VEVOR 20 Ton Air Hydraulic Bottle Jack Review - And Demo Too!!

[@RCInsiders]

Pick One Up Here - amzn.to/3qrpKLF

[@carnelsullivan6009]

Great video man, I just got this same jack and this info was very helpful.

[@RCInsiders]

Thanks man! Been a good jack so far. Thanks for dropping by & have a great day :)

[@silverperzon]

I picked up the HF version of this jack. Which looks exactly identical to this one aside from the color scheme, black handle pieces, reseal kit, and coming standard with the 1/4 air fitting. Got it when it was on sale. You kinda don’t want to crank down on the valve knob. It’ll wallow out the seal. Snug is enough. The older silver Pittsburg wasn’t the best. The hose would crumble and the main seals would leak. The newer red version that came out this year definitely looks and operates better.

[@RCInsiders]

Nice! How has it done for you so far? Good tip with the knob, snug is good. Thanks for dropping by & have a great day :) @RCInsiders

[@syncronisity1]

Love the hoodie!

[@RCInsiders]

Thanks!! We just won our 1st playoff game in 10 years!!! Let's GOoOoOoOo! Thanks for dropping by & have a great day :)

[@bluemax229]

So far, not very happy with mine. Just installed mine in a Harbor Freight 20-ton shop press, as a replacement for the 20-ton manual jack that comes with it. The air swivel fitting that is screwed into the cap of the air motor was cross-threaded. I was able to re-thread it correctly, but it will not lift past a couple inches, although the manual lever works fine. And yes I bleed the air and filled with hydraulic fluid to the bottom of the hole.

[@RCInsiders]

Hey Max, If you bled it & filled the hyd oil, I'm not sure the issue. Where did you buy it from?

[@hansjansen7047]

Mine works fine manually but not at all pneumatically. there must be an air pocket in the air part that has not escaped. I'm going to try cycling it so to air portion is down when on its side.

[@bluemax229]

@@hansjansen7047 You are in luck! I am going to tell you exactly how to make your jack work. You have the exact same problem I had. On the backside of the base there is a large Phillips head screw. Connect your air hose and squeeze the trigger. Keep it on. Unscrew the Phillips screw almost until it falls out. Then begin screwing it in slowly. As you get close to being tight, the cylinder will start to go up. You can tighten it the rest of the way. Your Jack has bled out the air that was causing the problem.

[@Savedbygrace27-g2q]

I don't have money to buy expensive forging press wondering if this would be something good to experiment with

[@RCInsiders]

How much pressure do you need?

[@neomatrix2722]

Exactly the video I was looking for I was at princess junco looking at these thinking that I would be able to Jack my cabin up thank you for a wonderful video I fully understand this and yes I'm going to buy a 20 ton question is there a minimum PSI that I need to be conscious of

[@RCInsiders]

Awesome! I have ran it with as little as 90 psi, but I think to get the best performance you should have 120. Let me know how it works out? Thanks for dropping by & have a great day :) @RCInsiders

[@islandrc-duke1972]

cool jack and review,have a great day brother

[@RCInsiders]

Thanks brother & you as well! Pretty sweet jack for sure :) Happy bashing!! @RCInsiders

[@rsgglo6362]

So could you control the pressure if you where to set the compressor at a certain psi would it surpass that set pressure or no ?

[@RCInsiders]

Hi, If your compressor has a regulator, you can control the pressure. Is that what you mean? Thanks for dropping by & have a great day :) @RCInsiders

[@jeffseyfert3640]

The original end that came on the bottle jack it could be fore Simi tractor stander hose connector. I think

[@RCInsiders]

Hi Jeff, Your guess is as good as mine. Although I have been driving for decades & have not seen this fitting on a rig. Easy enough to convert though :) Thanks for dropping by & have a great day! @RCInsiders

[@itsamemario8014]

For today's video he decided to see if he could get entered in the Guinness World Records for the number of times guys was said in one video, not sure how well he did, but must have been close.

[@RCInsiders]

LOL 😂 If things don't work out in your current role, I suppose you could try out stand up 🤪 Watcha think???

[@PFab]

Guys!

