Рет қаралды 1,714
BLUF: It's a good mini electric screwdriver. Better than the WowStick. It's about $50 right now (I think there's a $15-off coupon on Amazon).
Pros:
1.Good speed
2. Works as a drill for small holes (like servo arms)
3. Good ergonomics
4. Good torque
Cons:
1.Does NOT come with a 2mm Hex bit for some reason.
2. Must be in the case to charge via USB-C
3. No extension bit
4. Not super fast and easy to switch from drilling to driving.
xCool Mini Electric Screwdriver
Get it on Amazon: amzn.to/3N6g0hU
10% off code: 10RCwithAdam
Get it on official website: www.coolgadget...
10% off code: RCADAM
4mm shank bit set on Amazon: amzn.to/3Y7kwTC
Even cheaper non-electric driver set with a 2mm hex bit: amzn.to/4eJe36U
An honorable mention, the Harbor Freight driver set: www.harborfrei...
McMaster-Carr individual bits (I think these will work probably): www.mcmaster.c...
Disclosure: xCool sent this driver to me for free to do this video and I get to keep the product. All my opinions are my own.
3D-Fuel is my favorite PLA+ for durability and practical prints: www.3dfuel.com... use code RCWITHADAM for 10% off.
🧠🛠️🛫 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwi...
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam