao

[@user-dt1vc5gl8h]

My tv is dark I can only hear things. Not sure if the brightness is turned down but I don’t have a remote so I’m about to cry 😭

[@trainzman-harperman]

Hey im trying to run an auto scan but i can't seem to select yes with the buttons, any help?

[@patriciaharris4432]

Im trying to do the same thing but it wont select it

[@janicek871]

The kids played the switch and they lost the tv remote, my tv only has 5 buttons: power + - volume and + - channel and the buttons are unmarked 😬 I finally managed to go back to HDM1, it was a little tricky because I had to figure out which button was the menu and the ok, i would select HDM1 but it would stay HDM2 🤯 I had to hold the volume + for a few seconds.

[@CTCB1]

Yo thank you so much I used this to change the channel input because I was not able to do so. You saved me from not being able to let my little brother play the Xbox. Have a great day

[@janicek871]

@@CTCB1 you’re very welcome, glad to help. Thank you, hope you have a great day as well!

[@CTCB1]

@@janicek871 🙂

[@fabiolagarcia1945]

most helpful than the video! thanks!

[@janicek871]

@@fabiolagarcia1945 you’re welcome ☺️

[@FriedGuy-iq9px]

🚨 what if source button is non responsive

[@rosielily9984]

Ok but what do you do if your TV doesn’t have a menu button? These TVs are ridiculous

[@keniviasmith3453]

❤

[@jda2black]

Can't change channel

[@GamerPipes]

Hey my rca tv does not have a power button but it has all the other buttons on the side can anyone scrolling through the comments please help me turn it on???

[@liberwoman]

Ok but how to press 'Ok'

[@SL33PYGG]

What if I only have a power and volume button lmao

[@aw5003]

😂can i adjust brightness tv is justtoo light

[@cookwithsara6656]

Great information 👍nice sharing Stay blessed dear stay cnctd join us 👍

[@thogar1]

SMH!