[@RCInsiders]

@@PFab 😁😁🤣🤣

[@lelearmi6186]

Would it be suitable for a hydraulic cylinder with a 110 mm bore diameter? . at most how much oil does it send every minute?

[@RCInsiders]

Hi, I will have to look into this when I get the chance. What would you be using the jack for? Thanks for dropping by & have a great day :) @RCInsiders

[@ryanclark1322]

What psi compressor do you use?

[@RCInsiders]

Hi, I have a 150 psi compressor, but I believe this jack will operate fine with 120 psi. I have even used similar jacks with 90 psi. Are you getting one of these jacks? Thanks for dropping by & have a great day :) @RCInsiders

[@prirodni_sokovi_pirusti]

Hello, I have a question. How strong and which compressor do I need for an air hydraulic jack?

[@RCInsiders]

Hi, Most jacks require 120 psi to operate efficiently. Do you have this model? Thanks for dropping by & have a great day :) @RCInsiders

[@prirodni_sokovi_pirusti]

@@RCInsiders No,i dont hawe that model i hawe 30t big torin jack 🙂

[@RCInsiders]

@@prirodni_sokovi_pirusti Nice! What are the psi requirements for that big jack?

[@prirodni_sokovi_pirusti]

@@RCInsiders Thats the thing i dont know i asking you for that information 😁 because i dont know anything about air compresors..

[@RCInsiders]

@prirodni_sokovi_pirusti here is compressor I have kzbin.info/www/bejne/mX6Vi5-qZr90aKcsi=Mj5yB4mhnKrpaHNa It's cheap quiet and will run almost any air tools :)

[@uksewingmachineservice7030]

Looks really good mate I could do with that great video mate Don 🤠🇬🇧👌👌👌👌

[@RCInsiders]

Thanks mate! A great bottle jack at a good price 👍👍 Have a great weekend! @RCInsiders

[@Limpid18]

Is it work with the standart home using 8 bar air compressors?

[@RCInsiders]

Hi As long as you can produce 120 psi of air. It will work. The max psi I believe is 200. What will you be lifting? It’s been a good jack so far. Thanks for dropping by and have a great day! @RCInsiders

[@Limpid18]

@@RCInsiders i want to build a log splitter but i am not sure if its enough. My compressor is 8bar and it shows 200psi. But generally i use it on 140 150 psi

[@RCInsiders]

@@Limpid18 It is a 40,000 lb jack so I think it has the strength to split logs. My only issue would be the possibility of hyd fluid leaking if the jack is horizontal. This sounds like a cool project. Let me know how it goes if you get the chance?

[@Limpid18]

@@RCInsiders thanks for advice, i will use it vertical way. Down side of the jack will push the log. I hope will start asap.i let you know. Thanks

[@maxmixrc]

Very nice review my friend 😊👍

[@RCInsiders]

Thanks buddy! A great bottle jack for a good price :) Thanks for dropping by & happy bashing my friend!! @RCInsiders

[@perryvallee3643]

I have one it works with the handle but not with air I put oil in line still nothing.

[@RCInsiders]

Hi, When did you buy it? How much psi is your compressor? What is your regulator set at? Thanks for dropping by & have a great day :) @RCInsiders

[@rob12449]

that fitting is a new style fitting which works with a new style quick connect, you'll see them at HF side by side.

[@RCInsiders]

Ah thanks Rob, I have not seen this before. I will not be converting all my air tools any time soon though :) Thanks for dropping by & have a great day! @RCInsiders

[@rob12449]

@@RCInsiders one important point I left out before my memory kicked in, the new style makes a more free air passage so you get more flow through it. you only need buy a dif quick coupler, I'm gonna try it both ways and see if there is a dif

[@RCInsiders]

@@rob12449 Cool. Let me know your opinion when you do?

[@rob12449]

@@RCInsiders update, sorry I was wrong, harbor freight does not carry that type, they seem to only be available from china, anyway I did purchase a high volume or free flowing kit from HF today: Merlin 4pc high flow aluminum coupler $9.99, item 63546 claims 2x air delivery. sorry for all the confusion.

[@RCInsiders]

@@rob12449 Thanks for the update my friend. Much appreciated

[@indymark4064]

Here in US, for most of us using 1/4", the standard is "M" style. The Milton Co. makes "color fit" fittings using colors to help ID the different styles. M is red, V is purple, A is green, T is blue. What came on the jack hose, is ????. It's from Communist CHINA. Look like yours works fine. I seen a lot of reviews of this jack with numerous problems, from cosmetic paint issues from shipping, needing to add oil, missing handle, to not working at all.

[@RCInsiders]

Thanks for the info Mark. I am still not sure what that fitting was. I did add oil to this jack. It is in the paperwork that comes with it that you NEED to add oil to the proper level. Other than that the jack has worked well. @RCInsiders

[@odgeetv8515]

Cool video my friend 😎 😀

[@RCInsiders]

Thank you! Cheers! Its a great jack :) @RCInsiders

[@marcoscampos6011]

What kind.oil use thanks

[@RCInsiders]

Hi Marcos, This is the oil I use in all hydraulic jacks - amzn.to/45FmrQY

[@MrPinolatino]

can it work horizontally?

[@RCInsiders]

Hi, I don't see why you couldn't. I think the only issue would be the possibility of leaking hyd fluid through the cylinder. I wouldn't keep it horizontal for long. Do what you need to do with the jack & check/fill hyd fluid level. What are you using it for? Have a great day :) @RCInsiders

[@MrPinolatino]

@@RCInsiders Hi rc, I was thinking about to build a table with scissor lifter design, but I think the full air compressor system it’s more appropriate for my purpose.

[@RCInsiders]

@@MrPinolatino Nice! Let me know how it works out :)

[@jitenderpanchal4017]

Kya pric h sar

[@RCInsiders]

Hi, I think they are around 80 or 90. Here is link to check - amzn.to/3qrpKLF Have a great day :) @RCInsiders

[@BottleJackBuddy]

Love it.

[@RCInsiders]

Thanks! Love bottle jacks 😜🤘😍 Thanks for dropping by & have a great day!! @RCInsiders

[@adamcadd]

the fitting depends on what part of the world your from, US is not the only country FYI

[@RCInsiders]

Awesome Adam, Can you explain what this fitting is? Do all your hoses and all fittings along the way, including your tools have this odd fitting? Just curious as I am in the USA & have never encountered this fitting on an air tool. Thanks for dropping by & have a great day :) @RCInsiders

[@ezzqudoosalebady1637]

Nice 💪

[@RCInsiders]

Thank you my friend! This is a great bottle jack 👍👍 Thanks for dropping by & have a great day :) @RCInsiders

[@tncountryboy06]

20 tons is not 44,000 lbs, its 40,000 lbs

[@RCInsiders]

From the manufacturer: "High Capacity: 20T: The load capacity can reach up to 20 Ton (44092 lbs), Max" 1 metric ton = 2204.62 20 x 2204.62 = 44092.4

[@joshbryant7363]

Thinking you have the wrong air pressure man…?

[@RCInsiders]

Hi Josh, had 150 in tank & tool outlet at 100. Does this sound good to you? What makes you think the pressure is wrong? Let me know & I'll give it a try :) Thanks for dropping by & have a great day @RCInsiders

[@rob12449]

@@RCInsiders I just bought this jack and it does recommend 120 - 200 psi, so the 150 sounds good but maybe opening up the regulator will speed it up?

[@RCInsiders]

@@rob12449 Possible. I'll see what I can do next time I use it.

[@noneyabuiznezz]

not an ADHD friendly video.... didnt really need 3 min on how to turn a jack screw

[@RCInsiders]

Well, at least your attention span was long enough to leave a comment 😜😂🤣 Seriously though, did you learn what you came to learn? Let me know if you have any questions. Thanks for dropping by & have a great day :) @RCInsiders

[@JohnFak-u8n]

man thats slow though .......

[@RCInsiders]

Hi, Yes, this is typical. The more lifting capacity, usually the slower the lift with a bottle jack. Other than the slow lift, it has been a good jack. Thanks for dropping by & have a great day :) @RCInsiders

[@jorsot8839]

Looks abit slow

[@RCInsiders]

Hi, Generally speaking, most bottle jacks are slow to rise. Been a good jack so far. Ill call this on a win 👍👍 Do you have one? Thanks for dropping by & have a great day :) @RCInsiders